11
Preparation
Charging
• Turn the appliance off.
• Wipe off any water droplets on the appliance socket and the
charging stand.
1
Connect the appliance plug to the
Plug in the adaptor into a
• Check that the charge
status
lamp ( )
glows.
• Charging is completed after approx.
1 hour.
2
3
While charging After charging is completed
The charge status lamp ( )
glows.
The battery capacity lamp will
blink in order of “LOW”, “MID”,
and “HIGH” while the charging
progresses.
The battery capacity lamp and
the charge
status
lamp ( )
will light up and then turn off
after 5 seconds.
Notes
• If there is noise from the radio or other sources while using or
charging the appliance, move to a different location to use the
appliance.
• The battery will deteriorate if not used for over 6 months, so
make sure to perform a full charge at least once every 6 months.
• The charging time may differ when using the appliance for the
lamp on the appliance may not glow for several minutes when
• Recommended ambient temperature for charging is
10 °C – 35 °C. It may take longer to charge, or the charge status
lamp (
) will blink quickly and the battery may fail to charge
properly in extremely high or low temperatures.
• When the charge status lamp ( ) is blinking rapidly (twice every
second), there is a charging malfunction. Please charge the
battery in the recommended ambient temperature range.
• 1 full charge will provide approximately 60 minutes of continuous
operation. (Based on dry using at 20 °C – 30 °C)
The operating time may differ depending on the frequency of use
and the operating method.
• The battery used is a lithium‑ion, so charging after every use will
have no effect on battery life.
Charging with the charging stand
ER-SB60
1
2
3
1. Insert the appliance plug into the charging
stand.
2.
Place the main body on the charging stand.
3.
Plug in the adaptor into a household outlet.
ER-SB60_40_EU.indb 11 2017/05/25 11:00:21