2. C.E. Niehoff
  3. 100 Series: Regulator Cover

C.E. Niehoff 100 Series: Regulator Cover Template

  • Hello! I've reviewed the Template Instructions for the 100 Series Voltage Regulator Cover Template. This document explains how to create a precise paper template for use in upgrading your alternator's voltage regulator. I understand the instructions for cutting, punching, and drilling the template and how it is used during installation. I'm ready to answer your questions about this document or the template.
  • What is the purpose of this document?
    Where should the template be placed?
    What size hole should be drilled?
1. Cut around dotted line to make template.
2. Center punch hole.
3. Drill 9/16"
hole here.
II5D
Installation Instructions (for U.K. only)
100 Series Alternators
Voltage Regulator Cover Template
Page 1 of 1
CHARGING AND POWER MANAGEMENT SOLUTIONS
C. E. Niehoff & Co. • 2021 Lee Street • Evanston, IL 60202 Tech Services Hotline 800-643-4633
Template Instructions
Follow these instructions to create a template for use with Installation Instructions
II4, “100 Series Alternators Voltage Regulator Upgrade.”
If you have questions about your alternator or these instructions, or if you need to locate a Factory Authorized Service Distributor, please contact us at:
C. E. Nieho & Co.• 2021 Lee Street • Evanston, IL 60202 USA
TEL: 800.643.4633 USA and Canada • TEL: 847.866.6030 outside USA and Canada • FAX: 847.492.1242
E-mail us at service@CENieho.com
Place template on INSIDE
of voltage regulator cover.
NOTICE
/