Ancona AN-4119 User manual

Type
User manual

Ancona AN-4119 is an Aria Single Handle Pull-out Kitchen Faucet equipped with a variety of features to enhance your kitchen experience. This faucet meets the highest standards, including ASME A112.18.1/CSA B125.1, ASME A112.18.2/CSA B125.2, and is LISTED IAPMO/cUPC for your safety and peace of mind. The pull-out design allows for easy cleaning and filling of pots and pans, while the single handle design provides effortless control of water temperature and flow rate. The Ancona AN-4119 is a perfect addition to any modern kitchen, offering both style and functionality.

Ancona AN-4119 is an Aria Single Handle Pull-out Kitchen Faucet equipped with a variety of features to enhance your kitchen experience. This faucet meets the highest standards, including ASME A112.18.1/CSA B125.1, ASME A112.18.2/CSA B125.2, and is LISTED IAPMO/cUPC for your safety and peace of mind. The pull-out design allows for easy cleaning and filling of pots and pans, while the single handle design provides effortless control of water temperature and flow rate. The Ancona AN-4119 is a perfect addition to any modern kitchen, offering both style and functionality.

© ®
P S I
G P M
0
10
20
30
40
50 60
70
80
0
1
5
1
1 5
2
Single Handle Pull-out Kitchen Faucet
STANDARDS
ASME A112.18.1/CSA B125.1
ASME A112.18.2/CSA B125.2
LISTED IAPMO/cUPC
-
-
-
Gather the necessary tools as shown below to complete the installation of this
faucet. Some may not be needed depending on the model of faucet you are
installing. Check with your local hardware store on the requirements of your
installation situation.
Tools:
PLUMBERS PUTTY
FLASHLIGHT
BASIN WRENCH
SAFETY GLASSES SCREWDRIVER
PLIERS
CHANNELLOCKS ADJUSTABLE WRENCH
HEX-KEY TAPE
For easy installation, you will need:
- To read all the installation instructions completely before beginning.
- To read all the warning, attention and maintenance information.
- To purchase the proper supply lines.
Tighten connection with two wrench to prevent
damage to tube body. Be careful not to bend
the stem as this will void the product warranty.
Attention:
Helpful Information
Flow Rate Chart
Important
Aria
2017-12-11 MAAN4118-1
SEALED-TUBE
WARNING:
Please keep the tools for future use!
Faucet Installation
1
Position the faucet in order on the
counter top as shown. Don't forget the
O-ring. Assemble gasket assembly
and lock nut to faucet threaded sleeve
by hand and tighten the screws with
screwdriver.
2
Connect the shower hose to quick
connect. CAUTION: MAKE SURE THE
HOSE IS PROPERLY ENGAGED AND
SECURED IN THE QUICK CONNECT.
Disassemble the weight and put it on
the shower hose. Then fix screws with
screwdriver.
Tools might be applied to the following places:
1
8
3
/
8
” (4
66.4
mm)
3 1/2"
(89.1 mm)
7
3
/
16
” (
182.1
mm)
3
7
/
16
(
87.1
mm)
8 7/8"
(226 mm)
10 9
/
16
(
267.8
mm)
1 1/2"
(38 mm) max.
1/
2-14NPSM
1 3/8" -1 1/2"
(35-38 mm)
1 3/4"
(45 mm)
Installation size map
4 9/16" (116.1 mm)
10 11/16" (270.8 mm)
A. Move handle into "OFF" position.
B. Turn on water supplies. Check connections for leaks.
C. Remove hand shower and let both hot and cold water
run for one minute. This will help clean any debris that
might otherwise clog the system. Replace hand shower.
D. Operate handle up and down, in cold and hot positions,
to flush water lines thoroughly.
Checking and Testing
Test Faucet Installation
Simply rinse the surface with clear water or
mild liquid detergents
if necessary Dry the
faucet with a clean soft cotton cloth
Do not
use any cleaning agents containing
acids
polish abrasives or harsh cleaners
Maintenance:
3
A. B. C.
Connect to water supply lines with either
A 3 8 O D copper tubing ball nose
risers with the coupling nuts or
B 3 8 copper tubing no ball with
supplied tube head interior connector or
C IPS faucet connectors 1 2
4
Remove the shower by hand. Turn the
faucet handle all the way on, turn on hot
and cold water supply and flush water
lines for one minute. Reinstall shower
by hand.
5
Check all connections at arrows for
leaks and retighten if necessary. BUT
DON'T OVERTIGHTEN
1. Clean it with water and dry it with soft cloth.
2. Clean the product with gentle liquid or glass cleaner.
3. Don't use acid cleaner.
4. Don't clean with abrasive material, abrasive paper or knife.
Parts listCleaning and care
Daily cleaning and care are required in order to keep the product shining and working properly.
NO. PART NAME
Shower1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Check valve
Shower hose
Shower sleeve
Spout
Ring
O-ring
Connector
Retainer
O-ring
Body
Cartridge
Cartridge lock nut
Trim cap
Handle
Screw
Index
Threaded shank
Copper tube(hot water)
Copper tube
Copper tube(cold water)
Quick connect
Base
O-ring
Gasket assembly
Lock nut
Screw
Weight
Allen key
Flexible hose
Face plate
Washer
5
6
7
4
1
3
2
8
9
10
11
12
13
14
15
16
17
23
24
25
27
26
20
21
22
18
19
29
28
30
31
32
31
32
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Ancona AN-4119 User manual

Type
User manual

Ancona AN-4119 is an Aria Single Handle Pull-out Kitchen Faucet equipped with a variety of features to enhance your kitchen experience. This faucet meets the highest standards, including ASME A112.18.1/CSA B125.1, ASME A112.18.2/CSA B125.2, and is LISTED IAPMO/cUPC for your safety and peace of mind. The pull-out design allows for easy cleaning and filling of pots and pans, while the single handle design provides effortless control of water temperature and flow rate. The Ancona AN-4119 is a perfect addition to any modern kitchen, offering both style and functionality.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI