2. SMITH SYSTEM
  3. 03095

SMITH SYSTEM 03095, 03097 Assembly Instructions

  • I've reviewed the Installation Instructions for the Smith System Interchange Wing Desk models 03095 and 03097. This document provides detailed steps for assembling the desk, including attaching the legs and using the provided hardware. I'm here to answer your questions about the installation process and the desk's features.
  • What should I do if I have missing or damaged parts?
    What tool is needed to tighten the connector bolt?
    How many legs are needed for desk?
For Assistance in assembling product, missing or damaged parts, or to place an order, please contact
customer service at 800-328-1061.
You may also place your order online at
Form #179979 www.smithsystem.com 06/2018
Interchange Wing Desk
Installation Instructions
Model Numbers
03095
03097 (swoop)
1. Align this Center Support with the pre-drills on the top.
2. Position the other two legs as shown below and align them with the predrills.
3. Secure the three legs together loosely with the connector bolt provided.
4. Fasten the frame assembly to the top using the
screws provided. Finally, tighten the connector
bolt using the allen key (hex key) provided.
For Assistance in assembling product, missing or damaged parts, or to place an order, please contact
customer service at 800-328-1061.
You may also place your order online at
Form #179979 www.smithsystem.com 06/2018
Leg Set P/N: 79527
/