Hantek HDP User guide

Brand: Hantek

Model: HDP

Type: User guide

Quick Guide

Programmable DC Power Supply

HDP43XX/44XX Series

V 1.1

Quick Guide

Qingdao Hantek Electronic Co., Ltd.

Statement

Qingdao Hantek Electronic Co., Ltd. reserves the right to amend this document without

prior notice. Qingdao Hantek Electronic Co., Ltd. promises that the information provided is

correct and reliable, but does not guarantee that this document is infallible. Please make

sure that the specifications of relevant technical documents used are the latest and valid

version yourself before using this product. If you require the cooperation of products,

patents or works of a third party when your company using the documents or products of

Qingdao Hantek Electronic Co., Ltd., your company shall be responsible for obtaining the

consent and authorization of the third party. The aforesaid consent and authorization are

not the responsibility of our company to guarantee.

Quick Guide

Technical Support

If you have any question or ambiguity in the process of using products of Qingdao Hantek

Electronic Co., Ltd., you can get the service and support through the following ways:

A: Please contact the local dealer of Qingdao Hantek Electronic Co., Ltd.;

B: Please contact the local office directly under Qingdao Hantek Electronic Co., Ltd;

C: Please contact the headquarters of Qingdao Hantek Electronic Co., Ltd.

Contact Method of our company:

Qingdao Hantek Electronic Co., Ltd.

http://www.hantek.com/en/index.html

Address: 35# Building No.780 Baoyuan Road, High-tech District, Qingdao China

Zip Code: 266114

Telephone: 0532-88705792

Fax: 0532-88705691

Email: [email protected]

Technical Support:

Telephone: 0532-88703687

Email: [email protected]

Quick Guide

Summary of general safety matters

General Safety Summary

Read the following safety precautions carefully to avoid injury and prevent damage to this

product or any product connected to this product. To avoid possible danger, be sure to use

this product as specified.

Avoid fire and personal injury.

Only professionally authorized personnel should perform repairs.

Use the correct power cord.

Use only the power cord specified for this product in your country.

Connect and disconnect properly.

Select the correct AC power input gear and input the AC voltage within its allowable range.

Please turn off the power before connecting to the output terminal. Before powering off the

instrument, disconnect the load it carries and then power off.

Ground the product.

To avoid electric shock, the product is grounded through the grounding conductor of the

power cord. The grounding conductor must be connected to ground. Before connecting the

input or output of the product, be sure to ground the product properly.

View all terminal ratings.

To avoid fire or the impact of excessive current, check all ratings and markings on the

product. Please consult the product manual for details on ratings before connecting the

product.

Use proper overvoltage protection.

Make sure that no over voltages (such as those caused by lightning) reach the product.

Otherwise, the operator may be exposed to electric shock.

Do not open the cover.

Do not operate the product with the cover or panel open.

Maintain proper ventilation.

Poor ventilation will increase the temperature of the instrument and cause damage to the

instrument. Good ventilation should be maintained during use, and the vents and fans

should be checked regularly.

Use a suitable fuse.

Quick Guide

Only use fuses specified for this product.

Avoid exposed circuits.

Do not touch exposed connectors and components after power is turned on.

Do not operate the product if you suspect it is malfunctioning.

If the user suspects that this product has been damaged, have it inspected by qualified

service personnel.

Do not operate in a humid environment.

To avoid the danger of short circuit or electric shock inside the instrument, do not operate

the instrument in a humid environment.

Do not operate in a flammable or explosive environment.

To avoid damage to the instrument or personal injury, do not operate the instrument in a

flammable or explosive environment.

Keep the surface of the product clean and dry.

To prevent dust or moisture in the air from affecting the performance of the instrument,

keep the product surface clean and dry.

Anti-static protection.

Static electricity can cause damage to the instrument. Test in an anti-static area whenever

possible. Before connecting the cable to the instrument, ground its inner and outer

conductors briefly to discharge static electricity.

Pay attention to handling safety.

In order to avoid the instrument falling down during transportation, which may cause

damage to the buttons, knobs, or interfaces on the instrument panel, please pay attention

to transportation safety.

Safety terms and symbols

Product terminology. The following terms may appear on the product:

DANGER

It indicates that if you do this, you may cause immediate damage to the user.

WARNING

It indicates that the user may not immediately harm the user if they do this.

CAUTION

It indicates that the user may cause damage to this product or other property if this operation is performed.

Product symbol. The following symbols may appear on the product:

Quick Guide

Safety Warning Protective Test Ground Shell Earth Terminal

Ventilation requirements

Make sure that the exhaust area is not blocked and has free flowing air. To ensure

adequate ventilation, when using the power supply in a workbench or rack, make sure that

there should be a gap of at least 10 cm on both sides, above, and behind it.

WARNING

Poor ventilation will increase the temperature of the instrument and cause damage to the instrument.

Good ventilation should be maintained during use. Regularly check the vents and fans.

Working environment

Temperature

During operation: 0℃to 50℃

Non-operating: -40℃to 70℃

Humidity

0℃to 30℃: 95% relative humidity.

30℃to 40℃: 75% relative humidity.

40℃to 50℃: 45% relative humidity.

WARNING

To avoid the danger of short circuit or electric shock inside the instrument, do not operate the

instrument in a humid environment.

Altitude

When operating: below 3000 meters.

Non-operating: below 15000 meters.

Daily maintenance and cleaning

Daily maintenance

When storing or placing the oscilloscope, do not expose the LCD monitor to direct sunlight

for a long time.

CAUTION

To avoid damaging the oscilloscope or probe, do not place it in mist, liquid or solvent.

Quick Guide

Clean

According to the requirements of operating conditions, check the oscilloscope and probe

frequently. Please clean the outer surface of the instrument according to the following

steps:

Use a lint-free cloth to remove dust from the outside of the oscilloscope and probe. Be

careful not to scratch the smooth display filter.

Clean the oscilloscope with a soft cloth dampened with water. For more thorough cleaning,

use 75% isopropyl alcohol in water.

CAUTION

To avoid damaging the surface of the oscilloscope or probe, do not use any corrosive or chemical

cleaning agents.

Equipment recycling

Production of this equipment requires the extraction and use of natural resources. If this

product is not disposed of properly, some of the substances contained in the device may be

harmful to the environment or human health. To avoid release of harmful substances into

the environment and reduce the use of natural resources, it is recommended that this

product be recycled by appropriate methods to ensure that most materials can be reused

correctly.

Quick Guide

Contents

Copyright Statement.............................................................................................................................2

Technical Support................................................................................................................................. 3

Summary of general safety matters..................................................................................................... 4

General Safety Summary.....................................................................................................................................................4

Safety terms and symbols................................................................................................................................................... 5

Ventilation requirements.................................................................................................................................................... 6

Working environment......................................................................................................................................................... 6

Daily maintenance and cleaning......................................................................................................................................... 6

Equipment recycling............................................................................................................................................................ 7

Contents............................................................................................................................................... 8

Introduction........................................................................................................................................10

Chapter 1 Quick Start......................................................................................................................... 11

1. Check before use............................................................................................................................................................11

1.1 Check the shipping package.................................................................................................................................... 11

1.2 Check the whole machine....................................................................................................................................... 11

1.3 Check the accessories..............................................................................................................................................11

2. Front Panel Introduction............................................................................................................................................... 11

3. Rear Panel Introduction.................................................................................................................................................13

Chapter 2 Getting Started...................................................................................................................14

1. Check the AC voltage range...........................................................................................................................................14

2. Check the fuse................................................................................................................................................................14

Chapter 3 Function Introduction........................................................................................................ 14

1. Output voltage and current...........................................................................................................................................14

2. Series output..................................................................................................................................................................15

3. Parallel output............................................................................................................................................................... 16

4. Remote control.............................................................................................................................................................. 17

4.1 USB remote control................................................................................................................................................. 17

Quick Guide

4.2 LAN remote control................................................................................................................................................. 18

4.3 RS232/485 remote control...................................................................................................................................... 21

4.4 GPIB remote control................................................................................................................................................ 22

5. Utilities........................................................................................................................................................................... 23

5.1 Store/recall.............................................................................................................................................................. 23

5.2 Setup........................................................................................................................................................................24

5.3 Error message.......................................................................................................................................................... 24

5.4 Capture.................................................................................................................................................................... 24

6. Lock/Unlock................................................................................................................................................................... 25

Chapter 4 Troubleshooting.................................................................................................................26

Chapter 5 Performance Index.............................................................................................................27

Quick Guide

Introduction

HDP43XX/44XX is a programmable DC power supply. It has a user-friendly interface

design, excellent performance indicators, a variety of communication interfaces to meet the

different needs of users, and a variety of analysis functions to meet the diverse needs of

users.

Main Feature:

4.3-inch TFT display

Series and parallel output

High performance: accuracy, transient response and linear adjustment rate

Built-in Chinese and English help system

Digital IO interface, support trigger input/output function

Support SCPI programmable command control

Waveform display function, real-time dynamic display of output voltage/current

waveform, with the digital display of voltage, current and power values, so that users

can see the output status and trend of the instrument at a glance

OV/OC/OT protection function

Keyboard lock function to prevent misoperation

Voltage tracking function

Delay switch function

One-key restore preset state function

Support store and recall

A variety of interface configurations to meet the needs of users

Support U disk storage

Quick Guide

Chapter 1 Quick Start

Taking the three-channel power supply as an example, this chapter will briefly describe and

introduce the front panel, rear panel, user interface, help system, and precautions when

using the instrument for the first time. In this way, users can become familiar with this series

of power supplies in the shortest possible time.

1. Check before use

1.1 Check the shipping package

If you find that the packaging carton or foam protection pad is severely damaged, please

keep it until the whole machine and accessories pass the electrical and mechanical tests.

1.2 Check the whole machine

If you find that the appearance of the instrument is damaged, the instrument is not working

properly, or the performance test fails, please contact the dealer responsible for this

business.

1.3 Check the accessories

Please check the accessories according to the product packing list. If you find the

accessories are missing or damaged, please contact the dealer responsible for this

business.

2. Front Panel Introduction

Quick Guide

1. LCD Display screen

2. Restore default settings

3. Help

Used to quickly get relevant help on the use of the instrument.

4. USB Host

Used for firmware upgrade or external file saving.

5. Auxiliary function soft keys

Operate according to the screen display.

6. Channel Button

Press to select the current channel. Then you can directly set the voltage and current of the

current channel.

7. Power button

8. Common ground terminal

9. Output terminal

10. Output control keys

Turn the output on or off.

11. ALL ON/OFF key

Turn on all or turn off all output channels.

12. Voltage/current adjustment knob

Finely adjust the voltage/current, and the adjustment accuracy is 1mV/1mA.

13. Arrow keys

Use the arrow keys to move the cursor position up, down, left, and right.

14. Numeric keypad

Enter the value directly, press the "Enter" key to confirm, and press the "×" key to delete.

15. Function keys

Meter View: Display the Meter View of the selected channel.

Tracking: Turn on or off the tracking mode of channel 1 and channel 2.

Store/Recall: Open the store/recall menu.

Quick Guide

3. Rear Panel Introduction

1. Digital IO interface

2. USB interface

3. LAN interface

4. AC selector

5. Power jack

6. Fuse holder

7. Exhaust fan

8. Ground reference point

9. Safety lock

10. GPIB interface

11. RS-232/485 interface

Quick Guide

Chapter 2 Getting Started

1. Check the AC voltage range

This series of programmable DC power supplies support various specifications of AC

power input, and users can choose the appropriate input gear according to actual needs.

The user must check the gear position of the AC voltage selector on the rear panel of the

power supply before using it, and the input voltage must be within the allowable range

(±10%) of the gear position. The corresponding relationship between the voltage selector

on the rear panel of the power supply and the allowable input voltage is as follows:

2. Check the fuse

The instrument has been installed with the specified fuse at the factory. Before use, please

check whether the fuse type matches the AC voltage range. If it does not match or the fuse

is blown, replace the fuse according to the specifications.

Steps to replace the fuse:

1. Turn off the power and unplug the power cord;

2. Lift out the fuse holder;

3. Remove the broken fuse and install a new one;

4. Put the fuse holder back into the slot.

Chapter 3 Function Introduction

1. Output voltage and current

The output voltage and current can be directly input in the main interface, or set in "Source

Settings" and "Meter View".

Quick Guide

Setting steps:

1. Select the output channel

Press the digital channel button on the front panel, or continuously press the left "◁" and

right "▷" arrows to select the output channel to be set.

2. Set voltage/current:

Press the arrow keys to select voltage or current, use the numeric keyboard or knob to set

the value, press "×" to delete, and press "Enter" to confirm and exit editing.

3. Turn on the output

Press the "On/Off" key to turn on the output.

2. Series output

Press Output Settings->Operation Mode to select Series, which can be set as serial output.

In series mode, the channels are internally connected in series to form a single output. The

channel 2 window of the main interface displays "SERIES with CH1". Channel 1 is the

master and channel 2 is the slave. The "+" terminal of channel 1 and the "-" terminal of

channel 2 are the two output terminals of the series circuit. The output voltage is twice the

set voltage of channel 1, and the output current is the set current of channel 1. The external

wiring method of series mode is as follows:

Quick Guide

3. Parallel output

Press Output Settings->Operation Mode to select Parallel, which can be set as parallel

output.

In parallel mode, the channels are internally connected in parallel to form a single output.

The channel 2 window of the main interface displays "PARALLEL with CH1". Channel 1 is

the master and channel 2 is the slave. The "+" and "-" binding posts of channel 1 are the

two output terminals of the parallel circuit. The output current is twice the set current of

channel 1, and the output voltage is the set voltage of channel 1. The external wiring

method of parallel mode is as follows:

Quick Guide

4. Remote control

4.1 USB remote control

Use the USB cable to connect the USB port on the back of the computer to the USB port on

the rear panel of the power supply. At this time, the USB connected logo is displayed on the

upper right corner of the main interface of the power supply.

Download and install the IO software from the following address:

https://www.keysight.com/main/software.jspx?id=2175637&nid=-11143.0.00&pageMode=

CV&lc=eng&cc=CA

Open the IO software, find the device, and send an instruction to see if the communication

is normal. After normal communication is obtained, SCPI commands can be used to control

the power output.

E.g:

OUTP On, (@1) Set the channel 1 output on.

Volt 5, (@1) Set the voltage of channel 1 to 5V.

Meas:volt? (@1) View the output voltage value of channel 1.

Quick Guide

4.2 LAN remote control

Connect the back-end network port of the computer to the network port on the rear panel of

the power supply with a LAN network cable.

Utility→I/O Config→LAN Settings to set the power supply LAN parameter.

Press Load menu to load settings, as shown in the figure below:

Please configuration of computer IP and other information manually. Set computer Ethernet

properties:

Quick Guide

After the connection is successful, open the IO software and the device will appear in the

LAN list. If the device does not appear, you can manually add the device, enter the device's

IP address and protocol, test the VISA address, and click OK to add a new device.

Quick Guide

After a successful connection, the network port icon in the upper right corner of the main

interface is displayed as follows:

As with USB remote control, after obtaining normal communication, you can use SCPI

commands to control the power output.

If there is a DHCP server in the LAN, you can open the DHCP function, and the instrument

will automatically obtain IP and other information from the DHCP server without manual

setup.

Page is loading ...

Hantek HDP User guide

Brand: Hantek

Model: HDP

Type: User guide

Download PDF

report

Hantek HDP User guide

Hantek HDP User guide

Related papers

Other documents