G-Homa G-Homa 2AUDF-CQ12X Smart PTZ Battery Camera User manual

Type
User manual
Smart PTZ Battery Camera
Operation Instruction
FCC ID: 2AUDF-CQ12X
Contents
1.Packing list---------------------------------------01
2.Product appearance---------------------------02
3.Quick start---------------------------------------04
4.Set up the camra--------------------------------06
5.Install the camera---------------------------------11
6.Share the camera---------------------------------14
7.Charge the camera------------------------------17
8.Indicator light status--------------------------18
9.Product specification------------------------18
10.Firmware upgrade-------------------------19
11.FCC warning-----------------------------------19
12.FAQ-------------------------------------------21
Packing list
01
1. Camera*1
2. Bracket*1
3. Mounting kit*1
4. USB charging cable *1
5. Operation instruction*1
6. Screw for bracket*1
02
Product appearance
Infrared lamp Lens
Indicator light
Human body
infrared sensor
MIC
Wi-Fi antenna
White light
03
Micro-SD card slot
Power button
Micro-USB port
Reboot hole
Speaker
04
Quick start
The smart battery camera supports battery-powered supply
and AC-powered supply.
1. Download and install the App
The wireless smart battery camera supports Android and
iOS App. For your best experience, please scan the QR code
below with your mobile phone, install the app, and follow
the instruction to complete the user registration.
Download App
Android
Download
Download
App Store
Scan QR code or go to the link to download and install the
App:https://www.vicohome.io/download/
05
2. Add the device
Sign in to the App connect to Wi-Fi and add the device
according to the prompts (please bring the device close
to the router when con󼴩guring).
06
Set up the camera
Click the "Add Camera Now" in the App and enter the Wi-Fi
network name and password that you want the camera to
connect.
07
To ensure a longer distance connection, the camera only
supports the 2.4Ghz Wi-Fi with stronger wall penetration
capability and does not support Wi-Fi for enterprise¬level
authentication currently. Please ensure that the entered Wi-Fi
meets the requirements. After completion, click "Continue"
to generate the QR code for pairing the camera.
2) After pressing the camera switch for 3 seconds, the camera
will turn on. The camera will emit the scanning sound "Ding
Dong Ding Dong" after it is turned on (if you do not hear it,
please double click the power button).
Power button
about 7 inches (20cm)
08
3) Take the lens of the camera facing the QR code generated
on VicoHome about 20 cm (7 inches) until you hear a "Ding"
sound.
09
4) After a while, the camera will give out a prompt sound of a
successful connection. At this moment, please set the name
for the device on the App and select the location you want to
place the device. Click "Continue" to complete the pairing.
10
Possible problems with binding:
When you hear the "Wi-Fi Password Error", please check
whether the Wi-Fi password you entered in the App is
correct;
When you hear the "Authentication error", please ensure
that your Wi-Fi network is not an enterprise-level network,
and the device supports only the network with the security
level below WPA-2;
When you hear the "Wi-Fi not found", please check
whether you select or enter the correct Wi-Fi name, and
place the device near the Wi-Fi router and ensure that the
router is powered on. Please note that 5Ghz Wi-Fi cannot
be searched by the device;
When you hear the "Retrieving IP timeout", it indicates
that the number of devices connected to the router in your
home is too many to connect more devices. Please remove
some of the connected devices that are not commonly
used or restart the router to clear the unconnected
devices. You may need to contact the router administrator;
When you hear the "Cloud service connection fail",
please check whether your router is connected properly to
the external network. When you hear this error prompt,it
is common on the condition of network disconnection
or that the selected router in your home is a local area
network server. Please ensure that the network connection
is normal, and try to temporarily turn off the firewall to
connect again.
11
Install the camera
You can place the camera on a shelf or other surfaces to use,
or you can install it on a wall to use.
(1) Select a good spot for your camera
Select a good spot for your camera, please install the camera
in a position where its view is not blocked and ensure that it
is within the coverage of the Wi-Fi network. The PIR infrared
sensor is more sensitive to movements across the camera's
field of view than movements toward or away from the
camera.
12
(2) Install the bracket
1) Screw 󼴩xing:
Fix the camera to the desired location. You can directly place
the camera on a 󼴪at surface or 󼴩x the bracket to the wall or
ceiling by screws.
height About 6 ft
ommended Rec
For outdoor use, please install the camera upside down
to maximize the waterproof performance and the human
body infrared sensor’s e󼴨ectivity.
13
Put the camera up side down and then 󼴩x the camera to the
bracket by a screw .
2) Fix the camera
14
When you want to let other family members or friends view
the camera, you can use this feature. Only the admin user
who is the 󼴩rst to add the camera is able to share the camera
and manage the settings for the camera. The shared users
have limited access rights.
Share the camera
(1) Steps for Admin User
1) Find the camera you want to share on the App Homepage ,
then tap the "Share" button. You can also tap the camera
"Camera Setting" icon, then tap the "Share" button;
15
2) Tap "Camera sharing", a QR code for sharing will be
generated.
16
(2) Steps for Shared User
For the family members or friends you want to share, find
"Add friend's camera" on the Homepage to enter the scan
code page, then scan QR code generared on the admin's
phone, then send the access request to the admin user.
17
Charge the camera
The App will remind you to charge your camera when the
battery is low. Please use the Micro USB cable to plug into
the 5V/1.5A charging adapter to charge the camera. During
charging, the camera's indicator light is solid yellow, and
when the camera is fully charged, the indicator light will
turn into solid green. It will take 15 hours to fully charge the
camera.
(3) Steps for Admin User
You will receive a con󼴩rmation notice, and you can complete
sharing after agreeing.
18
Indicator light status
Mode Status
Working mode Blue
Sleep mode O󼴨
Charging mode Yellow
Fully charged mode Green
Product speci󼴩cation
Item Speci󼴩cation
Camera lens Field of view: 110°
Image resolution Max. 1920 X 1080
Video bit rate Adaptive
Storage media Micro SD card (Up to 128GB)
Rotation Angle 355° pan, 90° tilt
Battery capacity 9000mAh
Adapter requirement 5V/1.5A
Size(without bracket) 120.2×101.1×158.3(mm)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25

G-Homa G-Homa 2AUDF-CQ12X Smart PTZ Battery Camera User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI