Haier 1407 Owner's manual

Category
CRT TVs
Type
Owner's manual

This manual is also suitable for

Please READ this manual carefully
before operating the unit, and keep
it for future reference.
COLOR TV RECEIVER
OWNER'S MANUAL
The Owner`s Manual for the Follow Models:
21F9D-P, 21T9D-P,21F9D,21T9D,1407
Downloaded from www.Manualslib.com manuals search engine
CONTENTS
Before Operation
Basic operation
Warning and cautions............................................................................2
Installation...............................................................................................3
Aerial connection...................................................................................3
Preparation of the remote control unit...................................................3
Function buttons and external sockets................................................4
Front panel of the TV set........................................................................4
Rear panel of the TV set........................................................................4
Buttons on the remote control..............................................................5
Switching on/off the TV set....................................................................6
Watching TV program.............................................................................7
Watching TV program...........................................................................7
Program swap and auto scan functions................................................8
Searching channel..................................................................................9
Full automatic search mode..................................................................9
Semi-automatic search.......................................................................10
Program skip ......................................................................................12
Convenient picture and sound control functions.............................
.........................................................................23
Specifications.......................................................................................24
Manual fine tune..................................................................................11
Position exchange function.................................................................21
Others
Multiple picture modes ......................................................................13
Black stretch and noise reduce...........................................................14
Mute function......................................................................................15
Time functions......................................................................................16
Clock setting and timer on/off functions...........................................16
Sleep timer and program preset ......................................................17
Setup function ....................................................................................18
Screen saver and child lock functions................................................18
AVL and calendar functions................................................................19
Select language..................................................................................20
Connection to the external audio and video equipment..................22
Troubleshooting guide
13
*Please read this manual carefully before using your television and keep this
manual in a good place for future reference.
Downloaded from www.Manualslib.com manuals search engine
Warning and cautions
1. When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
4. Do not place the TV set near rain or
moisture as it may cause an electric
shock, or the TV set to catch fire. The
TV set must only
be used in dry in
door locations.
2. In order to prolong the using life of
the TV set, please place it in a well
ventilated location.
5. The back cover must only be
removed by a registered electrical
service person. Removing the back
cover may result in electric shock, fire
or damage to
the TV set.
3. Don't place the TV
set in direct sunlight
or near a heat source.
6. If the TV set is not going to be used
for a long time, or there is a severe
thunder & Lighting storm, it is
recommended that the TV set be
disconnected from the AC power outlet
and the aerial plug removed.
Explanation on the display tube
In general, it is not needed to clean the tube surface. However, necessary,
it's surface can be cleaned with a dry cotton cloth after cutting off the power.
Don't use any cleanser. If using hard cloth, the tube surface will be damaged.
Downloaded from www.Manualslib.com manuals search engine
Installation
Aerial connection
Battery installation
Take off the battery compartment cover. Place two AAA batteries, make sure that battery
polarity matches with the +/- mark inside the battery compartment.
300 twin-lead cable
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
Antenna adapter
(additional purchase)
75 coaxial cable
Plug
(additional purchase)
AC power socket
Antenna input
75 standard
coaxial type
Mixer
additional
purchase
Note
* It is recommended that you'd better use 75
* Don't bind antenna cable and power wire together.
coaxial cable to remove the
disturbance caused by airwave.
Preparation of the remote control unit
Operation notes for the remote control unit
Under normal conditions, the life time of batteries is one year.
If you don't intend to use the unit for a long period or the electricity of the batteries is
used up, remove the batteries to prevent batteries acid from leaking into the battery
compartment.
Don't throw your batteries into a fire. Dispose of your batteries with a specified method.
Avoid the falling and the wetting of the remote control unit.
Downloaded from www.Manualslib.com manuals search engine
Function buttons and external sockets
Note: The cabinet and buttons of TV is only for reference.
Rear panel of the TV set
Antenna input
EXT
TV SCRAT Terminal
Power switch
Power indicator
Sensor window
MENU
/
(input selector
AV TV
Volume up/ down
Channel selector
Audio Input
terminal
VIDEO
R
L
AUDIO
Video Input
terminal
1407
21F9D, 21F9D-P,
21T9D, 21T9D-P
Front and side panel of the TV set
If you want to connect the TV set to the other audio/video equipment, please
refer to P22.
Video
R-AUDIO-LVIDEO
Menu
TV/AV
switching
Volume up/ down
Channel position up/down
TV/AV
MENU
VOL-
VOL+
CH-
CH+
Power switch
Signal receiver
Power indicator
R/L Audio
Downloaded from www.Manualslib.com manuals search engine
Buttons on the remote control
Buttons and Descriptions
Mute Button
Press to conceal the sound of programs.
Stand by Button
Screen Display Button
Swap function Button
TV and AV Exchange Button
To exchanger between TV and
other available video inputs
Digital selector
Program number Button
Program scan Button
Time menu
Picture mode selection
Function menu
Menu Select/ Adjust Button
Use this button to adjust the menu,
the volume and the channels.
Tune menu
Picture menu
Exit screen display
MUTE POWER
CALL
SWAP
TV/AV
-/--
1 2 3
4 5 6
7 8 9
0
SCAN
TIME
P.STD
CH+
CH-
VOL
-
VOL
+
MENU
PICTURE
TUNE
EXIT
FUNCTION
Downloaded from www.Manualslib.com manuals search engine
POWER
Switching on/ off the TV set
In the following, the methods of using power switch and remote controller to switch
on/off power supply for the TV set will be explained.
Switching on/ off the TV set
Switching on/ off the TV set
1 Please press the power switch to switch on AC
power supply and the power indicator will light.
2 If the indicator is lighting in red, press the POWER
button on the remote control again.
Note
1 When you don't operate the TV set with a
remote control, you can turn on it directly
through pressing the P / on the TV set
(Child Lock must be turned off).
+ - buttons
2 If you want to exchange to standby status,
please press down the POWER button on the
remote control.
3 If you want to fully switch off the power supply
for the TV set, please press the power switch
button on the TV set.
Auto switch-off function
When the "Back" function is on, if an empty
channel is selected or the TV programs are
ended for the day, the power will be switched off 5
minutes later automatically. If the "OFF TIME" is
on, it will be switched off according to the
presetting time. The auto power off function does
not work under video input or when the
background is off.
(Note: If the "off timer" is less than 5 minutes, it
will be switched off automatically to the preset
Time. )
4
AUTO
BG
Downloaded from www.Manualslib.com manuals search engine
CH+
CH-
VOL
-
VOL
+
MENU
TUNE
CH+
CH-
VOL
-
VOL
+
MENU
1 2 3
4 5 6
7 8 9
0
Watching TV
Watching TV program
You can watch TV program in a preset channel.
How to select TV program
Select the desired program
Select the desired sound
1 Using "Program number" buttons
2 Using the CH+/- buttons
Press the CH+ button to select a channel number in number
direction.
Press the CH- button to select a channel number in number
direction.
increasing
decreasing
Press the VOL-/+ buttons on the remote or the front of the
TV set to adjust the volume level.
If picture colo r is abnormalu
Use the CH+/- buttons to select Colour then the
VOL-/+ buttons to . Press the
EXIT button to save the setting.
select the colour system.
If the colour or sound of a channel is abnormal
Directly enter the channel number with the numeric keypad
on the remote control.
To select channel numbers from 10 ~ 99 press [-/--] button
and enter the two digit channel number
To select channel numbers from 100 ~ 218 press [-/--] button
twice and enter the 3 digit channel number
If the picture sound is abnormal
Use the CH+/- buttons to select Sound then press the
VOL-/+ buttons to select the sound system.
TUNE
SOUND BG
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
COLOUR AUTO
The settings of the colo r
system or the sound system
may be wrong.
Press the TUNE button and
setting menu shown on the
right will display on the screen.
u
Downloaded from www.Manualslib.com manuals search engine
SCAN
SWAP
Watching TV continued
Swap function enables quick swap to the last watched program.
Auto scan function enables automatic successive scanning of all the programs in
memory with (each channel will last about 2 seconds)."OFF" skip status
Program swap and auto scan functions
Program swap
1
Suppose the channel number
you used just now is 8 and the
channel number you are using
is 18 (as shown in the figure).
2 If you want to return to the
last watched program channel
8, you can simply press the
SWAP button.
3 If you want to return to
channel 18, press the button
again. Through this function,
you can easily change
between the channel you are
using and the channel you
used last time.
18
AUTO
BG
8
AUTO
BG
18
AUTO
BG
Auto program scan
1 If you want to select a
desirable program, you may
scan all the TV programs in
memory. You can simply press
the SCAN button to do this. The
programs will appear one after
another from beginning to end
(each channel number will last
about 2 seconds).
2 If you want to stop the function
during auto scanning, simply
press the SCAN button again.
1
AUTO
BG
SCAN
2
AUTO
BG
SCAN
3
AUTO
BG
SCAN
1
AUTO
BG
Downloaded from www.Manualslib.com manuals search engine
CALL
CH+
CH-
VOL
-
VOL
+
MENU
TUNE
Searching channel
This TV set has three methods to set the channels, which are respectively full
automatic, semi automatic and manual fine tune.
-
In this section, how to use the remote control to set the channel is explained. You
can also use the buttons on the TV set to set channel.
Full automatic mode
1 Press the TUNE menu button ,
till the TUNING menu shown on
the right display on the screen.
2 buttons to
select "AUTO SEARCH".
Press the CH+/-
3 Press the VOL+ button to
ensure automatic search
function operates. All channels
now playing program will be
automatically preset in order .
,
the first program number will
display on the screen.
After the search has finished
Display function
Press the CALL button, then
the channel number and the
systems will be displayed on
the screen.
4
AUTO
BG
TUNE
SOUND BG
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
COLOUR AUTO
TUNE
COLOUR AUTO
SOUND BG
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
Downloaded from www.Manualslib.com manuals search engine
EXIT
CH+
CH-
VOL
-
VOL
+
MENU
TUNE
Searching channel
Continued
Semi-automatic search
Semi-automatic search
1 Press the CH+/- buttons or
PROGRAM NUMBER 0-9
buttons to choose desired
channels I.E. channel 1
2 Press the TUNE menu button ,
till the TUNING menu shown on
the right display on the screen.
3 buttons to
select " SEARCH".
Press the CH+/-
4 Press the VOL-/+ buttons to
start searching.
The VOL- down button is used
for lower side program search.
The VOL+ up button is used for
higher side program search.
Repeat this step, till find the
desired channel.
To turn off the on-screen menu
In general, after you press the MENU button, the menu
display (PICTURE, TIME
ETC.) will automatically disappear within 15 seconds. If you
want to eliminate these contents immediately, please press
the EXIT button.
item
, FUNCTION, TUNE, EXCHANGE,
1
AUTO
BG
1
TUNE
COLOUR AUTO
SOUND BG
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
AUTO SEARCH
FINE TUNE
Downloaded from www.Manualslib.com manuals search engine
CH+
CH-
VOL
-
VOL
+
MENU
TUNE
CH+
CH-
VOL
-
VOL
+
MENU
Searching channel
Continued
Manual fine tune
Manual fine tune
2 Press the TUNE menu button ,
till the TUNING menu shown on
the right display on the screen.
3 buttons to
select " FINE TUNE".
Press the CH+/-
4 Press the VOL-/+ buttons all
through to carry out fine tune,
till the best picture and sound
are obtained.
If the picture and/or sound are poor, try using the FINE
TUNE feature. Do not use this feature unless
reception is poor.
1 Press the CH+/- buttons or
PROGRAM NUMBER 0-9
button to choose desired
channels I.E. channel 1
1
1
AUTO
DK
TUNE
COLOUR AUTO
SOUND BG
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
AUTO SEARCH
FINE TUNE
FINE TUNE
152.25MHz
Downloaded from www.Manualslib.com manuals search engine
CH+
CH-
VOL
-
VOL
+
MENU
TUNE
CH+
CH-
VOL
-
VOL
+
MENU
Searching channel
Continued
Program skip
Program skip
The Program skip feature enables you to skip/hide
programs that you do not wish to be displayed when
using the CH+/- buttons. These channels will still be
displayed by directly using the channel number
buttons on the remote control.
2 Press the TUNE menu button ,
till the TUNING menu shown on
the right display on the screen.
3 buttons to
select "SKIP".
Press the CH+/-
4 Press the VOL-/+ buttons to
turn the SKIP function "ON".
5 Press the TUNE button to close
the menu. When you use the CH /
buttons to select channel, this
channel will be skipped. However,
you can still use the PROGRAM
NUMBER buttons to select the
skipped channel numbers.
+-
If you want to recover the skipped channel
1 Use the PROGRAM NUMBER buttons to select the channel
number to be recovered.
2 Repeat those steps just now.
3 Press the VOL-/+ buttons to turn the SKIP function "OFF".
1 Press the CH+/- buttons or
PROGRAM NUMBER 0-9
button to choose desired
channels I.E. channel 1
1
AUTO
BG
TUNE
COLOUR AUTO
SOUND BG
BAND VHFL
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
SKIP OFF
TUNE
COLOUR AUTO
SOUND BG
BAND VHFL
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
SKIP ON
Downloaded from www.Manualslib.com manuals search engine
CH+
CH-
VOL
-
VOL
+
MENU
PICTURE
P.STD
Multiple picture modes
How to select picture modes
You can quickly select the desired picture mode from
four preset modes and one customized mode.
Convenient picture and sound control functions
Press the P.STD button to select the
desired picture quality. Five kinds
of picture modes (i.e.,
"RICH", "USER","LISTEN",
"SOFT" ) can be selected in turn.
"STANDARD",
USER
LISTEN
RICH
STANDARD
SOFT
How to customize your own picture status
1 Press the PICTURE menu button , till the menu
shown on the right display on the screen.
PICTURE
2 Press the CH+/- buttons to
select the item to adjusted,
then press the VOL-/+ buttons
to obtain the desired effect.
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
*Hue
Weak
Shallow
Dark
Soft
lean to purple
Strong
Deep
Bright
Sharp
lean to green
ITEM
Press VOL-
Press VOL+
Note:
The "Hue" item only appears when the colour system is NTSC.
PICTURE
BRIGHTNESS 32
COLOUR 48
SHARPNESS 40
*HUE 60
BLACK STRETCH OFF
CONTRAST 48
Downloaded from www.Manualslib.com manuals search engine
CH+
CH-
VOL
-
VOL
+
MENU
FUNCTION
CH+
CH-
VOL
-
VOL
+
MENU
PICTURE
Black stretch and noise reduce
Convenient picture and sound control functions
Continued
How to select BLACK STRETCH
How to select NOISE REDUCE
1 Press the menu
button , till the menu
shown on the right display on the
screen.
PICTURE
PICTURE
1 Press the FUNCTION menu
button, till the menu
shown on the right display on the
screen.
FUNCTION
2 button to
select "BLACK STRETCH".
Press the CH+/-
2 buttons to
select "NOISE REDUCE".
Press the CH+/-
3 Press the VOL-/+ buttons to
turn the BLACK STRETCH
function "ON" or "OFF".
3 Press the VOL-/+ buttons to
turn the NOISE REDUCE
function "ON" or "OFF".
PICTURE
BRIGHTNESS 32
COLOUR 48
SHARPNESS 40
*HUE 60
BLACK STRETCH OFF
CONTRAST 48
PICTURE
CONTRAST 48
BRIGHTNESS 32
COLOUR 48
SHARPNESS 40
*HUE 60
BLACK STRETCH ON
FUNCTION
BACKGROUND ON
NOISE REDUCE ON
FADE ON
CHILD LOCK OFF
AVL ON
CALENDAR
ENGLISH
FUNCTION
ENGLISH
BACKGROUND ON
FADE ON
CHILD LOCK OFF
AVL ON
CALENDAR
NOISE REDUCE OFF
Noise Reduce - (Picture Noise & Grain Reduction Circuit. Only use on poor reception.)
Black Stretch-(Automatically Increases the Contrast Rage)
Downloaded from www.Manualslib.com manuals search engine
MUTE
Convenient picture and sound control functions
Continued
MUTE
Sound mute
1 Press the MUTE button on the
remote control and "MUTE" type
face will display on the lower part
of the screen. At this time, the
sound of the TV set is turned off.
2 If you want to recover the sound,
press the MUTE button again or
directly press the VOL-/+ buttons.
Mute function
Downloaded from www.Manualslib.com manuals search engine
CH+
CH-
VOL
-
VOL
+
MENU
TIME
CH+
CH-
VOL
-
VOL
+
MENU
TIME
On/off timer
Clock setting
Time functions
Clock setting and timer on/off functions
1 Press the TIME button,
and the TIME menu display on
the screen.
menu
2Press the CH
.
+/- buttons select
"CLOCK", then press the VOL -
/+ buttons to adjust the time in
hour position; press again the
CH+/- buttons to select the
time in minute position, then
press the VOL -/ +buttons to
adjust the value of minutes
The clock will only work if the TV set if left turned on
or in standby. When the set is disconnect from the
power supply or is turned off by the main power on
the front panel, the clock loses power and will need to
be reset when the power is reconnected.
4 Repeat step 1-2 to set OFF
TIME.(take 23:00 as an example)
3 Press the CH+/- buttons to
select "ON PROG", then press
the VOL-/+ or program direct
number buttons to select your
desired channel (take 8 as an
example).
2 Press the CH+/- buttons to
select "ON TIME", then press
the VOL -/+ buttons to set the
value in hour position; press
again the CH+/- buttons to
select the minute position and
set the value of the minute.(take
18:00 as an example)
1 Press the TIME button
to call up the TIME menu on the
screen.
menu
Using on/off timer function, the TV set can automatically
turn on to a preset program or shut down in a preset time.
TIME
ON TIME 18:00
ON PROG 1
OFF TIME --:--
SLEEP TIMER 0
REMIND TIME --:--
REMIND PROG 1
CLOCK 17:18
TIME
ON TIME 18:00
ON PROG 1
OFF TIME --:--
SLEEP TIMER 0
REMIND TIME --:--
REMIND PROG 1
CLOCK 17:18
TIME
CLOCK 17:18
ON TIME 18:00
OFF TIME 23:00
SLEEP TIMER 0
REMIND TIME --:--
REMIND PROG 1
ON PROG 8
Downloaded from www.Manualslib.com manuals search engine
CH+
CH-
VOL
-
VOL
+
MENU
TIME
CH+
CH-
VOL
-
VOL
+
MENU
TIME
Sleep timer and program preset
Sleep timer
REMIND PROG function
The TV set have 18 sections
option
(each section has a time
interval of 10 minutes)
for sleep timer function
(See right
chart):
0
10
20
170
180
1 Press the TIME button,
and the TIME menu display on
the screen.
menu
2 Press the CH +/- buttons to
select "SLEEP TIMER".
3 Press the VOL -/+ buttons to
adjust the SLEEP TIMER level.
1 Press the TIME button
to call up the TIME menu on the
screen.
menu
2 Press the CH +/- buttons to
select "REMIND TIME", then
press the VOL -/+ buttons to
set the value in hour position;
press again the CH+/- buttons
to select the minute position,
and then set the value of the
minute.(take 19:00 as an
example)
3.Press the CH+/- buttons to
select "REMIND PROG", then
press the VOL -/+ buttons or
the program direct number
buttons to set the desired
channel (take 18 as an
example).
Time functions
Continued
TIME
ON TIME 18:00
ON PROG 8
OFF TIME 23:00
SLEEP TIMER 120
REMIND TIME --:--
REMIND PROG 1
CLOCK 17:18
TIME
CLOCK 17:18
ON TIME 18:00
ON PROG 8
OFF TIME 23:00
SLEEP TIMER 120
REMIND PROG 1
REMIND TIME 19:00
TIME
CLOCK 17:18
ON TIME 18:00
ON PROG 8
OFF TIME 23:00
SLEEP TIMER 120
REMIND TIME 19:00
REMIND PROG 18
NOTE: For
CHILD LOCK must be
turned off.
REMIND PROG to
operate
Program remind timer, that displays an on-screen reminder
prompt, when a program on a different channel is due to start.
Downloaded from www.Manualslib.com manuals search engine
CH+
CH-
VOL
-
VOL
+
MENU
FUNCTION
CH+
CH-
VOL
-
VOL
+
MENU
FUNCTION
NO SIGNAL
Set up function
Screen saver and childlock functions
How to start screen saver function
When the BACKGROUD function
is ON, the screen will turn
automatically as shown "NO
SIGNAL" of moving .
1 Press the FUNCTION menu
button till the menu
,
shown on the right display on the
screen.
FUNCTION
2 Press the CH+/- buttons
.
to
select "BACKGROUND" and press
the VOL-/+ buttons to turn the
BACKGROUND function "ON"
FUNCTION
ENGLISH
NOISE REDUCE ON
CHILD LOCK OFF
AVL ON
CALENDAR
BACKGROUND ON
1 Press the FUNCTION menu
button till the menu
,
shown on the right display on the
screen.
FUNCTION
2 Press the CH+/-
.
buttons to
select "CHILD LOCK" and press
the VOL-/+ buttons to turn
CHILD LOCK function "ON"
FUNCTION
ENGLISH
NOISE REDUCE ON
CHILD LOCK OFF
AVL ON
CALENDAR
BACKGROUND ON
Child lock function
NOTE:
All the control panel buttons on the front of the TV are disabled
when CHILD LOCK is turned on. The power switch will still turn
the TV set off.
Enables the TV front control buttons to be locked.
Downloaded from www.Manualslib.com manuals search engine
CH+
CH-
VOL
-
VOL
+
MENU
FUNCTION
CH+
CH-
VOL
-
VOL
+
MENU
FUNCTION
AVL and calendar functions
Set up function
Continued
1 Press the FUNCTION menu
button till the FUNCTION menu
,
shown on the right display
on the screen.
2 Press the CH+/-
.
button to select
"AVL"
3 Press
.
VOL-/+ button to turn the
AVL function "ON" or "OFF"
FUNCTION
BACKGROUND ON
NOISE REDUCE ON
CHILD LOCK OFF
AVL ON
CALENDAR
ENGLISH
1 Press the FUNCTION menu
button till the menu
,
shown on the right display on the
screen.
FUNCTION
3 Press the VOL-/+ buttons to turn
the YEAR/MONTH/DAY, press
CH+/- buttons to set or adjust
the YEAR/MONTH/DAY.
Calendar function
2 Press the CH+/-
button to select
"CALENDAR" , then press the
VOL-/+ buttons to the CALENDAR
display on the screen.
FUNCTION
ENGLISH
BACKGROUND ON
NOISE REDUCE ON
CHILD LOCK OFF
CALENDAR
AVL ON
AVL function
FUNCTION
ENGLISH
BACKGROUND ON
NOISE REDUCE ON
CHILD LOCK OFF
AVL ON
CALENDAR
Downloaded from www.Manualslib.com manuals search engine
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26

Haier 1407 Owner's manual

Category
CRT TVs
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI