Ace Floating Golf Green Target Installation Instructions
Inventory:
4 plastic nails, 4 plastic washers
1 floatation panel
1 piece of fringe
1 four inch plastic cup
1 tee box
1 practice green flag and flag pole
12 golf balls
Instructions:
1. Poke 4 pilot holes in Fringe Turf about 5 inches from the cup hole equal distance apart. From the top
side of the fringe turf, insert 4 plastic nails.
2. Insert cup into floatation pad, position Fringe Turf over cup ensuring the corners of the turf roughly
match the corners of the floatation device.
3. Insert nails through pad using your thumb or lightly hitting with a small hammer. Work your way
around ensuring as you go there are no wrinkles in the fringe.
4. From bottom feel plastic nails under pad and attach washers to nails. Use same tool as pilot hole to
pull synthetic grass out from around the nail head to hide nail head.
5. Lift green into pool, adjust cup, install flag and flag pole and start chipping.
6. Enjoy your “ACE” Floating Golf Green Target.
-
1
