3M Adper™ Scotchbond™ Multi-Purpose Adhesive System Intro Kit, 7540S User guide

3M
Brand
3M
Model
Adper™ Scotchbond™ Multi-Purpose Adhesive System Intro Kit, 7540S
Type
User guide

This manual is also suitable for

PORCELAIN REPAIR
Adper
™
Scotchbond
™
Multi-Purpose
and Multi-Purpose Plus Adhesive Systems
1 of 2
Preparation:
• Isolate and clean the tooth.
Use a diamond to remove weakened
porcelain. Roughen alloy surfaces.
Bevel the margin and remove 1 mm of
surface glaze beyond the margin.
1
Etch:
• Apply Scotchbond
™
Etchant to
porcelain and alloy—wait 15 seconds.
• Rinse.
• Dry.
2
Silane Prime:
• Apply RelyX
™
Ceramic Primer to
porcelain and alloy surfaces.
• Dry.
3
4
5
PORCELAIN REPAIR
Adper
™
Scotchbond
™
Multi-Purpose
and Multi-Purpose Plus Adhesive Systems
2 of 2
Bond:
• Apply adhesive to the silane primed
surfaces.
• Light-cure for 10 seconds
Composite:
• Complete the repair with the Filtek
™
restorative of your choice.
3M ESPE Customer Care/MSDS Information:
U.S.A. 1-800-634-2249 and Canada 1-888-363-3685
3M, ESPE, Adper and Scotchbond are trademarks of 3M or 3M Deutschland GmbH.
Used under license in Canada. © 3M 2012. All rights reserved.
3M ESPE
Dental Products, 2510 Conway Avenue, St. Paul, MN 55144-1000 USA • www.3MESPE.com
44-0007-7266-3-A
  • Page 1 1
  • Page 2 2

3M Adper™ Scotchbond™ Multi-Purpose Adhesive System Intro Kit, 7540S User guide

3M
Brand
3M
Model
Adper™ Scotchbond™ Multi-Purpose Adhesive System Intro Kit, 7540S
Type
User guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents