2. Toro
  3. Air Hammer Adapter Kit, 4045 or 4050 Directional Drill

Toro Air Hammer Adapter Kit, 4045 or 4050 Directional Drill Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Air Hammer Adapter Kit, 4045 or 4050 Directional Drill Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3377-930RevB
AirHammerAdapterKit
4045or4050DirectionalDrill
ModelNo.23832
ModelNo.23832E
InstallationInstructions
InstallingtheAdapter
1.Removeanddiscardtheinletwaterhosefrom
themudpump(Figure1).
2.Removethesprayhosettingfromtheteetting
mountedtothemachinebracket.Donotdiscard
thettings(Figure1).
g023222
Figure1
1.Inletwaterhose3.Existingspray-hose
hardware
2.Machinebracket4.Drillstemhoseandball
valve
3.Assembletheadapterpartswithpipeputtyor
pipe-sealanttapeandinstallittothemachine
bracketasfollows:
Note:Fittingssealedwitho-ringsdonotrequire
pipeputtyorpipe-sealanttape.
A.Installthestraighttting,ballvalve,and
straightttingwithswiveltothehoseand
existinghardware(Figure2).
B.Installtheexistingballvalveandhardware
asshowninFigure2.
C.Installthestraightttingwithswivel,pipe
coupling,pipenipples,ballvalve,and45
degreeelbowtotheteetting(Figure2).
D.Installthelarge-pipenipple,bellreducer,
ttingreducer,andpipenippletothe45
degreeelbow(Figure2).
E.Assemblethesub-assembliestothe
machine.
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
*3377-930*B
g023223
Figure2
1.Hose10.Pipecoupling
2.Straighttting
11.Pipenipple
3.Ballvalve12.Ballvalve
4.Straightttingwithswivel
13.45degreeelbow
5.Existinghardwareandball
valve
14.Fittingreducer
6.Machinebracket15.Bellreducer
7.Existingspray-hose
hardware
16.Large-pipenipple
8.Teetting
17.Drillstemhoseandball
valve
9.Straightttingwithswivel
InstallingtheWireHarness
1.Plugthewireharnessintotheconnectornear
thepumpinlet(Figure3).
2.Plugtheoppositeendofthewireharnesstothe
airhammer.
g023151
Figure3
1.Pumpinlet
2.Connector
2
/