Extron DSC HD-HD User manual

Type
User manual
User Guide
DSC HD-HD
Scalers
HDMI-to-HDMI Scaler
68-2635-01 Rev. D
01 19
Safety Instructions
Safety Instructions • English
WARNING: This symbol, , when used on the product, is intended to
alert the user of the presence of uninsulated dangerous voltage within
the product’s enclosure that may present a risk of electric shock.
ATTENTION: This symbol, , when used on the product, is intended
to alert the user of important operating and maintenance (servicing)
instructions in the literature provided with the equipment.
For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron
website, www.extron.com.
Sicherheitsanweisungen • Deutsch
WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer
darauf aufmerksam machen, dass im Inneren des Gehäuses dieses
Produktes gefährliche Spannungen herrschen, die nicht isoliert sind und
die einen elektrischen Schlag verursachen können.
VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in
der im Lieferumfang enthaltenen Dokumentation besonders wichtige
Hinweise zur Bedienung und Wartung (Instandhaltung) geben.
Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,
EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in
den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer
68-290-01) auf der Extron-Website, www.extron.com.
Instrucciones de seguridad • Español
ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,
avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del
producto, lo que puede representar un riesgo de descarga eléctrica.
ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa
al usuario de la presencia de importantes instrucciones de uso y
mantenimiento recogidas en la documentación proporcionada con el
equipo.
Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y temas
relacionados, consulte la Guía de cumplimiento de normativas y seguridad
de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.
Instructions de sécurité • Français
AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le
produit, signale à l’utilisateur la présence à l’intérieur du boîtier du
produit d’une tension électrique dangereuse susceptible de provoquer
un choc électrique.
ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,
signale à l’utilisateur des instructions d’utilisation ou de maintenance
importantes qui se trouvent dans la documentation fournie avec le
matériel.
Pour en savoir plus sur les règles de sécurité, la conformité à la
réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets
connexes, lisez les informations de sécurité et de conformité Extron, réf.
68-290-01, sur le site Extron, www.extron.com.
Istruzioni di sicurezza • Italiano
AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di tensione non isolata pericolosa
all’interno del contenitore del prodotto che può costituire un rischio di
scosse elettriche.
ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di importanti istruzioni di funzionamento
e manutenzione nella documentazione fornita con l’apparecchio.
Per informazioni su parametri di sicurezza, conformità alle normative,
compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento
alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo
68-290-01, sul sito web di Extron, www.extron.com.
Instrukcje bezpieczeństwa • Polska
OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu
poinformować użytkownika o obecności izolowanego i niebezpiecznego
napięcia wewnątrz obudowy produktu, który może stanowić zagrożenie
porażenia prądem elektrycznym.
UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do
ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji
(obsługi) w literaturze, wyposażone w sprzęt.
Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji
wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne,
zobacz Extron bezpieczeństwa i regulacyjnego zgodności przewodnik, część
numer 68-290-01, na stronie internetowej Extron, www.extron.com.
Инструкция по технике безопасности Русский
ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан
на продукте, предупреждает пользователя о наличии
неизолированного опасного напряжения внутри корпуса
продукта, которое может привести к поражению
электрическим током.
ВНИМАНИЕ: Данный символ, , если указан на продукте,
предупреждает пользователя о наличии важных инструкций
по эксплуатации и обслуживанию в руководстве,
прилагаемом к данному оборудованию.
Для получения информации о правилах техники безопасности,
соблюдении нормативных требований, электромагнитной
совместимости (ЭМП/ЭДС), возможности доступа и других
вопросах см. руководство по безопасности и соблюдению
нормативных требований Extron на сайте Extron: ,
www.extron.com, номер по каталогу - 68-290-01.
安全说明 简体中文
警告 产品上的这个标志意在警告用户该产品机壳内有暴露的危险 电压,
险。
注意 产品上的这个标志意在提示用户设备随附的用户手册中有
重要的操作和维护(维修说明。
关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍
使用的特性等相关内容,敬请访问 Extron 网站 , www.extron.com,参见
Extron 安全规范指南,产品编号 68-290-01
안전 지침 • 한국어
경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는
접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을
경고합니다.
주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와
있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.
안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에
대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및
규제 준수 안내서, 68-290-01 조항을 참조하십시오.
安全記事 • 繁體中文
警告: 若產品上使用此號,是為了提醒使用者產品機殼內存
可能會導致觸電之風險的未絕緣危險電
注意 產品使用此符號,是為提醒使用者設備隨附的戶手冊中
重要的操作和維(維修説明
有關安全性指導方法規遵EMI/EMF 相容存取範圍和相關主題的詳細
訊,請瀏覽 Extron 網站www.extron.com然後參閱《Extron 安全性與法規
守手準則編號 68-290-01
安全上の注意 日本語
警告: この 製品上に表示されている場合は、筐体内に絶縁され
いない高電圧が流れ、感電の危険があるこていま
意:この が製上に表示されている場合は、の取扱説書に
されている重作と保()の示についてユーザーの
を喚起するものです
安全上の注意、法規厳守、EMI/EMF適合性、その他の関連項目
スト イト www.extron.com よ り Extron Safety
and Regulatory Compliance Guide』 ( P/N 68-290-01) をご覧ださい。
Copyright
© 2014-2019 Extron Electronics. All rights reserved. www.extron.com
Trademarks
All trademarks mentioned in this guide are the properties of their respective owners.
The following registered trademarks (
®
), registered service marks (
SM
), and trademarks (
TM
) are the property of RGBSystems, Inc. or
ExtronElectronics (see the current list of trademarks on the Terms of Use page at www.extron.com):
Registered Trademarks
(
®
)
Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Glitch Free. Global
Configurator, GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink,
MediaPort, NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, Show Me, SoundField, SpeedMount, SpeedSwitch,
StudioStation, SystemINTEGRATOR, TeamWork, TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP,
XTPSystems, and ZipClip
Registered Service Mark
(SM)
: S3 Service Support Solutions
Trademarks
(
)
AAP, AFL (Accu-RateFrameLock), ADSP(Advanced Digital Sync Processing), Auto-Image, AVEdge, CableCover, CDRS(ClassD
Ripple Suppression), Codec Connect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,
DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, Everlast, FastBite, FOX, FOXBOX, IP Intercom HelpDesk,
MAAP, MicroDigital, Opti-Torque, PendantConnect, ProDSP, QS-FPC(QuickSwitch Front Panel Controller), RoomAgent, Scope-Trigger,
ShareLink, SIS, SimpleInstructionSet, Skew-Free, SpeedNav, Triple-Action Switching, True4K, Vector™ 4K , WebShare, XTRA, and
ZipCaddy
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference. This interference must be corrected at the expense of the user.
ATTENTION: For more information on safety guidelines, regulatory compliances,
EMI/EMF compatibility, accessibility, and related topics, see the “Extron Safety and
Regulatory Compliance Guide” on the Extron website.
NOTE: For more information on safety guidelines, regulatory compliances, EMI/
EMF compatibility, accessibility, and related topics, see the “Extron Safety and
Regulatory Compliance Guide” on the Extron website.
Battery Notice
This product contains a battery. Do not open the unit to replace the battery. If the
battery needs replacing, return the entire unit to Extron (for the correct address, see the
Extron Warranty section on the last page of this guide).
CAUTION: Risk of explosion. Do not replace the battery with an incorrect type. Dispose
of used batteries according to the instructions.
ATTENTION : Risque d’explosion. Ne pas remplacer la pile par le mauvais type de pile.
Débarrassez-vous des piles usagées selon le mode d’emploi.
VCCI-A Notice
の装置はA情報技術装置 の装置を家庭環境で使用電波妨害を引
の場合には使用者が適切な対策を講ず要求があ
CI-A
Conventions Used in this Guide
Notifications
The following notifications are used in this guide:
CAUTION: Risk of minor personal injury.
ATTENTION : Risque de blessuremineure.
ATTENTION:
Risk of property damage.
Risque de dommages matériels.
NOTE: A note draws attention to important information.
TIP: A tip provides a suggestion to make working with the application easier.
Software Commands
Commands are written in the fonts shown here:
^AR Merge Scene,,0p1 scene 1,1 ^B 51 ^W^C.0
[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]
E X! *X1&* X2)* X2#* X2! CE}
NOTE: For commands and examples of computer or device responses used in this
guide, the character “0” is used for the number zero and “O” is the capital letter
“o.”
Computer responses and directory paths that do not have variables are written in the font
shown here:
Reply from 208.132.180.48: bytes=32 times=2ms TTL=32
C:\Program Files\Extron
Variables are written in slanted form as shown here:
ping xxx.xxx.xxx.xxx —t
SOH R Data STX Command ETB ETX
Selectable items, such as menu names, menu options, buttons, tabs, and field names are
written in the font shown here:
From the File menu, select New.
Click the OK button.
Specifications Availability
Product specifications are available on the Extron website, www.extron.com.
Extron Glossary of Terms
A glossary of terms is available at http://www.extron.com/technology/
glossary.aspx.
Contents
Introduction............................................................ 1
About this Guide ................................................. 1
About the DSC HD-HD ....................................... 1
Features ............................................................. 1
Application Diagram ........................................... 3
Installation .............................................................. 4
Rear Panel Connections ..................................... 4
Securing the HDMI Connector Using the
LockIt Bracket .................................................. 5
Connecting for Remote Control .......................... 6
Wiring the Power Connector ............................... 8
Operation .............................................................. 10
Front Panel Features ......................................... 10
On-screen Display ............................................ 11
Menu Overview ............................................. 11
Using the Front Panel Buttons with the
OSD Menus ................................................. 11
Using the OSD Menus .................................. 12
Changing the Output Resolution and Refresh
Rate ................................................................ 19
Custom Rates .............................................. 19
Importing an HDMI EDID............................... 19
Resetting the Output Rate ........................... 20
Locking the Front Panel (Executive Mode) ........ 20
Resetting the Unit ............................................. 20
Remote Configuration and Control ................ 21
SIS Commands ................................................ 21
DSC-initiated Messages ............................... 21
Error Responses ........................................... 22
Using the Command and Response Table .... 22
Symbol Definitions ........................................ 22
Command and Response Table for SIS
Commands ..................................................... 26
Windows-based Configuration Program ........... 32
Downloading the PCS Configuration
Software from the Website ........................... 32
Starting the Configuration Program ............... 34
Mounting ............................................................... 36
DSC HD-HD • Contents v
DSC HD-HD • Contents vi
Introduction
This section provides an overview of the DSC HD-HD scaler, covering the following topics:
About this Guide
About the DSC HD-HD
Features
Application Diagram
About this Guide
The DSC HD-HD User Guide describes the Extron DSC HD-HD Scaler and provides
instructions for experienced installers to install, configure, and operate it.
In this guide, the terms “scaler” and “DSC” are used interchangeably to refer to the
DSC HD-HD.
About the DSC HD-HD
The DSC HD-HD is a single input and output, HDCP compliant, HDMI-to-HDMI scaler
that accepts multiple video resolutions and offers multiple output rates. It provides
30-bit processing and 1080i, 576i, and 480i deinterlacing, as well as embedded audio.
Configuration and control are provided via front panel controls with an on-screen display
(OSD) and a front panel USB Config port. Simple Instruction Set (SIS) commands and the
Windows
®
-based configuration software can be used to communicate with the DSC via
the front panel Config port.
The DSC HD-HD accepts computer and SMPTE video resolutions up to 1920x1200,
1080p @ 60 Hz, and 2K, with output rates from 480p to 1920x1200, including HDTV
1080p @ 60 Hz, and 2K. It can embed two-channel or multi-channel HDMI audio in the
output.
The unit has a compact 1 inch (2.54 mm) high by a quarter-rack wide by 6.5 inches
(21.5 cm) deep enclosure and can be rack or furniture mounted.
Features
HDMI video cross conversion — Provides high quality scaling and conversion of
HDMI video resolutions and frame rates.
Input and output connectors — Include one female HDMI input and one female
HDMI output connector.
Advanced scaling engine — Performs image scaling and video format conversion
at 30-bit precision for enhanced color accuracy and picture detail. High performance
deinterlacing for 480i, 576i, and 1080i signals from HD sources delivers optimized
image quality.
Accepts multiple HDMI signal formats — Accepts HDMI signals with resolutions
up to 1920x1200, 1080p @ 60 Hz, and 2K (2048x1080), and is compatible with
standard definition and high resolution video.
DSC HD-HD • Introduction 1
HDCP compliance — Fully supports HDCP-encrypted sources with selectable
authorization for unencrypted content.
HDCP authentication and signal presence confirmation — Provides real-time
verification of HDCP status for the digital video input and output
HDMI to DVI interface format conversion — Automatically enables or disables
embedded audio and infoframes and sets the correct color space for proper
connection to HDMI and DVI displays.
EDID emulation — Provides selectable resolutions and refresh rates and a means
for specifying the rate of the incoming signal, ensuring proper communication with
the video source.
EDID Minder — Manages EDID communication between connected devices,
ensuring that the source powers up properly and reliably outputs content for display.
Aspect ratio control of video output — Enables selection of a fill mode, which
provides a full screen output, or a follow mode, which preserves the original aspect
ratio of the input signal.
HDCP visual confirmation — A full-screen green signal is sent when
HDCP-encrypted content is transmitted to a non-HDCP compliant display.
Windows-based configuration program — The Product Configuration Software
(PCS) program enables configuration and control of the scaler from a computer via a
USB connection.
Front panel LED indicators — Indicate signal presence, HDCP status, audio
format, and power for real-time feedback and monitoring of key performance
parameters.
On-screen display (OSD)— Provides a menu system that lets you set up the DSC
using the front panel buttons.
Output Standby Mode — Automatically mutes the video and sync output to the
display device when no active input signal is detected. This allows the projector
or flat-panel display to automatically enter into standby mode to save energy and
enhance lamp or panel life.
Automatic 3:2 and 2:2 pulldown detection — These advanced film mode
processing techniques help maximize image detail and sharpness for 480i, 576i, and
HDTV 1080i sources that originated from film.
LockIt HDMI cable lacing bracket is provided.
Internal test patterns — Offers crop, grayscale, color bars, alternating pixels, and
crosshatch patterns, and audio pink noise.
Signal presence confirmation — Provides real-time verification of status for the
digital video input and output through front panel LEDs.
Front panel security lockout (executive mode) — Locks out all front panel
functions. All functions remain available through the configuration software or SIS
commands via the USB connection.
USB control port — The front panel USB Config port enables firmware updates and
configuration of the DSC via SIS commands and the PCS software.
Rack and furniture mounting
DSC HD-HD • Introduction 2
Application Diagram
POWER
12V
0.7A MAX
DSC HD-HD
HDMI INPUT HDMI OUTPUT
LAN
3
21
4
321
MODEL 80
FLAT PANEL
Extron
XTP CrossPoint 1600
Modular Digital Matrix Switcher
Extron
DSC HD-HD
HDMI to HDMI Scaler
VC Codec
HDMI
720p Output Resolution
1920x1200 Input Resolution
Flat Panel Display
1920x1200 Native Resolution
HDMI
HDMI
AUDIO
PRIMARY
REDUNDANT
VIDEO
I/O
POWER
CONTROL
ENTER PRESET
VIEW
ESC
INPUTS
OUTPUTS
1
2
3
4
5
6 7
8
9
10
11
12
14
15
16
13
1
2
3
4
5
6 7
8
9
10
11
12
14
15
16
13
XTP CROSSPOINT 1600
XTP SERIES DIGITAL MATRIX SWITCHER
CONFIG
Figure 1. DSC HD-HD Application Example
DSC HD-HD • Introduction 3
Installation
This section provides a description of the DSC HD-HD rear panel connectors and
instructions for cabling. Topics include:
Rear Panel Connections
Securing the HDMI Connector Using the LockIt Bracket
Connecting for Remote Control
Wiring the Power Connector
ATTENTION:
Installation and service must be performed by authorized personnel.
L’installation et l’entretien doivent être effectués uniquement par un électricien
qualifié.
Rear Panel Connections
CAUTION: Remove power from the system before making any connections.
ATTENTION : Couper l’alimentation avant de faire l’installation électrique.
ATTENTION:
Use electrostatic discharge precautions (be electrically grounded) when making
connections. Electrostatic discharge (ESD) can damage equipment, although you
may not feel, see, or hear it.
Prenez des précautions contre les décharges électrostatiques (soyez
électriquement relié à la terre) lorsque vous effectuez des connexions. Les
décharges électrostatiques (ESD) peuvent endommager l’équipement, même si
vous ne pouvez pas le sentir, le voir ou l’entendre.
POWER
12V
0.7A MAX
DSC HD-HD
HDMI INPUT HDMI OUTPUT
AA
BB
DD
CC
A
Power connector
B
HDMI Input connector
C
LockIt mounting screws
D
HDMI Output connector
Figure 2. DSC HD-HD Rear Panel
DSC HD-HD • Installation 4
A
Power connector — Connect the provided 12 V, 1 A power supply to this 2-pole
captive screw connector (see Wiring the Power Connector on page 8).
ATTENTION:
Do not connect power to the unit until you have read the CAUTION and
ATTENTION notices on page 8.
Ne branchez pas l’alimentation au l’unité avant d’avoir lu les mises en garde
CAUTION et ATTENTION de la page 8.
B
HDMI Input connector — Connect an HDMI source to this female HDMI input
connector. Secure the HDMI input to the HDMI connector using the LockIt bracket
(see Securing the HDMI Connector using the LockIt Bracket).
C
LockIt mounting screws — Use these screws to attach each LockIt lacing bracket
to the HDMI connector below it.
D
HDMI Output Connector — Connect an HDMI display device to this female HDMI
output connector. Secure the HDMI output to the HDMI connector using the LockIt
bracket.
Securing the HDMI Connector Using the LockIt Bracket
After connecting an input or output device to an HDMI connector, secure the connector in
place with the provided LockIt bracket as follows:
1. Plug the HDMI cable into one of the rear panel
HDMI connectors.
2. Loosen the mounting screw directly above the
HDMI connector enough to allow the LockIt lacing
bracket to be placed above it.
3. Place the LockIt lacing bracket onto the screw and
slide it down against the HDMI connector. Tighten
the screw to secure the bracket.
ATTENTION:
Do not overtighten the screw.
Pour éviter d’endommager l’enceinte, ne
serrez pas trop le vis.
4. Loosely wrap the included tie wrap around the
HDMI connector and LockIt lacing bracket.
5. While holding the connector securely against the
lacing bracket, tighten the tie wrap, then remove
any excess length.
6. Repeat steps 1 through 5 for the other HDMI connector.
OUTPUT
3
1
2
3
4
DSC HD-HD • Installation 5
Connecting for Remote Control
The USB Config port on the front panel enables you to connect the DSC to a computer
for configuration and firmware updating via SIS commands or the PCS software:
1. Use a USB A-to-mini-B cable to connect the DSC USB Config port to a USB port on
your computer.
USB Cable
USB Type A
USB Type Mini-B
USB 1
USB
Ports
Computer
DSC HD-HD Front Panel
Extron
DSC HD-HD
HOLD FOR XGA/720p
INPUT
OUTPUT
LPCM-2CH
MULTI-CH
HDCP AUDIO
MENU
ENTER
CONFIG
Figure 3. Connecting the DSC to the Computer
2. Power on both the computer and the DSC.
3. If this is the first time you have connected a DSC to this particular USB port on your
computer, one of the following screens may open:
Windows XP and earlier: If the following screen is displayed, specify whether
you want the computer to connect to Windows Update in order to search the
web for the driver that it needs to communicate with the DSC via the USB port
(this is not necessary if the USB driver already exists on your computer). An
Internet connection may be required.
Figure 4. Found New Hardware Wizard Opening Screen
DSC HD-HD • Installation 6
Select one of the following radio buttons, then click the Next button:
Select the Yes, this time only radio button if you want your computer to
connect to Windows Update only this one time.
Select Yes, now and every time I connect a device if you want the
computer to automatically connect to Windows Update every time the DSC
is connected to this USB port.
Select No, not this time if you do not want the computer to connect to
Windows Update at this time (for example, if the driver is already installed).
NOTE: This wizard appears only the first time you connect the DSC to each
USB port. You do not see the wizard again unless you connect the DSC to a
different USB port on your computer.
Windows 7 and later: A pop-up prompt appears on the Windows taskbar
informing you that Windows is searching Windows Update for USB software.
If desired, click the USB icon to view the progress of the search. The Driver
Software Installation window appears:
Figure 5. Driver Software Installation Window for USB Software
Close the Driver Software Installation window when installation is finished.
4. Windows XP and earlier: Click Next. On the next screen, make sure that the
Install the software automatically (Recommended) radio button is selected,
then click Next (you do not need to insert a disc). Your computer locates the driver
needed for it to communicate with the DSC via the USB port.
Figure 6. Selecting the Radio Button to Install the USB Driver
Automatically
DSC HD-HD • Installation 7
5. Windows XP or earlier: When the Completed screen appears, click Finish.
Windows 7 or later: When the USB software has been located and downloaded,
the message Ready to use appears on the Driver Software Installation screen
(a pop-up message appears above the Windows taskbar if the screen is closed). Click
Close to close the status window.
Wiring the Power Connector
CAUTION: Risk of electric shock. The wires must be kept separate while the
power supply is plugged in. Remove power before wiring.
ATTENTION : Risque de choc électrique. Les deux cordons d’alimentation
doivent être tenus à l’écart l’un de l’autre quand l’alimentation est branchée. Couper
l’alimentation avant de faire l’installation électrique.
ATTENTION:
The power supply must not be permanently fixed to the building structure or
similar structures.
La source d’alimentation ne devra pas être fixée de façon permanente à une
structure de bâtiment ou à une structure similaire.
The power supply must not be located within environmental air handling spaces
or the wall cavity.
La source d’alimentation doit être située à proximité de l’équipement audiovisuel
Extron dans un emplacement habituel, avec un degré de pollution 2, fixée à une
estrade, un bureau, ou dans une baie technique à l’intérieur d’un placard dédié.
The installation must be in accordance with the applicable provisions of the
National Electrical Code ANSI/NFPA 70, Article 725 and the Canadian Electrical
Code, Part 1, Section 16.
Cette installation doit être en accord avec les mesures qui s’applique au National
Electrical Code ANSI/NFPA70, article725, et au Canadian Electrical Code,
partie1, section16.
The power supply must be located in the same vicinity as the Extron AV
processing equipment in an ordinary location, Pollution Degree 2, secured to a
podium, a desk, or an equipment rack within a dedicated closet.
La source d’alimentation doit être située à proximité de l’équipement de
traitement audiovisuel dans un endroit ordinaire, avec un degré2 de pollution,
fixé à un équipement de rack à l’intérieur d’un placard, d’une estrade, ou d’un
bureau.
Always use a power supply provided by or specified by Extron. Use of an
unauthorized power supply voids all regulatory compliance certification and may
cause damage to the supply and the end product.
Utilisez toujours une source d’alimentation fournie ou recommandée par Extron.
L’utilisation d’une source d’alimentation non autorisée annule toute conformité
réglementaire et peut endommager la source d’alimentation ainsi que le produit
final.
If not provided with a power supply, this product is intended to be supplied by a
power source marked “Class 2” or “LPS” and rated at 12 VDC and a minimum of
1.0 A.
Si ce produit ne dispose pas de sa propre source d’alimentation électrique, il doit
être alimenté par une source d’alimentation de classe 2 ou LPS et paramétré à
12 V et 1.0 A minimum.
DSC HD-HD • Installation 8
A 12 VDC, 1 A power supply is provided with the DSC HD-HD. Should it be necessary to
attach a 2-pole captive screw connector to your power supply, follow these instructions:
Captive Screw Connector
Tie Wrap
Heat
Shrink
1/8"
(3 mm)
7/8"
(22 mm)
3/16"
(5 mm) Max.
Figure 7. Wiring the Power Connector
1. Cut the DC output cord to the length needed.
2. Strip the jacket to expose 3/16 inch (5 mm) of the conductors.
ATTENTION:
The length of the exposed wires in the stripping process is critical. The ideal
length is 3/16 inch (5 mm). If the exposed portion is longer, the wires may
touch, causing a short circuit between them. If the exposed wires are shorter,
they can be easily pulled out, even if tightly fastened by the captive screws.
La longueur des câbles exposés est primordiale lorsque l’on entreprend
de les dénuder. S’ils sont un peu plus longs, les câbles exposés pourraient
se toucher et provoquer un court circuit. S’ils sont un peu plus courts, ils
pourraient sortir, même s’ils sont attachés par les vis captives.
Do not tin the wires. Tinned wire does not hold its shape and can become
loose over time.
Ne pas étamer les câbles. Les câbles étamés ne sont pas aussi bien fixés
dans les terminaisons des connecteurs à vis captives et pourraient sortir.
3. Slide the leads into the supplied 2-pole captive screw plug and secure them, using a
small screwdriver.
4. To verify the power cord polarity before connecting the plug, connect the power
supply with no load and check the output with a voltmeter.
5. Use the supplied tie wrap to strap the power cord to the extended tail of the
connector.
DSC HD-HD • Installation 9
Operation
This section discusses the functions available through the front panel and the on-screen
display (OSD) to configure and operate the DSC HD-HD. Topics include:
Front Panel Features
On-screen Display
Changing the Output Resolution and Refresh Rate
Locking the Front Panel (Executive Mode)
Resetting the Unit
Front Panel Features
Extron
DSC HD-HD
HOLD FOR XGA/720p
INPUT
OUTPUT
LPCM-2CH
MULTI-CH
HDCP AUDIO
MENU
ENTER
CONFIG
FF
D
D
C
C
B
B
A
A
EE
A
Status LED
D
Audio LEDs
B
Config port
E
Menu and Enter buttons
C
HDCP LEDs
F
Navigation arrow buttons
Figure 8. DSC HD-HD Front Panel
A
Status LED (power and signal)
Lights amber steadily when the unit is powered on but no signal is present.
Blinks amber every 3 seconds when the unit is in standby mode.
Lights green steadily when both power and an input signal are present.
B
Config port — Connect a computer to this USB mini-B port for device configuration,
control, and firmware upgrades.
C
HDCP LEDs
Input — Lights when an encrypted input signal is detected. It is off when an
unencrypted signal or no active signal is detected.
Output — Lights when the output video signal is encrypted. It is off when the
output signal is unencrypted or there is no display device connected.
D
Audio LEDs
LPCM-2CH: Lights when embedded LPCM two-channel audio is detected. It
is off when there is no signal, or a signal with no audio or multi-channel audio
embedded.
Multi-CH: Lights when embedded multi-channel (three or more channels) or
bitstream (non-PCM) audio is embedded in the signal. It is off if there is no signal,
or a signal with no audio or two-channel audio embedded.
DSC HD-HD • Operation 10
E
Menu and Enter buttons — Enable you to access and make selections from the
on-screen display menus (see Using the Front Panel Buttons with the OSD
Menus for detailed explanations of these buttons and the arrow buttons.
F
Navigation arrow buttons — Enable you to navigate through the OSD submenus.
They include left t, right , up
, and down arrow buttons. You can also press
them to lock the front panel controls (executive mode) (see page 20) and reset
the output rate (see page 20).
On-screen Display
The on-screen display enables you to configure and adjust the DSC HD-HD from menus
displayed on a monitor or other display device connected to the rear panel output.
NOTE: The settings available through these menus can also be selected via SIS
commands (see the Remote Configuration and Control section, beginning on
page 21).
Menu Overview
The OSD main menu has three configuration submenus and a read-only information
screen. The OSD menu table on page 13 summarizes the submenus.
NOTE: The Device Info screen is read-only and gives current device status.
The menu always displays the following items, regardless of which submenu is displayed.
Company name (Extron Electronics) and product name (DSC HD-HD) are in
the upper-left corner.
Firmware version number is in the upper-right corner.
Current input resolution and refresh rate are in the lower-left corner.
Current output resolution and refresh rate are in the lower-right corner.
Using the Front Panel Buttons with the OSD Menus
The front panel navigation buttons enable you to access the OSD and make selections
from its menus.
Menu — Press this button to open and close the OSD. Pressing it from within a
submenu or a submenu item returns you to the next higher menu level.
For example, if you select and highlight a submenu item you did not want, pressing
Menu changes the highlighting of the item to an outline. From there, you can use the
up and down arrow buttons to move the outline to the desired item.
Enter — Press this button to access the items on the displayed submenu (moves a
yellow outline to the first submenu item in the right column). Press this button again
to select the outlined submenu item. You can also use the Enter button to open the
OSD, but not to close it.
Left t and right arrows — Press these buttons to further adjust settings for
selected submenu items.
DSC HD-HD • Operation 11
Up arrow
— Press this button to move upward through main menu and submenu
items. This button also adjusts settings for selected submenu items.
Down arrow — Press this button to move downward through main menu and
submenu items. This button also adjusts settings for selected submenu items.
In addition, you can use this button to reset the output rate (see Resetting the
Output Rate on page 20 and in conjunction with the Menu button to lock the front
panel (see Locking the Front Panel (Executive Mode) on page 20).
Using the OSD Menus
To access and use the DSC HD-HD OSD menus:
1. Press the Menu button once to open the main menu on the display. The menu opens
with the Input submenu displayed and the submenu name highlighted (see figure 9).
Figure 9. OSD Main Menu, Initial View
2. If the desired submenu is not displayed, press the or
button on the DSC front
panel to move the highlighting to the desired submenu.
3. Press the Enter button to access the submenu items. A yellow outline appears
around the first item.
4. Press the or
button to cycle through the submenu until the desired item is
outlined in yellow.
5. Press the Enter button to select the outlined submenu item. The selection is
highlighted in yellow.
DSC HD-HD • Operation 12
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45

Extron DSC HD-HD User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI