2. ROOMS TO GO
  3. 42861167

ROOMS TO GO 42861167 Assembly Instructions

  • Hello, I've reviewed the assembly instructions for the 6116 Server. The document includes a detailed hardware list, parts list, and step-by-step instructions for assembly. It emphasizes the need for two people during assembly and includes instructions for installing anti-tip hardware. I am ready to answer your questions about the assembly process and the product.
  • How many people are recommended for the assembly?
    What should I avoid doing when tightening bolts?
    What should I do before starting assembly?
Assembly Instructions
PHOM 6116 SERVER
SKU# 42861167
This product is manufactured by PHOM for Rooms To Go
Hardware Pack Location(s):
SERVER SKU# 42861167
QtyComponent
Step
Code
Parts List: Hardware List:
1
1Allen Wrench M4
X
55mm
A. Main Compartment 1Pc
Page 1 of 3
1 Pc
2
JCBC Bolt With Washer
516
"
X
18T
X
2" 8 Pcs
8 Pcs
8 Pcs
Spring Washer
116
"
X
13mm
Flat Washer
116
"
X
18mm
Version# - 230508-1
B. Leg 4Pcs
1. We recommend that you should assemble this product with the
assistance of another person, this will make assembly easier and will
eliminate damage to the product or injury to person during assembly.
2. Please do not over tighten bolts until assembly in complete.
3. Please put all parts on a non-abrasive floor before assembly,
and follow assembly steps to assemble your newly purchased
product correctly and efficiently.
Protective surface
STEP 1
：
Turn the Server to upright position carefully. Assembly completed.
Attach Leg to Main Compartment, with JCBC Bolt and Washers using Allen Wrench.
Assembly Instructions
PHOM 6116 SERVER
SKU# 42861167
This product is manufactured by PHOM for Rooms To Go
Page 2 of 3Version# - 230508-1
STEP 2
：
A
B
1
2
***Cautions:
Please read all instructions carefully before starting the assembly. These parts are
cumbersome and heavy. Therefore two people are recommended in order to prevent personal injury
and insure the parts are not damaged during the assembly. Do not fully tighten the bolts initially until
all the bolts are in place. To avoid causing damages to the thread, do not over tighten the bolts.
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may have come loose inside the carton during shipment.
Assembly Instructions
PHOM 6116 SERVER
SKU# 42861167
This product is manufactured by PHOM for Rooms To Go
Page 3 of 3Version# - 230508-1
ANTI-TIP HARDWARE
QtyComponentCode
Hardware List:
1Chipwood Screw
#10
X
58
"1 Pc
21 Pc
4 Cable Tie 1 Pc
3 L Bracket 2 Pcs
WALL
STEP 1
：
STEP 3
：
STEP 2
：
WALL
1
2
Chipwood Screw
#10
X 2
"
/