Giani Kuba || User manual

Giani
Brand
Giani
Model
Kuba ||
Type
User manual

This manual is also suitable for

1
Kuba Cot II (drop side)
Assembly Instructions – Please keep for future reference
KUCO
Dimensions
No. people
Assembly Time
OW #
Length: 124 cm
KUCO
Width: 58 cm
Height: 92 cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0161 480 6204 or email Info@gianiuk.co.uk
2
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed
on pages 4.
• Remove all fittings from the
plastic bags and separate
them into their groups.
• Keep children and animals
away from the work area,
small parts could choke if
swallowed.
• Make sure you have enough
space to lay out the parts
before starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft, level
surface to avoid damaging the
unit or your floor.
• We do not recommend the
use of power
drill/drivers for
inserting
screws, as this
could damage
the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
Care and Maintenance
• Only clean using a damp cloth and
mild detergent, do not use bleach
or abrasive cleaners.
• From time to time check that there
are no loose screws on this unit.
• This product should not be
discarded with household waste.
Take to your local
authority waste
disposal centre.
This product is designed and manufactured by Drewex®.
For further information please visit http://www.drewex.com/en/
If you have damaged or missing components, email info@gianiuk.co.uk
If you are unhappy with the product and wish to return it,
please follow the retailer’s returns procedure.
3
Exploded View
If you have damaged or missing components
email [email protected]
4
Components - Panels
Please check that you have all the components listed below before constructing your item.
Part No
Description
Qty
Size
(mm)
Thickness
(mm)
A
Foot
board
1
920 x 580
20 mm
B
Head
board
1
920 x 580
20 mm
C
Side Rail
1
1200 x 630
20 mm
D
Drop side Rail
1
1200 x 630
20 mm
E
Mattress Platform
1
1195 x 575
37 mm
Components - Fixings
Please check that you have all the components listed below before constructing your item.
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
(a)
Joint connector bolt
60mm
4 pcs
(b)
Cross Dowel nut
15mm
4 pcs
(c)
Joint connector bolt
50mm
6 pcs
(d)
Joint connector
bolt (for anchor)
40mm
4 pcs
(e)
Washers
4 pcs
(f)
Anchor Bolt
50mm
4 pcs
(g)
Allen Key
1 pcs
(h)
Drop side rail bars
2 pcs
(i)
Drop side clip
2 pcs
(j)
Rod anchor top
2 pcs
(k)
Rod anchor bottom
2 pcs
(l)
Rod anchor
middle
2 pcs
Tools Required
Ruler
– Use this to measure your screws (mm)
If you have damaged or missing components
email [email protected]
5
Assembly Instructions
If you have damaged or missing components
email [email protected]
Step 2
Step 1
6
Assembly Instructions
If you have damaged or missing components
email [email protected]
Step 4
Step 3
7
Assembly Instructions
If you have damaged or missing components
email [email protected]
Step 6
Step 5
8
Assembly Instructions
If you have damaged or missing components
email [email protected]
Step 8
If height adjustment is
required follow steps
7 + 8 in reverse
Step 7
9
Drop Side Lock Function
If you have damaged or missing components
email [email protected]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Giani Kuba || User manual

Giani
Brand
Giani
Model
Kuba ||
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents