K-Rain TC-KR, TC-KR-BSP Installation guide

  • Hello! I'm your chat assistant, and I've reviewed the Quick Installation Guide for the K-Rain TC-KR and TC-KR-BSP Tap Timers. The document describes how to get started with your new tap timer using a Bluetooth connection and mobile app. I'm ready to answer any questions you may have about the setup or operation of these devices.
  • How do I control the timer?
    What type of battery does the timer use?
    How do I connect my device?
TC-KR
Battery Powered Tap Timer
Models:
TC-KR
TC-KR-BSP
QUICK INSTALLATION GUIDE
1640 Australian Avenue | Riviera Beach, FL 33404 USA
561.844.1002 | FAX: 561.842.9493 | 1.800.735.7246
www.krain.com
© K-Rain Manufacturing Corp. AN ISO 9001 CERTIFIED COMPANY
INTRODUCTION
TC-KR is a Bluetooth® and fully waterproof battery operated tap timer.
Easily add irrigation or misting to small lawn or garden areas, terraces
and potted plants using your hose faucet. A simple to use Bluetooth®
app controls your irrigation needs through your smartphone or tablet.
STEP 1: APP DOWNLOAD
1. On your smartphone or tablet, go to the itunes App Store
or to the Goggle Play Store app.
2. Search for the K-Rain BL app in the search bar.
3. Download and install the K-Rain BL app.
4. Make sure Bluetooth® is enabled on your smartphone or tablet.
STEP 2: PAIRING
1. Unit requires one 9V alkaline battery
prior to operating. Remove the blue
(or green) plastic shield and rubber
gasket, install the battery, and replace
the plastic shield and rubber gasket.
2. Launch the K-Rain BL app.
3. Tap on the «Add a module» button,
or on the «+» button.
5. Choose your TC-KR from the list of
nearby controllers.
6. Follow the in-app instructions. Once
your TC-KR controller has connected
to your phone or tablet, it will show as
“connected.” Tap on controller icon
to access the main programing page.
/