2. Toro
  3. 48in Heavy Duty Crumber, RT600 Traction Unit

Toro 48in Heavy Duty Crumber, RT600 Traction Unit, 60in Heavy Duty Crumber, RT600 Traction Unit Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro 48in Heavy Duty Crumber, RT600 Traction Unit Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3377-962RevA
48inHeavy-DutyCrumber
60inHeavy-DutyCrumber
RT600Trencher
ModelNo.25435
ModelNo.25436
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Crumberbar
1
Crumberblade
1
Hex-headbolt(M12x110mm)
4
Locknut(M12)
4
Carriagebolt(1/2x4inch)
2
Washer(1/2inch)
2
Locknut(1/2inch)
2
Installthecrumber.
Note:Youshouldhaveeither2peopleorliftingequipment
toperformthisprocedure.
1.Parkthemachineonarm,levelsurface.
2.Movetheboomtothehorizontalposition.
3.Turnofftheengineandremovethekey.
4.Ifthespacebetweenthemountingplatesistoonarrow
toinsertthecrumberbarbetweenthem,loosenthe
3boltsandthe3locknutsthatsecurethecrumber
mountingbracketstotheboomenoughsothatyoucan
insertthecrumberbarbetweenthem(
Figure1).
G02351 1
1
2
Figure1
1.Crumbermountingbracket
(2)
2.Locknuts
5.Looselyinstallthe4hex-headbolts(M12x110mm)
andthe4locknuts(M12)fromthekitontotheplates,
andinsertthecrumberbarbetweentheplatesandthe
boltsasshownin
Figure2.
©2013—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3377-962*A
Note:Torquetheboltsandlocknutsto124to154
N-m(91to113ft-lb).
G023379
1
2
3
4
Figure2
1.Locknut—M12(4)
3.Mountingplates
2.Crumberbar4.Hex-headbolt(4)
6.Ifyouloosenedthe3boltsandthe3locknutsthat
securethecrumbermountingbracketstothemachine,
torquethemto217to271N-m(160to200ft-lb).
7.Installthecrumberbladeontothecrumberbarwith2
carriagebolts(1/2x4inch),aplate,2washers(1/2
inch),and2locknuts(1/2inch)asshowninFigure3.
Note:Torquetheboltsandlocknutsto91to113
N-m(67to83ft-lb).
G023428
1
3
5
4
6
2
2
Figure3
Theboomandchainarenotshown.
1.Locknuts(1/2inch)4.Crumberbar
2.Washer(1/2inch)5.Carriagebolts(1/2x4
inch)
3.Plate
6.Crumberblade
2
/