ESN 5460/01
PRODUCT DESCRIPTION SHEET
DE FR BE NL
5019 410 53021
0 Off
Oven light
BOTTOM HEATING FUNCTION
Use:
- To finish baking fruitcakes or cheesecakes.
- To thicken sauces.
- Use the lower heating function for the last 10 or 15 minutes of cooking time.
STATIC FUNCTION
Use when all the food is on the same runner level.
- Pre-heat the oven to the required cooking temperature and place the food inside as soon as the red
thermostat indicator light switches off.
- Ideally, the shelf should be on the second runner level when using the static function.
GRILL FUNCTION
Use the grill function to cook small pieces of meat (steaks, sausages) and for making toasts.
- The oven door must be closed during the cooking cycle.
- Preheat the grill for about 5 minutes.
- Arrange the meat on the grid with the drip tray underneath. Pour water in the drip tray to cover the
bottom to reduce smoke and fat spatters.
- Turn over the meat about half-way through cooking time.
.
Turn the selector knob to the required symbol.
The oven light switches on.
• Turn the thermostat knob clockwise to the required temperature.
The red thermostat indicator light switches on.
• When the required temperature is reached, the red thermostat indicator light switches off.
End of cooking cycle:
• Return the knobs to the OFF position (0 - •).
OVEN
First
Last
First...Last: Runner positions
1. Control panel
2. Cooling fan (not visible)
3. Upper heating element
4. Grill element
5. Oven light
6. Lower heating element (not visible)
7. Oven door hinges
8. Oven cool door
Accessories:
•Grid
• Baking tray
CONTROL PANEL
1 Oven functions selector knob
2. Oven thermostat knob
3. Thermostat indicator light
4. Cooktop control knob (front left).
Functions: 0 1 ... 10 *
5. Cooktop control knob (rear left).
Functions: 0 1 ... 10 *
6. Cooktop control knob (rear right).
Functions: 0 1 ... 10 *
7. Cooktop control knob (front right).
Functions: 0 1 ... 10 *
8. Cooktop “ON” indicator light
*The cooktop control knobs are not interchangeable. After cleaning or servicing, they must be
returned to their original positions.
N.B.: The cooling fan runs continuously at two different speeds according to the temperature value
of the components when the appliances are in use. Full speed: for high temperature of the
components. Half speed pulsing: for low temperature of the components. The pulsing speed has to
be considered a normal appliance condition at half speed. The fan may continue to run for the time
necessary to ensure sufficient cooling of the components and adjacent kitchen units after the
appliances have been switched off.
OVEN FUNCTIONS
SWITCHING THE OVEN ON