BATTERY POWERED CAMERA
WIRELESS I WiFi I OUTDOOR I SECURITY
GX1S
Get Smarter about your Security
Warranty Service
Thanks for your shopping and trust.
We will keep optimizing the product quality and enhancing your purchase
experience as much as we can. Zumimall will provide you an excellent
lifetime online service.
If you meet any problems in using our products, please contact with us
Soon by email as below. We will supply a best solution for you
in 24 Hours. Any of your advice will be collected and we'll do our
best to improve.
Register via link below to get 3 Years Warranty Extension.
http://bit.ly/zuReg
Product Service: tech@zumimall.com
distributor@zumimall.comDistributor:
Online Service
Whats App: 86 13480866052
FaceBook: fb.me/Zumimall
1.What’s in the Box....................................................................P1
2.Product Diagram...................................................................P2
3.Download & Install APP........................................................P3
4.Account Registration .............................................................P4
5.Add Camera to APP............................................................P4.5
5.1Preparations for connection....................................................P4
5.2Connect Camera to APP..........................................................P5
6. Camera Installation..............................................................P6
7. Monitoring Area....................................................................P6
8. Important Notes....................................................................P7
9.Device Menu...........................................................................P8
10.Camera Settings..................................................................P9
11.PIR Body Detection….....................................................P9.10
11.1 Body Detection Alarm Setting ..............................................P9
11.2 Alarm Notifications..........................................................P10
11.3 Records Playback & Delete................................................P10
12.Two-Way Audio..................................................................P11
13.Battery Management........................................................P11
14.Multi Device Management...............................................P12
15.Reset...................................................................................P12
16.Trouble Shooting...............................................................P13
INDEX PAGE
1. What’s in the Box:
ZUMIMALL Battery Camera*1 Outdoor Metal Mount*1
Quick User Guide*1 Screws Set*1
USB Cable*1
1
2. Product Diagram:
2
Power Button
Keep Pressing for 5 seconds to power on/power off
Reset Button
Keep pressing for 5 seconds to reset and restart
Blinking slowly in Red
Awaiting Wi-Fi Connection, ready for adding devices
Blinking fast in Red
Wi-Fi Connecting
Red spot
Network Problem
Blue spot
Wi-Fi Connected, camera running normally
Blinking slowly in Blue
AP Mode
Camera Lens
IR
PIR Sensor
Antenna
1
2
3
44
Antenna
Microphone
Reset Button
LED Indicator
5
6
7
8
Speaker
Power button
SD Card Slot
USB Port
9
10
11
1212
7
8
9
11
12
10
1
2
6
3
5
44
3. Download & Install APP:
TM TM
Download CloudEdge APP from Google Play or APP Store .
Or scan the QR codes as below, with your QR code scanner in your smart phone.
TM
Google Play is a trademark of Google Inc. NOTE:
TM
APP Store is a service mark of Apple Inc.
3
*Tips: Please turn on 2 permissions below when use this APP.
1. Allow CloudEdge to access mobile cellular data and wireless LAN, or it will be failed
to add IP camera.
2. Allow CloudEdge to receive pushed messages, or the smart phone will not receive
notifications when motion detection or audible alarm is triggered.
4. Account Registration
New users need to sign up by e-mail/Facebook. Click "Sign up", and follow the steps to
complete the registration, and then log in.
5. Add Camera to APP
.
4
5.1Preparations for connection
5.1.1 Insert Mirco SD card (NOT included) when the camera is turned off, for saving
videos caused by motion detection automatically. (Supports up to128GB,)
5.1.2 Camera only works with 2.4G Wi-Fi,not support 5G.
Step 1
Step 2
Step 3
2.4G ONLY
5.2 Connect Camera to APP
Tap “+” to add device Select Battery Camera
Tap “Next”
Reset it and tap “Next”
Input WIFI Password Prepare the Scanning
Scan QR Code
Finished till 100%
5
6. Camera Installation
6.1 For a wooden wall, it's recommended to screw the
bracket on.
6.2 For a cement or ceramic tile wall, it's
recommended to drill holes in wall and fasten with
explosion screws provided.
Rotate the button counterclockwise to take off the camera.
It is not suggested to install the camera vertically towards the moving objects, otherwise
it may not detect the motion events or cause delay.
It's not suggested to make
the PIR sensor vertically
towards the moving objects
The path of the
moving object
YES
NO
Entrance
7. Monitoring Area
It is suggested to make the angular between PIR and detected objects more than
10 degrees.
6
8. Important Notes for Reducing False Alarms
To reduce false alarms, please note that:
Do not install the camera in a position facing strong lights/mirror/window.
Do not place the camera too close to any angel with busy traffic.
Recommended distance between the camera and motion objects are within10 M (32ft).
Stay away from the outlets, including air conditioner vents, humidifier outlets, the heat
transfer vents of the projectors, etc.
Keep the camera at least 1 meter away from any wireless devices to avoid interference,
such as microwave stove, Wi-Fi routers and etc.
7
8. Device Menu
12
13
15
17
18
19
20
21
22
23
24
25
26
27
28
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16
17
18
19
20
21
22
23
24
25
26
27
28
15
Device List
Add a Camera
Time
Live view button
Camera Name
Cloud Storage
Messages
My Device List
Personal Homepage
Quit live viewing
Setting Manual
Battery Status
HD/SD Switch
Volume On/Off
Full Screen
Preview
Screenshot Button
Body Detection On/Off
Notification History
Cloud Storage
Record on to Phone
Two-Way Talk
Zoom
History Screenshot
Date of History Record
Alarm record Album
History Playback
11
8
Time Bar
SD
14
16
9. Camera Settings
10. PIR Body Detection
10.1.Body Detection Alarm Setting
PIR "Body Detection" is default to be on at "High" level. But it is adjustable.
Please refer to the pictures as below.
9
Tap on “...”
Select “Alarm Setting”
Set it up
Rotate View
Night Vision
Speaker Volume
Power Management
Turn on to Receive
Alarm Message
Share Camera to others
Low/High
SD Capacity/Format
Camera Version
Activate Cloud Storage
*Tips: Higher sensitivity offers longer detecting distance, but it would lead to more false
alarms. You are advised to adjust to “Low” Level when you install the camera outside.
10.2. Alarm Notification
This camera is not designed for7x24 all day recording. It is only triggered when body
motion is detected. Here are system's reactions:
10.2.1 Alarm notifications with sounds from APP
10.2.2 Pictures/videos automatically storage in SD Card or Cloud.
10.3. Records/Playback/Delete
10.3.1 On "MESSAGES" page, click "Alarm Messages”, you can view all the records listed.
10.3.2 Click the following buttons to playback or delete.
10
Click to Playback
Alarm Video
Sensitivity
Low
High
Detecting Distance (For moving and living objects)
Up to 5 meters (16ft)
Up to 10 meters (32ft)
Message-
Alarm Message
Click to Delete
History
Click to Preview
the Snapshot
11. Two - Way Audio
Step 1: Activate the audio option
Step 2: Press and hold the intercom button to speak.
Step 3: Release the button to listen
12. Battery Management
12.1 The camera has a built-in 10400 mAh 18650 battery, which can
be used for 3-6 months, assuming the camera wakes up15 times per day and plays video
for 10 minutes.
*Tips: The battery durability depends on how frequently the camera is woke up. The more
it wakes up, the faster the battery level is consumed. It is recommended to lower down
the “Body Detection” sensitivity or turn it off occasionally.
12.2 When the battery level is less than 20%, the APP will send you reminding messages
for charging in time.
12.3 Charge the camera with DC 5V1A/2A
phone charger, until it is fully charged
after 8-16 hours.
PS:(Adapter Not included)
Light in Red:Charging
Light in Blue: 100% Charged
11
13.Multi Device Management
1
14. Reset
Click "+" to add more devices
Keep pressing to
remove device
Press the reset button
for 3-5s,until hear the
“Boogu” sound
Reconnect as before...
12
Trouble Shooting
Check your Wi-Fi name and password
Ensure your Wi-Fi is 2.4G. Not support 5G
Ensure your camera and phone close to router for set up
Unable to connect
Hear “Boogu”
Keep pressing the reset button for 3~5 seconds
LED blink slowly in Red
Reset
Change to a new network
Remove the camera in CloudEdge APP
Press the reset button to factory setting
Re-connection
Alarm picture without persons
It takes time for camera to wake up, or people move too fast.
Some objects around 36℃ move around.
Frequent Alarm
Camera is trigger frequently. Suggest to adjust the installation angle.
Adjust the camera alarm sensitivity to "Low"
Why is someone crossing
without alarm
Make sure motion detection is turned on.
Beyound the range of PIR monitoring area.
No Alarm Push
Make sure Notification is turned on from CloudEdge and phone
No alarm video
Make sure Micro SD card inserted / Cloud Storage activited
Device Offline
Check the camera if power off
Make sure network is normal
Video Delay
Make sure network is normal
Battery Duribility
Motion detection is trigger frequently / Two-Way Talk
Description
Solution
1
2
3
4
5
6
7
8
9
10
11
No.
13
Unable to charge
Charge at least 8-16 hours with a 5V 1A/2A phone charger correctly.
LED turns to be red means your camera is charging correctly.
Make sure USB power cable and the phone charger both work well
CloudEdge APP Flashback
Phone system version is too low or too high
Unable to register account Make sure to select correct country.
Unable to add friend
Your account and friend’s account must be the same country, or the
same area. For example, accounts in Europe and America
cannot share to each other
12
13
14
15
/
