Dorel Home HD80037 Installation guide

Type
Installation guide

This manual is also suitable for

9866012COM
3 In One Desk
B349866012COM0
THIS INSTRUCTION BOOKLET CONTAINS
IMPORTANT
SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Follow Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Assembly Difficulty Meter
Easy
Tough
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal injuries can occur
from tipping furniture.
WARNING: Manufacturer assumes no liabilty for
improper instalation or excessive loads placed
on screws or bracket. This wall anchor is not a
substitue for the proper adult supervision.
Secure Your Furniture
Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a
R
(right) and
L
(left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 2-3 HOURS
3
ameriwoodhome.com
Before You Start
P
Q
u
i
c
k
T
i
p
A
s
s
e
m
bl
y
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P
4
ameriwoodhome.com
Board Identification
Not actual size
Tube
You
Dresser Left Panel
39866012010
Dresser Right Panel
39866012020
Dresser Top
39866012030
Dresser Bottom
39866012040
Desk Right Panel
39866012110
Dresser Shelf
39866012050
Dresser Leg
39866012060
Desk Left Panel
39866012100
Desk Top
39866012090
Stringer
39866000070
x2
Kick
39866012080
Adjustable Shelf
39866012130
x3
Drawer Front
39866012140
A
B
C
D
E
F
G
H
I
K
J
M
N
x3
Drawer Brace
35538000121
L
5
ameriwoodhome.com
Board Identification
Not actual size
Tube
You
x3
Drawer Bottom
39991340062410D
Warning Label
B64339
Back Panel
K986601200
x3
Drawer Back
39991167061450B
x6
Drawer Side
39991167346200C
These pieces are paperboard
construction.
They are not made from wood, but are
required for the assembly of your unit.
Q
DWR
SIDE
DWR
SIDE
DWR
SIDE
DWR
BACK
DWR
BACK
A
B
C
D
J
K
I
P
O
E
F
L
Q
G
H
M
Modesty
39866012140
O
P
AVERTISSMENT
WARNING
6
ameriwoodhome.com
Part List
Actual Size
Tube
You
Not Actual Size
(x24)
#A22620
Cam Lock
2
9
10
3
6
15
14d
14c
14b
14a
(x24)
#A22610
Cam Bolt
1
4
5
7
11
12
(x2)
#A22910
Connector Bolt
(x10)
#A53600
Angle Bracket
(x4)
#A80250
Shelf Support
(x7)
#A13410
Screw
(x18)
#A21970
Drive Fastner
(x44)
#A12120
Screw
(x30)
#A11080
Screw
(x40)
#A21110
Nail
(x6)
#A12700
Screw
(x2)
#A22920
Connector Housing
(x6)
#A54520
Drawer Bracket
(x1)
#A84050
Safety Bracket Kit
16
(x3)
#A50695
Handle
17a
17b
17c
17d
Left Cabinet Member
Right Cabinet Member
Left Drawer Member
Right Drawer Member
(x3)
#A56770
Drawer Slide Kit
13
(x10)
#A21660
wood dowel
(x3)
#A21520
compression dowel
18
8
7
ameriwoodhome.com
STEP
1
(x2)
#A22620
2
13
13
2
1
2
2
A
(x3)
#A22610
(x1)
#A21660
finished edge
1
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
8
ameriwoodhome.com
STEP2
finished edge
17a
Left Cabinet Member
Marked with a "L"
(x3)
#A56770
(x9)
#A11080
A
10
10
17a
marked with an 'L'
Note that the slide sets come bundled together. Each
bunndle will make one drawer. You will need to open all
3 bundles to complete this step. See page 6 of these
instructions for clarification of what is in a bundle.
Screw Position / PosciĆ³n del tornillo / Position de la vis
9
ameriwoodhome.com
STEP3
2
13
2
13
(x5)
#A22610
(x2)
#A22620
(x1)
#A21660
1
finished edge
finished edge
1
1
2
2
2
B
B
Proper orientation of CAM LOCK
Tip
Assembly
Quick
10
ameriwoodhome.com
STEP
4
10
17b
Right Cabinet Member
(x3)
#A56770
(x9)
#A11080
Marked with a "R"
finished edge
10
B
17b
Note that the slide sets come bundled together. Each
bunndle will make one drawer. You will need to open all
3 bundles to complete this step. See page 6 of these
instructions for clarification of what is in a bundle.
Screw Position / PosciĆ³n del tornillo / Position de la vis
marked with an 'R'
11
ameriwoodhome.com
STEP
5
2
14a
14b
2
C
(x4)
#A22610
(x1)
#A84050
Do not fully tighten this screw.
finished edge
2
2
14a
14b
12
ameriwoodhome.com
STEP6
A
D
13
13
1
(x2)
#A22620
(x1)
#A21660
8
3
3
(x2)
#A22910
(x2)
#A13410
8
8
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
13
ameriwoodhome.com
STEP
7
13
1
13
1
1
1
1
(x4)
#A21660
(x6)
#A22620
1
13
1
G
E
Proper orientation of CAM LOCK
Tip
Assembly
Quick
13
13
14
ameriwoodhome.com
STEP8
E
G
D
A
U
N
L
O
C
K
L
O
C
K
15
ameriwoodhome.com
STEP9
A
D
E
G
B
8
8
(x2)
#A13410
8
Press the right panel (B) against the Stringer (G) and the Dresser Shelf (E) so the cam bolts (2)
insert into the end hole of the Stringer (G) and the Dresser Shelf (E). Turn the cam locks (1)
clockwise to lock in place. Attach the bottom (D) to the right panel (B) with two screws (8) as
shown.
U
NL
O
C
K
L
O
C
K
16
ameriwoodhome.com
STEP10
B
D
G
E
A
C
finished edge
U
N
L
O
C
K
L
O
C
K
17
ameriwoodhome.com
STEP
11
(x36)
#A21110
Assure that the unit is
square. Distance from
corner to corner are equal.
IMPORTANT!
THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
Position the back panel as shown. Flush the bottom edge of the back panel with the bottom edge
of the bottom (D). Align squarely and nail (6) straight into back edges as shown.
Flush edge of back panel
with edge of bottom.
Notch in back panel
positioned here.
D
A
11
11
WITH THE HELP OF ANOTHER PERSON, TURN UNIT OVER
Raw edge
Q
18
ameriwoodhome.com
STEP12
4
4
4
(x2)
#A22920
F
You will need to tap the connector
(4) with a hammer to fully insert.
Be sure the connector is positioned
as shown before pushing into hole.
19
ameriwoodhome.com
STEP13
Raw edge
F
D
U
NL
O
C
K
L
O
C
K
20
ameriwoodhome.com
STEP
14
6
5
(x8)
#A53600
(x16)
#A12120
H
H
6
6
5
D
WITH THE HELP OF ANOTHER PERSON,
TURN UNIT ON TOP SIDE (C)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Dorel Home HD80037 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI