Panasonic WV-CU161C User manual

Type
User manual

Panasonic WV-CU161C is a system controller that enables remote control of various functions for the WV-CS850A Series dome cameras. With this device, you can control up to 64 preset positions, pan and tilt the camera, zoom and focus the lens, and adjust the iris. Additionally, you can control the wiper and defroster functions of the camera housing, and activate or deactivate the alarm input and output. The WV-CU161C also allows you to upload and download camera preset data, making it easy to configure multiple cameras with the same settings.

Panasonic WV-CU161C is a system controller that enables remote control of various functions for the WV-CS850A Series dome cameras. With this device, you can control up to 64 preset positions, pan and tilt the camera, zoom and focus the lens, and adjust the iris. Additionally, you can control the wiper and defroster functions of the camera housing, and activate or deactivate the alarm input and output. The WV-CU161C also allows you to upload and download camera preset data, making it easy to configure multiple cameras with the same settings.

System Controller
WV-CU161C
Closed Circuit Video Equipment
Panasonic introduces the WV-CU161C system controller.
When combined with the WV-CS850A Series new Super
Dynamic II Colour Dome Camera, the WV-CU161C enables
remote control of various functions for the WV-CS850A
Series. The WV-CS850A Series is a highly advanced and
unitized device. Features include 64 preset positions, 300
degree/sec. panning, 360 degree endless panning, 22x zoom
and 10x electronic zoom lens. Other features include Patrol
Learn Function, colour or selectable B/W mode and
progressive digital functions. WV-CU161C allows for direct
and accurate control of the WV-CS850A Series with user-
friendly operation. The WV-CU161C can control WV-
CS850A Series up to 1,200 m using RG-6/U (5C-2V).
With an Alarm input/output function and Alarm reset
input/output function, WV-CU161C can transfer an alarm
signal to an external equipment, such as motion detector.
The WV-CU161C is an integral part of any high
performance surveillance system.
CONTROLS PRESET POSITION, PAN/TILT, ZOOM/FOCUS,
DIGITAL CAMERA FUNCTIONS AND RECEIVER/HOUSING.
An Example of Setup Menu
Key Features
Preset Control : 64 positions function, focus, zoom ratio,
rotation mode, etc.
Lens control : zoom ratio, focus, iris
Pan/tilt control : manual pan, manual tilt, auto-pan
Receiver control : wiper, defroster, AUX 1-2
Camera control : home position, camera setting, patrol function
Preset control interlocked to alarm signal
Built-in alarm recover input/reset output
Built-in RS-485 terminal
Built-in joystick positioner
Preset data : up/download
function, maximum 8 cameras
Power Source 220 - 240 V AC 50 Hz
Power Consumption 7 W
Camera Input Composite Video Signal 1.0 V[p-p] / 75
Alarm Input Max. 4 input
Video Output Composite Video Signal 1.0 V[p-p] / 75, multiplexed video and control data
Alarm Output Open Collector Output 16 V DC, 100 mA max.
RS-485 Terminal RS-485, full (4 line) or half (2 line) switchable
Lens Control Zoom Tele / Wide (Electronic zoom WV-CS850A Series only)
Focus Near / Far / Auto Focus
Iris Open / Close / Reset
Pan / Tilt Control Manual Selectable at variable speed control
Auto Pan On / Off
Housing Control Wiper On / Off
Defroster On / Off
AUX 1.2 On / Off
Camera Control Position Select Selectable 1 to 64 (max.)
Home Position Possible
Camera Setup Possible
Patrol Learn Function Available on WV-CS850A Series only
B/W, Colour Mode Selectable on WV-CS850A Series only
Memory
Camera Preset Data Upload / Download (Max. 8 cameras)
Alarm Alarm Buzzer On / Off
Alarm Display On / Off
Auto Reset / Manual Reset
Possible
Alarm Suspend Possible
Ambient Operating Temperature –10°C - +50°C
Ambient Operating Humidity Less than 90%
Dimensions (W) x (H) x (D) 330 x 74.5 x 221 mm
Weights (approx.) 2.4 kg
System Controller WV-CU C
1 2 3
4 6
7 8 9
0
5
SHIFT
OPERATE ALARM
RESET
SLOW
SUSPEND
CAMERA
SETUP
PATROL
PLAY
PROGRAM
PRESET
CAMERA
FUNCTION
SETUP
ESC
HOME
SET
PRESET WIDE TELE
NEAR
AUX1
B/W
AUTO
PATROL STOP PATROL LEARN
WIPER
AUX2
DEF
UP
DOWN
RL
FAR
FOCUS
IRIS
ZOOM
CLOSS OPEN
PROGRAM
ALARM
IRIS RESET
AUTO FOCUS
Operate indicator
Alarm indicator
Joystick Controller
Patrol Play/Patrol Learn button
Defroster/Auxiliary 2 button
Auto Panning/Black and White
Selectable/Patrol Stop button
Wiper/Auxiliary 1 button
Focus buttons
Zoom/Iris buttons
Numeric buttons
Preset/Set/Program Preset button
Home/Escape button
Shift button
Slow/Camera
Function button
Camera Setup/Setup/
Program button
Alarm Reset/
Suspend button
POWER
OFF
SIGNAL GND
ON
CAMERA
IN
VIDEO
OUT
RS485ALARM DATA
TERM
RESET OUT
ARARM IN
RECOVER IN
ALARM OUT
ALARM IN
LINE
COAX
RS485
4
2
ON
OFF
12G34
RT ABABG
Alarm Input Terminal
Alarm Output Terminal
Ground
Terminal
Recover Input Terminal
Reset Output Terminal
Alarm Switch
RS485 Terminal Termination Switch
Line Selection Switch
Signal Ground
Terminal
Power Switch
Power Cord
Camera Input Connector
Video Output Connector
Data Selection Switch
107.5
72 2.5
221
177
330
300
System Controller WV-CU C
123
4 6
789
0
5
SHIFT
OPERATE ALARM
RESET
RESET
SUSPEND
CAMERA
SETUP
PATROL
PAY
PROGRAM
PRESET
CAMERA
FUNCTION
SERUP
ESC
HOME
SET
PRESET WIDE TELE
NEAR
AUX1
B/W
AUTO
WIPER
AUX2
DEF
UP
DOWN
RL
FAR
FOCUS
IRIS
CLOSS OPEN
PROGRAM
ALARM
IRIS RESET
AUTO FOCUS
SPECIFICATIONS
APPEARANCE
Unit : mm
Sensor Alarm
Digital Disk Recorder
WJ-HD100
Colour
Monitor
WV-CS850A
Series
WV-CS850A
Series
Video Switcher
WJ-SW208
Camera Housing
Camera
Receiver
System Controller
WV-CU161C
System Controller
WV-CU161C
Digital Disk Recorder
WJ-HD100
Colour
Monitor
System Controller WV-CU C
123
4 6
789
0
5
SHIFT
OPERATE ALARM
RESET
RESET
SUSPEND
CAMERA
SETUP
PATROL
PLAY
PROGRAM
PRESET
CAMERA
FUNCTION
SETUP
ESC
HOME
SET
PRESET WIDE TELE
NEAR
AUX1
B/W
AUTO
WIPER
AUX2
DEF
UP
DOWN
RL
FAR
FOCUS
IRIS
CLOSS OPEN
PROGRAM
ALARM
AUTO FOCUS
IRIS RESET
System Controller WV-CU C
1 2 3
4 6
7 8 9
0
5
SHIFT
OPERATE ALARM
RESET
RESET
SUSPEND
CAMERA
SETUP
PATROL
PLAY
PROGRAM
PRESET
CAMERA
FUNCTION
SETUP
ESC
HOME
SET
PRESET WIDE TELE
NEAR
AUX1
B/W
AUTO
WIPER
AUX2
DEF
UP
DOWN
RL
FAR
FOCUS
IRIS
CLOSS OPEN
PROGRAM
ALARM
AUTO FOCUS
IRIS RESET
SYSTEM EXAMPLESMAJOR OPERATING CONTROLS
Basic Connection
Application Connection with the Passive Video Switcher
OPTIONAL COMPONENTS & ACCESSORIES
Receiver Rack Mount Angle
WV-RC100 / WV-RC150 / WV-RC170 WV-Q62
Super Dynamic II Dome Cameras
WV-CS850A Series
64-position presettable
Digital motion detector
Electronic sensitivity up
Automatic focus
Max. 300 / second panning
Privacy zone masking
Patrol learn function
B/W, colour mode selectable
22x zoom / 10x electronic zoom
• Weights and dimensions are approximate. • Specifications are subject to change without notice. • These products may be subject to export control regulations.
DISTRIBUTED BY:
Panasonic is the brandname of Matsushita Electric.
Printed in Japan
WV-JKCU161CT(2N-662B)
PAL
  • Page 1 1
  • Page 2 2

Panasonic WV-CU161C User manual

Type
User manual

Panasonic WV-CU161C is a system controller that enables remote control of various functions for the WV-CS850A Series dome cameras. With this device, you can control up to 64 preset positions, pan and tilt the camera, zoom and focus the lens, and adjust the iris. Additionally, you can control the wiper and defroster functions of the camera housing, and activate or deactivate the alarm input and output. The WV-CU161C also allows you to upload and download camera preset data, making it easy to configure multiple cameras with the same settings.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI