Toro Air Hammer Adapter Kit, 2024 Directional Drill Installation guide
- Type
- Installation guide
FormNo.3377-918RevA
AirHammerAdapterKit
2024DirectionalDrill
ModelNo.23808
InstallationInstructions
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Teetting
1
90degreeelbow2
Pipe(12.7cm[5inches])
1
Ballvalve1
Pipe(22.86cm[9inches])
1
45degreeelbow1
Smallnipple
1
Bell-reducertting
1
Largepipenipple1
Installtheadapter.
Nopartsrequired
–
Installthewireharness.
WARNING
CALIFORNIA
Proposition65Warning
Thisproductcontainsachemicalorchemicals
knowntotheStateofCaliforniatocausecancer,
birthdefects,orreproductiveharm.
InstallingtheAdapter
1.Removethepumptransducerfromtheexistingtee
tting(Figure1).
Figure1
1.Existingteettinginmud
pump
2.Pumptransducer
©2013—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
*3377-918*A
2.Assembletheadapterpartswithpipeputtyor
pipe-sealanttape.RefertoFigure2.
Note:Fittingssealedwitho-ringsdonotrequirepipe
puttyorpipe-sealanttape.
Figure2
1.Mudpump7.Ballvalve
2.Existingteettinginmud
pump
8.Pipe(22.9cm[9inches])
3.Teetting
9.45degreeelbow
4.Existingpumptransducer
10.Smallnipple
5.90degreeelbow
11.Bell-reducertting
6.Pipe(12.7cm[5inches])
12.Largenipple
3.Installtheair-hammeradapterassemblytotheexisting
teetting(
Figure3).
g023170
Figure3
1.Wireharness
2.Existingteetting
InstallingtheWireHarness
1.Plugthewireharnessintotheconnectornearthe
manifold(Figure4).
Figure4
1.Mudpump
2.Connector
2.Plugtheoppositeendofthewireharnessintotheair
hammer.
2
-
1
-
2
Toro Air Hammer Adapter Kit, 2024 Directional Drill Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Raven AccuFlow Vortex Operating instructions
-
-
Smithco Spray Star 1110 Owner's manual
-
-
-
-
-
-
-