AMX AXC-REL8 Quick start guide

Type
Quick start guide

This manual is also suitable for

AMX AXC-REL8 8 RELAY CARD

The AMX AXC-REL8 8 RELAY CARD is a versatile device that allows you to control up to 8 relay-controlled functions with simple momentary or latching contact closure. It is ideal for controlling devices such as lights, fans, pumps, and gates.

The card features 8 individually assignable relays that can be configured as normally open (NO) or normally closed (NC) via jumpers provided on the card. This allows you to customize the card to meet your specific needs.

The card also has 8 LED indicators that provide visual feedback of the status of each relay. This makes it easy to see which relays are energized and which are not.

AMX AXC-REL8 8 RELAY CARD

The AMX AXC-REL8 8 RELAY CARD is a versatile device that allows you to control up to 8 relay-controlled functions with simple momentary or latching contact closure. It is ideal for controlling devices such as lights, fans, pumps, and gates.

The card features 8 individually assignable relays that can be configured as normally open (NO) or normally closed (NC) via jumpers provided on the card. This allows you to customize the card to meet your specific needs.

The card also has 8 LED indicators that provide visual feedback of the status of each relay. This makes it easy to see which relays are energized and which are not.

Quick Start Guide
AXC-REL8
Universal Eight Relay Card
Overview
Devices that require a simple momentary or latching contact closure can be
controlled with the AXC-REL8 Universal Eight Relay Card (FIG. 1). This
card can operate up to 8 relay-controlled functions; cards can be linked
together, allowing a larger number of functions. Adjacent relays on the card
may be selectively commoned to reduce device wiring.
Specifications
The table below provides specification information for the AXC-REL8
(FG715).
Connections
The table below lists the AXC-REL8 pinout connectors.
Commons
The table below lists the commons for the AXC-REL8 if installed in the On
position.
Relay Status LED Indicators
The table below provides a description for the illumination of each relay
LED. Refer to FIG. 2 for a visual reference of LED locations.
FIG. 1 AXC-REL8 Universal Eight Relay Card (side view)
Specifications
Power
Consumption:
150 mA, 12 VDC
Contact
Closures:
•8 per card
Relays: Single pole double throw (SPDT).
Each relay is individually assignable as normally open
(NO) or normally closed (NC) via jumpers provided on the
card.
Jumpers: JP1: Installed between center pin and NC, relay 1 is
Normally Closed; installed between center pin and NO,
relay 1 is Normally Open.
JP2: Same as JP1 for relays 2 - 8, respectively a jumper
must be in one of these locations for each relay used.
LEDs: CR1 - 8: Indicates energized condition of corresponding
relay
Contact Rating: 1 A @ 24 VAC / 28 VDC
750 mA MAX resistive load.
Pinout Connectors
Pinout Description
1 Common #1
2 Contact #1
3 Common #2
4 Contact #2
5 Common #3
6 Contact #3
7 Common #4
8 Contact #4
9 Common #5
10 Contact #5
11 Common #6
12 Contact #6
13 Common #7
14 Contact #7
15 Common #8
16 Contact #8
Commons
Commons Description
CO1 - 2 Connects Common #1 to Common #2.
CO2 - 3 Connects Common #2 to Common #3.
CO3 - 4 Connects Common #3 to Common #4.
CO4 - 5 Connects Common #4 to Common #5.
CO5 - 6 Connects Common #5 to Common #6.
CO6 - 7 Connects Common #6 to Common #7.
CO7 - 8 Connects Common #7 to Common #8.
Relay Status LEDs
Relay LED # Description
CR1 (top LED) Indicates the energized condition of relay 1.
CR2 Indicates the energized condition of relay 2.
CR3 Indicates the energized condition of relay 3.
CR4 Indicates the energized condition of relay 4.
CR5 Indicates the energized condition of relay 5.
CR6 Indicates the energized condition of relay 6.
CR7 Indicates the energized condition of relay 7.
CR8 Indicates the energized condition of relay 8.
FIG. 2 AXC-REL8 Relay status locations
Top LED
AMX Corporation reserves the right to alter specifications without notice at any time.
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
060-004-2692 2/05 ©2005
AMX Corporation. All rights reserved. The AMX logo is a trademark of AMX Corporation. AMX reserves the right to alter specifications without notice at any time.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
  • Page 1 1
  • Page 2 2

AMX AXC-REL8 Quick start guide

Type
Quick start guide
This manual is also suitable for

AMX AXC-REL8 8 RELAY CARD

The AMX AXC-REL8 8 RELAY CARD is a versatile device that allows you to control up to 8 relay-controlled functions with simple momentary or latching contact closure. It is ideal for controlling devices such as lights, fans, pumps, and gates.

The card features 8 individually assignable relays that can be configured as normally open (NO) or normally closed (NC) via jumpers provided on the card. This allows you to customize the card to meet your specific needs.

The card also has 8 LED indicators that provide visual feedback of the status of each relay. This makes it easy to see which relays are energized and which are not.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI