User manual
WWW.LIVOO.FR
Reference : TES220
Version : 1.4
Language : English
Bluetooth® compatible
speaker
User manual
1
Thank you to have purchased a product brand LIVOO. We take great care in design, ergonomics and
simple use of our products. We hope that this product will give you complete satisfaction.
This manual is also available on www.livoo.fr
GENERAL INSTRUCTIONS
PLEASE, TAKE TIME TO READ WELL THE INSTRUCTIONS FOR USE PARTICULARLY BEFORE THE FIRST USE.
A misuse of the appliance can damage it or hurt the user. Assure that you use the appliance for the use for
which it is designed; we refuse any responsibilities as for the damages by an incorrect use or a bad
manipulation.
• Before using the unit please read the manual carefully.
• Keep this product away from any water, liquid or wet areas.
• This product shall not be exposed to dripping or splashing and that no objects filled with liquids, such
as vases, shall be placed on the apparatus.
• Use in dry locations only.
• Keep this product away from naked flames such as candles.
• This product should be only operated from the type of power source indicated on the marking label.
• Do not place the product in direct sunlight or heat. Keep away from temperatures over 40°C.
• Make sure the product has plenty of ventilation.
• Do not press the buttons too hard as it could damage the product.
• Do not use a wet cloth on the product. Always use a dry cloth to clean this product and keep it free
from dust.
• Do not use chemicals on this product.
• Never try to repair this product yourself, take it to an approved technician. Trying to remove panels
or repairing the unit yourself could lead to electric shock.
• When the unit is not in use, make sure it is correctly turned off and stored in a cool dry place.
• Do not insert foreign objects into the product.
• Adult Supervision is recommended with children using this product.
• Avoid dropping or standing on the product, as harsh impacts could damage the product.
Package Contents:
1x Bluetooth® speaker
1x Micro USB charging cable
1x AUX in cable
1 x user manual
User manual
2
LOCATION OF CONTROLS
User manual
3
1. Built-in microphone
2. Operating mode indicator
Blue : Bluetooth® mode
Pink : TF card mode
Green : Aux-in mode
Red : power off mode
3. Button
- Press and hold to power on/off
-Short press this button once to play/pause current playback.
-Short press twice continuously to skip to next track
-Short press thrice continuously to skip previous track during Bluetooth®/TF card playback mode
4. Touch volume key
-Slide your finger in a clockwise/anti-clockwise direction to increase or decrease the volume level.
5. TWS / PAIR button
-Short press this button to TWS pair 2 speakers before they connect to a Bluetooth® device, a voice prompt
“ TWS paired” if pairing has been carried out successfully.
-Short press it again to break the current TWS connection, a voice prompt “TWS disconnected”.
In Bluetooth® mode : press and hold this button for 3 seconds to break the current Bluetooth® connection
and initiate pairing.
6. MODE button
Press to change the different modes when a TF card is inserted or 3.5mm Aux-in cable plugged.
7. TF card slot
8. Aux-in Jack
9. Battery charging indicator
• Red = charging
• Green = full charged
10. DC 5V charging jack
OPERATIONS
BATTERY CHARGING INSTRUCTIONS
This unit operates on a built-in Li-ion battery that can be recharged by an USB power adaptor (not
included) with a rated output of DC 5V/1A and up.
CHARGING THE BATTERY FOR FIRST TIME
1.) Charge the built-in Li-ion battery a minimum of 3 hours prior to first use.
2.) The battery charging indicator lights red while charging and lights green when the unit is fully charged.
Unplug the USB cable from the speaker once the battery is fully charged.
TURN THE SPEAKER POWER ON/OFF
1. Press and hold the button on the top of the unit, a voice prompt “Power on” is heard. Meanwhile,
the operating mode indicator will flash in blue.
2. Press and hold the button again, a voice prompt “Power off” reminds that the speaker is powered off.
User manual
4
-Note: During power on, when the speaker is sitting idle and not any input signals are being received for
about 15 minutes, it will automatically power off.
TWS PAIRING FOR TWO UNITS
If you bought 2pcs of TES220, these two units can be paired wirelessly.
1. Turn on both units of the TES220, make sure both units haven't been connected to other source devices
via Bluetooth
2. Press the TWS button on either of these two units to pair with another unit, a beep sound will be heard,
when pairing has been carried out successfully, a voice prompt “TWS paired” will be heard, meanwhile,
the blue circle light of the connected unit stops flashing.
Now these two units can be played and controlled synchronously during the Bluetooth playback mode.
3. Press it again to break the current TWS connection, a voice prompt “TWS disconnected” will be heard.
OPERATING THE SPEAKER IN BLUETOOTH MODE
Pair the Speaker manually
If the speaker has never been paired with a Bluetooth device before, you need to follow the pairing
instructions below to link the speaker with your Bluetooth device.
1. When the speaker turned on, a voice “Bluetooth mode” will be heard and the operating mode indicator
flashes in blue. The speaker is ready to pair with your Bluetooth device.
2. Activate Bluetooth on the compatible device, and set it to search for compatible devices.
3. Select the speaker name: “TES220” from the list of found devices.
Tips: Only one playback unit can be connected to the speaker. If the speaker is already connected to
another playback unit, the speaker will not appear in the BT selection list.
4. If your device asks for a passkey (depending on the device manufacturers, model, and software version),
then enter digits “0000” (four zeros) and press OK.
If pairing has been carried out successfully, a voice prompt “device paired” is heard, meanwhile, the blue
circle light stops flashing.
If the speaker has ever been paired with a Bluetooth device before. You need to follow the pairing
instructions below to link the speaker with your Bluetooth device.
1. After turning on the speaker, the speaker will search for the last paired device. The operating mode
indicator will flash in blue. If the unit finds the last paired Bluetooth device, a voice prompt “device
paired” is heard and operating mode indicator will keep in blue and stop flashing.
2. After successfully pairing, you can begin playing music from your Bluetooth device wirelessly to the
speaker.
USING THE SPEAKER AS A HAND FREE BLUETOOTH® SPEAKERPHONE
1. Link your cell phone to the speaker via Bluetooth as described above.
2. When receiving an incoming call on your cell phone, tap button on the speaker to switch the incoming
call from cell phone to the speaker. Complete your call using the built-in microphone and speaker.
User manual
5
3. Adjust the volume control of your cell phone to obtain the desired sound level.
4. To end the call, just tap the button again, the call will end. If you were playing music from your cell
phone to the speaker before answering the call, the music will automatically resume playing when you
hang up.
5. To ignore an incoming call, simply press and hold the button on the speaker for about 2 seconds, the
call will be ignored.
OPERATING THE SPEAKER IN TF-CARD MODE
Insert the TF card carefully to the speaker to access TF card mode, the operating mode indicator will be
changed to Pink color. The TF card will start playing automatically in few seconds.
Press button to pause or resume playback.
Use the volume controller on the top of the speaker to adjust to the desired volume level.
Press button twice to skip to next track and press button thrice to skip to previous track.
OPERATING THE SPEAKER IN AUX-IN MODE
1. Plug one end of the 3.5mm audio cable into the headphone or line out jack on your player, plug the
other end of cable into the unit AUX-IN jack of the speaker.
2. Turn on the external audio source and play your device.
3. Press and hold button to turn on the unit, the operating mode indicator will light in Green.
4. The volume level can now be controlled through the main unit. Operate all other functions on the
external device as usual.
Note:
During AUX mode, if you plug TF card into the unit, the play mode will automatically change to TF Card
playback mode.
Troubleshooting Guide
Should you experience difficulties in the use of this player, please refer to the following chart.
Fault Cause Solution
Speaker can’t be powered on
The battery level is too low
Recharge the battery
No charging
The USB power adapter is not plugged into a
wall outlet
Plug the USB power adapter
into a wall outlet
No Sound
The battery level is too low
Recharge the battery
Volume set too low
Increase the volume
Speaker is not paired to the audio source
Check whether a connection
exists. If necessary, pair the
User manual
6
Specifications
Battery capacity : 2000mAh, 3,7V
Power consumption : 5W
Max Play time : 4 hours
Fully charge time : 3 hours
Bluetooth® support : V4.2
Reception range : 10 meters
Working temperature : 0℃~+ 35℃
Working humidity : 20%~80%
No audio signal via the Bluetooth®
connection
Volume too low Increase the volume on the
speaker or on the audio source
Speaker can’t be connected
Pairing does not work
Check whether the audio source
supports the A2DP protocol
Audio source is switched off
Switch on the audio source
Bluetooth® is switched off at
the audio source
Switch the Bluetooth® function
in the audio source
Bluetooth® version is not supported
Use a different playback unit
Poor sound quality from a
Bluetooth® device
Bluetooth® device is almost out of range
of the TES220
Move your Bluetooth® device
closer to the TES220
2pcs speakers of TES220 can’t
be TWS paired One of these speakers has already
connected to a Bluetooth® source
device
Disable the Bluetooth® connection
with the source device, and then
short press the TWS button on either
of these two speakers
User manual
7
EU DECLARATION OF CONFORMITY
We
DELTA
BP61071
67452 Mundolsheim – France
Herewith declare under our sole responsibility, that the radio equipment
Bluetooth® compatible speaker
TES220 (Frequency range 2402MHz-2480MHz)
Fulfils the essential requirements of the Directive 2014/53/UE
The following standards were applied:
Radio:
EN 300 328 V2.1.1 (2016-11)
EMC:
DRAFT ETSI EN 301 489-1 V 2.2.0 (2017-03)
DRAFT ETSI EN 301 489-17 V 3.2.0 (2017-03)
Health and Safety:
EN60065:2014
EN 62479: 2010
Mundolsheim, 25/04/2019
User manual
8
Correct Disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
The European Directive 2012/19/EU on Waste Facilities Electrical and Electronic (WEEE)
This marking shown on the product or its literature, indicates that it should not be disposed with other household
wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product or their local authority office, for details of
where and how they can take this item for environmentally safe recycling
.
• Photo no contractual
• Worried about the quality of his products the manufacturer reserves the right to make modifications without advance
notice
LIVOO
BP 61071
67452 Mundolsheim - FRANCE
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
Livoo TES220B User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Blaupunkt COBPS20WL1 User manual
-
moonki MO-R88BT User manual
-
-
Seiki S20WL1 User manual
-
Kmart 43190454 User manual
-
Kogan KASPIPX7BKA User guide
-
moonki MO-L2077BT Wireless Speaker User manual
-
KINGTA H2-6067V1S User manual
-
Kmart 43233861 User manual
-
Takstar WPM-400 User manual