RocketFish RF-TVMLPT03V3 User manual

Category
Flat panel wall mounts
Type
User manual

This manual is also suitable for

RocketFish RF-TVMLPT03V3 is a TV wall mount designed to securely mount your TV to a wood stud or concrete wall. It has a weight capacity of 130 lbs. (58.9 kg) and can accommodate TVs with screen sizes ranging from 32 to 70 inches diagonally. The mount is easy to install and comes with all the necessary hardware. It also features a built-in level to ensure that your TV is mounted straight.

RocketFish RF-TVMLPT03V3 is a TV wall mount designed to securely mount your TV to a wood stud or concrete wall. It has a weight capacity of 130 lbs. (58.9 kg) and can accommodate TVs with screen sizes ranging from 32 to 70 inches diagonally. The mount is easy to install and comes with all the necessary hardware. It also features a built-in level to ensure that your TV is mounted straight.

TV WALL MOUNT
RF-TVMLPT03V3
ASSEMBLY GUIDE
Safety information and specifications......................2
Tools needed......................................................................3
Package contents .............................................................3
Installation instructions .................................................5
For wood-stud and concrete
wall installations
Before using your new product, please read these instructions to prevent any damage.
2
Need help? Call 1-800-620-2790 (U.S. and Canada)
Safety information and specifications
IMPORTANT
SAFETY
INSTRUCTIONS
- SAVE THESE
INSTRUCTIONS
CAUTION: Do not use this
product for any purpose not
explicitly specified by
Rocketfish.
Improper installation may
cause property damage or
personal injury. If you do
not understand these
directions, or have doubts
about the safety of the
installation, contact Customer Service or call a qualified contractor. Rocketfish is not
responsible for damage or injury caused by incorrect installation or use.
The weight of your TV must not exceed 130 lbs. (58.9 kg). The wall must be capable of
supporting five times the weight of your TV and wall mount combined.
This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children!
Maximum TV weight: 130 lbs. (58.9 kg)
Screen size: 32" to 70" diagonal
Overall dimensions (H × W × D):
17.4 x 26.5 x 2 in. (44.2 x 67.3 x 5 cm)
Wall-mount weight: 6 lbs. (2.7 kg)
Were here for you
www.rocketfishproducts.com
For customer service, call:
1-800-620-2790 (U.S. and Canada)
17.4" (44.2 cm)
26.5" (67.3 cm)
3
Need help? Call 1-800-620-2790 (U.S. and Canada)
TV WALL MOUNT RF-TVMLPT03V3
Tools needed
You will need the following tools to assemble your new TV wall mount:
Package contents
Make sure that you have all the hardware necessary to assemble your new TV wall
mount:
Edge-to-edge
stud finder
Pencil
Level
Phillips screwdriver
Socket wrench with
1/2" (13 mm) socket or
adjustable wrench
Measuring tape
Drill
Tape
Hammer
7/32" (5.5 mm) wood drill bit
for wood stud wall
OR
3/8" (10 mm) masonry drill
bit for concrete wall
Top
Dessus
Parte superior
Top
Dessus
Parte superior
RF-TVMLPT03V2 Template • Gabarit • Plantilla
Note: For wood frame installations, use a stud nder to
locate wood studs rst.
Remarque : Pour une construction à ossature de bois,
localiser d'abord les montants en bois, à l'aide d'un
détecteur de montants.
Nota: para la instalación en construcciones de armazón
de madera, primero debe localizar las vigas de madera
con un localizador de vigas.
Need help deciding how high to mount your TV? Scan this QR code.
Besoin d'aide pour déterminer la hauteur de montage du téléviseur?
Numériser ce code QR.
¿Necesita ayuda para determinar la altura de montaje de su televisor?
Escanee este código QR.
V2 13-0197
Tools Needed
Outils nécessaires
Herramientas requeridas
C Right vertical
TV bracket (1)
B Left vertical TV
bracket (1)
A Wall plate (1)
D Template (1)
4
Need help? Call 1-800-620-2790 (U.S. and Canada)
TV Hardware Bag
Lbl Hardware Qty.
E4
F4
G4
H4
I4
J4
K4
L4
M4
M4 × 12 mm
screw
M4 × 35 mm
screw
M6/M8 washer
22 mm spacer
2.5 mm spacer
M6 × 12 mm
screw
M6 × 35 mm
screw
M8 × 16 mm
screw
Concrete Installation Kit CMK1 (not included)
Contact customer service at 1-800-359-5520 to have these additional parts shipped directly to you.
U4
Concrete anchors (Fischer UX10 x 60R)
Lbl Hardware Qty.
N4
O4
P4
Q4
R4
S4
T4
M8 × 20 mm
screw
M8 × 25 mm screw
M8 × 35 mm screw
M8 × 45 mm screw
M8 × 50 mm screw
Lag bolt washer
5/16" × 2 3/4" lag bolt
5
Need help? Call 1-800-620-2790 (U.S. and Canada)
TV WALL MOUNT RF-TVMLPT03V3
Installation instructions
STEP 1 - Determine whether your TV has a flat back or an
irregular or obstructed back
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 If your TV has a table-top stand attached, remove the stand. See the
documentation that came with your TV for instructions.
3 Temporarily lay the TV brackets (B and C) on the back of your TV in a vertical
orientation.
4 Align the screw holes in the TV brackets with the mounting screw holes on your
TV.
5 Identify which type of back your TV may have:
Flat back: The brackets lay flush against the back of your TV and does
not block any jacks. You do not need spacers when assembling the wall
mount.
Obstructed back: The brackets block any of the jacks on the back of
your TV. You will need spacers (I or J) when assembling the wall mount.
Irregularly-shaped back: There is a gap between the brackets and
some part of the back of your TV. You will need spacers (I or J) when
assembling the wall mount.
6 Remove the TV brackets (B and C).
6
Need help? Call 1-800-620-2790 (U.S. and Canada)
STEP 2 - Select screws, washers, and spacers
1 Select the hardware for your TV (screws, washers, and spacers). A limited number of
TVs come with mounting hardware included. (If there are screws that came with the
TV, they are almost always in the holes on the back of the TV.) If you don't know the
correct length of the mounting screws your TV requires, test various sizes by hand
threading the screws.
Select one of the following types of screws:
Select M4 washers (G) or M6/M8 washers (H).
For an irregular or obstructed TV back, use the 22 mm spacers (I) or 2.5 mm
spacers (J).
CAUTION: To avoid potential personal injuries and property damage, make sure
that there are adequate threads to secure the brackets to your TV. If you encounter
resistance, stop immediately and contact customer service. Use the shortest screw
and spacer combination to accommodate your TV. Using hardware that is too long
may damage your TV. However, using a screw that is too short may cause your TV to fall from
the mount.
2 Remove the screws.
3 For a flat back TV, go to “STEP 3 - Option 1: Attaching the mounting hardware to
TVs with a flat back” on page 7.
-OR-
For an obstructed back, go to “STEP 3 - Option 2: Attaching the mounting
hardware to TVs with irregular or obstructed backs” on page 8.
M4 × 12 mm screws (E) M8 × 20 mm screws (N)
M4 × 35 mm screws (F) M8 × 25 mm screws (O)
M6 × 12 mm screws (K) M8 × 35 mm screws (P)
M6 × 35 mm screws (L) M8 × 45 mm screws (Q)
M8 × 16 mm screws (M) M8 × 50 mm screws (R)
Screw is
too long
Screw fits
correctly
Screw is
too short
7
Need help? Call 1-800-620-2790 (U.S. and Canada)
TV WALL MOUNT RF-TVMLPT03V3
STEP 3 - Option 1: Attaching the mounting hardware to
TVs with a flat back
1 Align the holes you noted on the TV brackets (B and C) with the screw holes on
the back of your TV. The brackets are marked “R” for the right bracket and “L for
the left bracket. Make sure that the brackets are level.
2 Place the washers (G or H) over the holes in the TV brackets that align with the
screw holes on the back of your TV, then insert the screws (E, K, M, N, or O)
through the washers.
3 Tighten the screws until they are snug against the TV bracket. Do not over
tighten.
You’ll need
R
L
OR
OR
OR OR OR
G (4)
H (4)
E (4) K (4) M (4)
Phillips screwdriver
oror
or
Screws
or
N (4)
Washers
Level
(B and C) TV
Brackets
or
O (4)
8
Need help? Call 1-800-620-2790 (U.S. and Canada)
STEP 3 - Option 2: Attaching the mounting hardware to
TVs with irregular or obstructed backs
1 Align the TV brackets (B and C) with the screw holes on the back of the TV.
2 Place spacers (I or J) behind the TV brackets and the washers (G or H) over the
holes in the TV bracket, then insert the screws (F, L, P, Q or R) through the
washers, TV bracket, and spacers. Make sure the brackets are level.
3 Tighten the screws until they are snug against the TV bracket. Do not over
tighten.
You’ll need
R
OR
OR
OR
L
G (4)
H (4)
F (4)
L (4)
P (4)
Phillips screwdriver
or
or
or
Screws
Washers
I (4)
Level
(B and C)
TV Brackets
Q (4)
or
R (4)
J (4)
9
Need help? Call 1-800-620-2790 (U.S. and Canada)
TV WALL MOUNT RF-TVMLPT03V3
STEP 4 - Determine wall-mount location
Note:
For more detailed information on determining where to drill your holes, visit our online
height-finder at: http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder
Your TV should be high enough so your eyes are level with the middle of the screen.
Normally, 40 to 60 inches from the ground.
The center of your TV will match the center of the wall plate (A). Before you drill holes
in the wall:
1 Measure the distance from the bottom of your TV to the middle (half of the
height of the TV). This is measurement a.
2 Measure the distance from the floor to where you want the bottom of the TV to
be placed on the wall. Keep in mind that the bottom of the TV should be placed
above any furniture (such as entertainment centers or TV stands). The TV should
also be above items placed on top of the furniture (like a Blu-ray player or cable
box). This is measurement b.
3 Add a + b. The total measurement is the height where you want the center of the
TV bracket to be on the wall.
4 Use a pencil to mark this spot on the wall.
You’ll need
A
B
b
a
Measuring tape
Pencil
10
Need help? Call 1-800-620-2790 (U.S. and Canada)
STEP 5 - Option 1: Installing on a wood stud wall
Note: Drywall covering the wall must not exceed 5/8" (16 mm).
1 Locate the stud. Verify the center of the stud with an edge-to-edge stud finder.
2 Align the wall plate template (D) at the height you determined in the previous
step and make sure that it is level. Tape the wall plate template to the wall, then
use a pencil to mark the lag bolt hole locations (4) on the stud centers. Remove
the wall plate template.
3 Drill pilot holes to a depth of 3 in. (75 mm) using a 7/32 in. (5.5 mm) diameter drill
bit.
4 Align the wall plate (A) with the pilot holes, insert the lag bolts (T) through the
lag washers (S) and the holes in the wall plate, then tighten the lag bolts only
until they are firm against the wall plate.
CAUTION: Avoid potential injuries or property damage!
DO NOT over-tighten the lag bolts (T).
11
Need help? Call 1-800-620-2790 (U.S. and Canada)
TV WALL MOUNT RF-TVMLPT03V3
You’ll need
T
o
p
D
e
s
s
u
s
P
ar
t
e
s
u
p
e
r
i
o
r
Top
D
e
s
s
u
s
Pa
rt
e
s
u
p
e
r
i
o
r
R
F
-
T
V
ML
P
T
0
3V
2
T
e
m
p
l
at
e
G
ab
ari
t
P
l
an
t
i
l
l
a
N
o
t
e
:
F
o
r
w
o
o
d
fra
me
i
n
sta
l
l
a
tion
s,
us
e
a
s
tud
n
d
er
to
l
o
c
a
te
w
o
o
d
stud
s
s
t.
R
e
m
a
r
q
ue
:
P
o
u
r
u
n
e c
o
n
s
t
r
u
c
t
i
o
n
à
o
s
s
a
t
ure
d
e
b
o
is
,
lo
c
a
l
iser
d
'
a
b
o
r
d
l
es
m
o
n
t
a
n
ts en
b
o
is
,
à
l
'
a
i
d
e
d
'
u
n
d
étecteur
de mo
n
ta
n
ts
.
Not
a
: p
a
r
a
l
a
i
n
sta
l
ac
ión
en
c
o
n
str
u
c
c
ion
es
de
a
r
m
a
z
ó
n
d
e
m
a
d
era,
p
r
i
mer
o
d
ebe lo
c
a
l
iz
a
r
l
a
s
v
i
g
a
s
d
e
ma
d
e
r
a
c
o
n
un
l
o
c
a
l
iz
a
d
o
r
d
e
v
ig
a
s.
N
e
e
d
h
e
l
p
d
ec
i
d
i
n
g
h
ow
h
i
g
h
t
o
m
o
u
n
t
y
o
u
r
T
V
?
S
c
a
n
t
h
i
s
Q
R
c
o
d
e
.
B
e
s
oi
n
d
'
a
i
d
e
p
o
ur
d
é
t
erm
i
n
e
r
l
a
ha
u
t
e
u
r
de
m
on
t
a
g
e
d
u
t
él
é
v
i
s
eur?
N
u
m
é
r
ise
r
c
e
c
od
e
Q
R
.
¿
N
e
c
es
i
t
a
a
y
u
da
p
a
r
a
d
et
e
rm
i
n
a
r
l
a
a
l
t
u
r
a
de
m
on
t
a
j
e
d
e
s
u
t
e
l
e
v
i
s
o
r
?
E
sc
a
n
e
e
e
s
t
e
c
ó
d
ig
o
Q
R
.
V
2
1
3
-
0
1
9
7
T
o
o
ls
N
ee
d
e
d
Out
i
l
s
n
é
c
e
ss
a
i
r
e
s
H
e
r
r
a
m
i
e
n
t
as
r
eq
u
e
r
id
a
s
Center pencil mark
made in Step 4.
3 in.
(75 mm)
Note: Minimum wood stud size:
Nominal 2 x 4 in. (51 x 102 mm).
Actual 1.5 x 3.5 in. (38 x 89 mm).
Note: The minimum
distance between
fasteners cannot be less
than 16 in. (406 mm).
Edge-to edge
stud finder
Lag bolt T (4)
Pencil
Drill
7/32" wood drill bit 1/2" socket wrench
Level
Template (D)
Tape
Wall plate (A)
Top
Dessus
Parte superior
Top
Dessus
Parte superior
RF-TVMLPT03V2 Template • Gabarit • Plantilla
Note: For wood frame installations, use a stud nder to
locate wood studs rst.
Remarque : Pour une construction à ossature de bois,
localiser d'abord les montants en bois, à l'aide d'un
détecteur de montants.
Nota: para la instalación en construcciones de armazón
de madera, primero debe localizar las vigas de madera
con un localizador de vigas.
Need help deciding how high to mount your TV? Scan this QR code.
Besoin d'aide pour déterminer la hauteur de montage du téléviseur?
Numériser ce code QR.
¿Necesita ayuda para determinar la altura de montaje de su televisor?
Escanee este código QR.
V2 13-0197
Tools Needed
Outils nécessaires
Herramientas requeridas
S (4)
12
Need help? Call 1-800-620-2790 (U.S. and Canada)
STEP 5 - Option 2: Installing on a solid concrete or concrete
block wall
CAUTION: To prevent property damage or personal injury, never drill
into mortar between blocks. Mount wall plate directly onto the
concrete surface.
1 Align the wall plate template (D) at the height you determined in the previous
step and make sure that it is level. Tape the wall plate template to the wall, then
use a pencil to mark the lag bolt hole locations (4). Remove the wall plate
template.
2 Drill pilot holes to a depth of 3 in. (75 mm) using a 3/8 in. (10 mm) diameter
masonry drill bit.
3 Insert the concrete wall anchors* into the pilot holes and use a hammer to make
sure the anchors are flush with the concrete surface.
4 Align the wall plate (A) with the anchors, insert the lag bolts (T) through the lag
washers (S) and the holes in the wall plate, then tighten the lag bolts only until
they are firm against the wall plate.
CAUTION: Avoid potential injuries or property damage!
DO NOT over-tighten the lag bolts (T).
*Not included. Call Customer Service to have the Fischer UX10 x 60R concrete anchor
kit shipped directly to you.
13
Need help? Call 1-800-620-2790 (U.S. and Canada)
TV WALL MOUNT RF-TVMLPT03V3
You’ll need
T
o
p
D
e
s
s
u
s
P
a
r
t
e
su
p
e
r
i
o
r
To
p
D
e
s
s
u
s
Pa
r
t
e
s
u
p
e
r
i
o
r
RF
-
TV
M
L
P
T03
V2
T
emp
l
a
t
e •
Ga
b
a
r
i
t
P
l
a
n
ti
l
l
a
N
o
t
e
:
F
o
r
w
o
o
d
f
r
a
m
e
ins
t
a
l
l
ati
o
n
s
,
u
s
e
a
s
t
u
d
er
to
l
oc
ate
w
o
o
d
s
tud
s
s
t.
R
em
a
r
q
u
e
:
P
o
u
r
une
c
o
n
s
t
r
u
c
t
i
o
n
à
o
s
s
atu
r
e
de b
o
is
,
l
o
c
al
is
er
d'
a
b
o
r
d
les
m
o
n
t
a
n
t
s
e
n
b
o
is
,
à
l
'
aide
d
'
u
n
d
é
tec
t
e
u
r
d
e
m
o
nt
a
n
t
s
.
N
o
t
a
:
p
ar
a
l
a
i
ns
tal
a
c
n
e
n
c
o
ns
t
r
uc
c
io
nes
de
a
r
m
az
ó
n
d
e
m
a
d
era,
p
r
i
m
er
o
d
eb
e
l
o
c
a
l
iz
a
r
l
as
v
i
g
a
s
de
m
ad
e
r
a
c
o
n
un
lo
c
a
l
iz
a
d
o
r
d
e
v
i
g
as
.
Ne
e
d
h
e
l
p
d
e
c
i
d
i
ng
h
ow
h
ig
h
t
o
m
o
u
n
t
y
o
u
r
T
V
?
S
c
a
n
th
is
Q
R
co
d
e
.
B
e
s
o
i
n
d
'
a
i
d
e
p
ou
r
d
é
t
e
r
m
i
n
er
l
a
h
a
u
t
e
u
r
d
e
m
o
n
t
a
g
e
du
t
é
v
is
e
u
r
?
Nu
m
é
r
i
s
e
r
c
e
c
o
d
e
Q
R
.
¿
N
e
ce
s
i
t
a
a
y
u
d
a
p
ar
a
de
t
er
m
i
n
a
r
l
a
a
lt
ur
a
d
e
m
o
n
t
a
j
e
d
e
su
t
e
le
v
iso
r
?
E
s
c
a
n
e
e
e
s
t
e
d
i
g
o
Q
R
.
V
2
13
-
0
1
9
7
T
o
ol
s
N
e
e
de
d
O
u
t
i
ls
n
é
c
e
s
s
a
i
r
es
H
e
r
r
a
m
i
e
n
t
a
s
r
e
qu
e
r
i
da
s
See Note*
3 in.
(75 mm)
Note: Minimum solid concrete thickness: 8 in (203
mm). Minimum concrete block size: 8 x 8 x 16 in.
(203 x 203 x 406 mm).
Note: The minimum
distance between the top
two fasteners cannot be less
than 16 in. (406 mm).
* Note: Not included. Call
Customer Service to have
the Fischer UX10 x 60R
concrete anchor kit
shipped directly to you.
Lag bolt T (4)
Pencil
Drill
1/2" socket wrench
Level
Hammer
3/8" masonry drill bit
Tape
Template (D)
Wall plate (A)
Top
Dessus
Parte superior
Top
Dessus
Parte superior
RF-TVMLPT03V2 Template • Gabarit • Plantilla
Note: For wood frame installations, use a stud nder to
locate wood studs rst.
Remarque : Pour une construction à ossature de bois,
localiser d'abord les montants en bois, à l'aide d'un
détecteur de montants.
Nota: para la instalación en construcciones de armazón
de madera, primero debe localizar las vigas de madera
con un localizador de vigas.
Need help deciding how high to mount your TV? Scan this QR code.
Besoin d'aide pour déterminer la hauteur de montage du téléviseur?
Numériser ce code QR.
¿Necesita ayuda para determinar la altura de montaje de su televisor?
Escanee este código QR.
V2 13-0197
Tools Needed
Outils nécessaires
Herramientas requeridas
S (4)
Concrete Anchor U (4)
14
Need help? Call 1-800-620-2790 (U.S. and Canada)
STEP 6 - Attach your TV to the wall mount
Holding the TV with the top of the screen tilted toward the wall, slide the
upper notches of the right and left TV brackets (B and C) over the upper
lip of the wall plate (A). Then, gently lower the TV until the lock engages
the lower lip of the wall plate (A). You will hear a click when the TV locks
into place.
and
HEAVY! You will
need assistance
with this step.
15
Need help? Call 1-800-620-2790 (U.S. and Canada)
TV WALL MOUNT RF-TVMLPT03V3
STEP 7 - Adjusting the tilt angle
1 Adjust the swivel tension by hand or by using a 3/16" hex key (not included),
then adjust the tilt angle by gripping the top and bottom of the TV and manually
moving the TV to the angle you want. When you are done adjusting the tilt
tension, retighten the knob, but do not over-tighten. Tighten the swivel tension
after the adjustments have been made.
2 Adjust the level by loosening and tightening the screws on the tops of the
vertical brackets.
You’ll need
10°
Phillips screwdriver
Level
16
Need help? Call 1-800-620-2790 (U.S. and Canada)
Removing the TV from the wall mount
Pull the latches down to unlock the TV from the wall mount, then pull
the bottom of the TV out from the wall and lift it up and off the wall
plate.
For customer service, call: 1-800-620-2790 (U.S. and Canada)
17
Need help? Call 1-800-620-2790 (U.S. and Canada)
TV WALL MOUNT RF-TVMLPT03V3
LIFETIME LIMITED WARRANTY
Definitions:
The Distributor* of Rocketfish branded products warrants to you, the original
purchaser of this new Rocketfish-branded product (“Product”), that the Product shall
be free of defects in the original manufacturer of the material or workmanship for a
period of one (1) year from the date of your purchase of the Product (“Warranty
Period).
For this warranty to apply, your Product must be purchased in the United States or
Canada from a Best Buy branded retail store or online at www.bestbuy.com or
www.bestbuy.ca and is packaged with this warranty statement.
How long does the coverage last?
The Warranty Period lasts for the useful life of the Product beginning on the date you
purchased the Product. Your purchase date is printed on the receipt you received
with the Product. In the event the Distributor ceases to sell the covered
Rocketfish-branded product, this Limited Lifetime Warranty shall terminate for that
product and there shall be no repair or replacement of the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or
workmanship of the Product is determined to be defective by an authorized
Rocketfish repair center or store personnel, Rocketfish will (at its sole option): (1)
repair the Product with new or rebuilt parts; or (2) replace the Product at no charge
with new or rebuilt comparable products or parts. Products and parts replaced under
this warranty become the property of Rocketfish and are not returned to you. If
service of Products or parts are required after the Warranty Period expires, you must
pay all labor and parts charges. This warranty lasts as long as you own your
Rocketfish Product during the Warranty Period. Warranty coverage terminates if you
sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a Best Buy retail store location or from a Best Buy
online website (www.bestbuy.com or www.bestbuy.ca), please take your original
receipt and the Product to any Best Buy store. Make sure that you place the Product
in its original packaging or packaging that provides the same amount of protection
as the original packaging.
To obtain warranty service, in the United States call 1-888-BESTBUY or in Canada call
1-866-BESTBUY. Call agents may diagnose and correct the issue over the phone.
Where is the warranty valid?
This warranty is valid only in the United States and Canada at Best Buy branded retail
stores or websites to the original purchaser of the product in the county where the
original purchase was made.
18
Need help? Call 1-800-620-2790 (U.S. and Canada)
What does the warranty not cover?
This warranty does not cover:
Customer instruction/education
•Installation
•Set up adjustments
•Cosmetic damage
Damage due to weather, lightning, and other acts of God, such as power
surges
Accidental damage
•Misuse
•Abuse
•Negligence
Commercial purposes/use, including but not limited to use in a place of
business or in communal areas of a multiple dwelling condominium or
apartment complex, or otherwise used in a place of other than a private
home.
Unauthorized modification of any part of the Product, including the
antenna
Display panel damaged by static (non-moving) images applied for
lengthy periods (burn-in).
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage or power supply
Attempted repair by any person not authorized by Rocketfish to service
the Product
Products sold “as is or “with all faults”
Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)
Products where the factory applied serial number has been altered or
removed
Loss or Theft of this product or any part of the product
Display panels containing up to three (3) pixel failures (dots that are dark
or incorrectly illuminated) grouped in an area smaller than one tenth
(1/10) of the display size or up to five (5) pixel failures throughout the
display. (Pixel based displays may contain a limited number of pixels that
may not function normally.)
Failures or Damage caused by any contact including but not limited to
liquids, gels or pastes.
19
Need help? Call 1-800-620-2790 (U.S. and Canada)
TV WALL MOUNT RF-TVMLPT03V3
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE
REMEDY FOR BREACH OF WARRANTY. ROCKETFISH SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST
DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS.
ROCKETFISH PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO
THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF AND CONDITIONS
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN
DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES,
WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME
STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE
OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Rocketfish:
1-800 620-2790
www.rocketfishproducts.com
Rocketfish is a trademark of Best Buy and its affiliated companies.
*Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2018 Best Buy. All rights reserved.
Made in China
V1 ENGLISH
18-0107
www.rocketfishproducts.com
1-800-620-2790 (U.S. and Canada)
ROCKETFISH is a trademark of Best Buy and its affiliated companies.
Registered in some countries. Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2018 Best Buy. All rights reserved.
Made in China
Part # 6907-302010
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

RocketFish RF-TVMLPT03V3 User manual

Category
Flat panel wall mounts
Type
User manual
This manual is also suitable for

RocketFish RF-TVMLPT03V3 is a TV wall mount designed to securely mount your TV to a wood stud or concrete wall. It has a weight capacity of 130 lbs. (58.9 kg) and can accommodate TVs with screen sizes ranging from 32 to 70 inches diagonally. The mount is easy to install and comes with all the necessary hardware. It also features a built-in level to ensure that your TV is mounted straight.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages