Badger Basket 923 Assembly Instructions

Badger Basket
Brand
Badger Basket
Model
923
Type
Assembly Instructions

This manual is also suitable for

6.0/0309/TGPage 1 of 5
VERSION CODE:
6.0/0309/TG
MODEL NUMBERS:
BADGER BASKET CO.
Toll-Free Customer Service: 1-800-236-1310 (Monday to Thursday 7:30 AM-4:30 PM CST)
Web: http://www.badgerbasket.com/parts • E-mail: part[email protected]
Mail: PO Box 227, Edgar, WI 54426-0227 • Phone: 715-352-2311 • Fax: 715-352-3163
Manufactured Exclusively for OneStepAhead®
PO Box 517, Lake Bluff, IL 60044-0517
EURO II GROW WITH ME
HIGH CHAIR
Assembly Instructions.
Adult Assembly Required.
Read all instructions before use.
Save instructions for future use.
00921 -
Natural Euro II Grow With Me Chair
(One Step Ahead
®
#13301-NATU)
00923 -
Cherry Euro II Grow With Me Chair
(One Step Ahead
®
#13301-CHER)
6.0/0309/TG
BEFORE YOU BEGIN ASSEMBLY:
Check all parts and hardware. If anything is missing or not
satisfactory, please DO NOT call One Step Ahead or return the
product to them. Contact Badger Basket. Most problems are
resolved without you needing to leave home.
When contacting us,
please have this instruction manual, your product model number,
and your product version code ready. For fastest service, go to
http://www.badgerbasket.com/parts
Your Product Version Code is:
6.0/0309/TG
Read all instructions before beginning so you’ll be
familiar with the parts and their final positions.
Page 2 of 5
WARNING! FAILURE TO FOLLOW THESE
WARNINGS AND THE INSTRUCTIONS MAY
RESULT IN SERIOUS INJURY OR DEATH.
NEVER LEAVE CHILD UNATTENDED.
CARE INSTRUCTIONS:
Wipe the seat cushion with a damp cloth after each use;
periodically wipe down the chair with a damp cloth and mild detergent.
Chair is for use from three (3) years of age and up.
ALWAYS keep your child in view while in the chair.
NEVER leave your child unattended, not even for “just a minute”.
Once the chair is assembled and all the bolts are tightened, the seat
and footrest platforms SHOULD NOT HAVE ANY MOVEMENT front to
back or side-to-side.
If your seat and/or footrest is NOT FIRMLY HELD IN POSITION, DO
NOT USE THE CHAIR until you have contacted Badger Basket Co. for
assistance.
DO NOT use the high chair if any parts or hardware are broken or
missing.
REGULARLY check the bolts and retighten as needed using the
included allen wrench.
Parts listParts list
AB CD
1x Left Side 1x Right Side 1x Bottom Rail 2x Curved Back Pieces
IJKL
1x Allen Wrench 6x Long Bolts 4x Short Bolts 6xBarrel Nuts
EF GH
1x Seat Platform 1x Footrest Platform 1x Seat Cushion 2x Connecting Rods
M6x50mm M6x40mm M6x12mm
Save this wrench for
future use!
Page3of5 6.0/0309/TG
2
1
K
A
J
B
C
D
D
H
H
J
J
J
J
J
K
K
K
L
L
L
L
L
L
E
F
IJKL
1x Allen Wrench 6xLong Bolts 4xShort Bolts 6xBarrel Nuts
M6x50mm M6x40mm M6x12mm
TOOL
IMPORTANT: DO NOT TIGHTEN THE BOLTS UNTIL THE CHAIR IS FULLY ASSEMBLED
or you will not be able to insert the Seat and Footrest Platforms.
In the TOPMOST SEATING POSITION, the seat
platform MUST be pushed back until it stops and
will not slide in any further.
Footrest platform MUST be inserted so that at least
2 inches stick out the back.
1
2
Page4of5 6.0/0309/TG
3
G
Put the chair into its upright position on a flat, level floor. Level the chair, and then
securely tighten ALL of the bolts!
As your child grows you can loosen the bolts to change the position of the seat and
foot rest platforms. Be sure to level the chair and then retighten the bolts securely
whenever adjustments are made.
Page5of5 6.0/0309/TG
IMPORTANT: You MUST regularly check the bolts and retighten as needed
using the ALLEN WRENCH included with the chair.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Badger Basket 923 Assembly Instructions

Badger Basket
Brand
Badger Basket
Model
923
Type
Assembly Instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents