3M Adper™ Single Bond Plus Adhesive Refill, 51102 User guide

DIRECT LIGHT-CURE RESTORATION

Adper

™

Single Bond Plus Adhesive

1 of 1

Etch:

• Apply Scotchbond

™

Etchant to enamel

and dentin. Wait 15 seconds.

• Rinse for 10 seconds.

• Blot excess water using a cotton pellet

or mini-sponge. Do not air dry.

• The surface should appear glistening

without pooling of water.

Adhesive:

• Immediately after blotting, apply 2-3

consecutive coats of adhesive for 15

seconds with gentle agitation using a

fully saturated applicator.

• Gently air thin for 5 seconds to

evaporate solvent.

Light-Cure:

• Light-cure for 10 seconds.

Restorative:

• Place restorative according to

manufacturer specifications.

3M ESPE Customer Hotline 1-800-634-2249 70-2009-3630-3

Please refer to instructions for more detailed information 44-0007-4208-8

3M, ESPE, Adper, and Scotchbond are trademarks of 3M or 3M ESPE AG.

This manual is also suitable for