Nostalgic Warehouse 771875 Installation guide

771875
Nostalgic Warehouse
Brand
Nostalgic Warehouse
Model
771875
Type
Installation guide
Measure from the oor to the center of existing locks,
and use this distance as the height of the dummy mount.
If there are no existing locks, position the dummy
mount 36” to 38” from the oor.
2 Fold template along dotted line,
and position fold on the edge of the door.
Tape template to face of door.
3 Before drilling verify the backset
of your existing doors. Drill pilot holes
using a 7/64” diameter bit.
4 Insert four wood screws
into dummy mount,
slide rosette over over
mount, slide knob on
mount, press and hold
in position.
8 Tighten hex screw.
FLOOR
DUMMY MOUNT
(1)
TEMPLATE
EDGE OF DOOR
FACE OF DOOR
DUMMY INSTALLATION AND DOOR PREPARATION TEMPLATE - LEVER
TOP TOP
Page 4 - PK#300 08012019
  • Page 1 1

Nostalgic Warehouse 771875 Installation guide

771875
Nostalgic Warehouse
Brand
Nostalgic Warehouse
Model
771875
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents