StarTech.com ET90110ST2, ET90110SC2 User manual

  • Hello! I am an AI chatbot trained to assist you with the StarTech.com ET90110ST2 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 01/20/2012
For the most up-to-date information, please visit: www.startech.com
ET90110SC2 / ET90110ST2
10/100 Mbps Ethernet to Multi Mode SC/ST Fiber Media Converter - 2 km
Packaging Contents
• 1xFiberMediaConverter
• 1xUniversalPowerAdapter
• 3xPowerAdapterPlug(NA/UK/EU)
• 1xInstructionManual
System Requirements
• 10BASE-Tor100Base-TXcompatibleEthernetnetworkequipment
• RJ45terminatedUTPCat5orbetterEthernetcable
• 100BASE-FXcompatibleberopticnetworkequipment
• SCorSTterminatedmultimodeberopticcable
• AvailableACelectricaloutlet
Installation
1. MakesuretheDIPswitchesaresetappropriatelyforyournetwork
conguration(see“DIPSwitchSettings“sectionfordetails).
2. Connecttheberopticnetworkcablefromacomputer/switch/
mediaconvertertotheSC/STconnectoronthemediaconverter.
NOTE: Whenconnectingthebercable,makesuretoconnecttheTx
(transmit)terminalononeend,withtheRx(receive)terminalonthe
otherend.
3. ConnectaUTPEthernetcable,fromacomputer/switchtothe
RJ45jackonthemediaconverter.
4. Connectthepoweradaptertothemediaconverter.
5. Thefollowingexampleillustratestheconnectionschemewhen
connectingfroma10BASE-Tor100BASE-TXEthernetportofa
hub/switchtoa100BASE-FXportofanotherhub/switch,through
thebermediaconverter:
6. Thefollowingexampleillustratestheconnectionschemewhen
connectingfroma100BASE-TXEthernetportonahub/switchtoa
100BASE-TXEthernetNetworkInterfaceCard(NIC)inacomputer
throughthebermediaconverter:
ET90110SC2
ET90110ST2
*actual product may vary from photos
RJ45 Ethernet
connector
SC Duplex ber
connector
DIP Switches LED indicators Card Release
Thumbscrew
DIP Switches LED indicators Card Release
Thumbscrew
RJ45 Ethernet
connector
SC Duplex ber
connector
DC Power connector
Ground Point (optional)
Rear View (ET90110SC2/ET90110ST2)
FCC Compliance Statement
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainst
harmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycause
harmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioor
televisionreception,whichcanbedeterminedbyturningtheequipmentoandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthereceiverisconnected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com.WheretheyoccurthesereferencesareforillustrativepurposesonlyanddonotrepresentanendorsementofaproductorservicebyStarTech.com,oranendorsementoftheproduct(s)
towhichthismanualappliesbythethird-partycompanyinquestion.Regardlessofanydirectacknowledgementelsewhereinthebodyofthisdocument,StarTech.comherebyacknowledgesthatall
trademarks,registeredtrademarks,servicemarks,andotherprotectednamesand/orsymbolscontainedinthismanualandrelateddocumentsarethepropertyoftheirrespectiveholders.
Technical Support
StarTech.comslifetimetechnicalsupportisanintegralpartofourcommitmenttoprovideindustry-leadingsolutions.Ifyoueverneedhelpwithyourproduct,visitwww.startech.com/supportandaccess
ourcomprehensiveselectionofonlinetools,documentation,anddownloads.
Forthelatestdrivers/software,pleasevisitwww.startech.com/downloads
Warranty Information
Thisproductisbackedbyatwoyearwarranty.
Inaddition,StarTech.comwarrantsitsproductsagainstdefectsinmaterialsandworkmanshipfortheperiodsnoted,followingtheinitialdateofpurchase.Duringthisperiod,theproductsmaybereturned
forrepair,orreplacementwithequivalentproductsatourdiscretion.Thewarrantycoverspartsandlaborcostsonly.StarTech.comdoesnotwarrantitsproductsfromdefectsordamagesarisingfrom
misuse,abuse,alteration,ornormalwearandtear.
Limitation of Liability
InnoeventshalltheliabilityofStarTech.comLtd.andStarTech.comUSALLP(ortheirocers,directors,employeesoragents)foranydamages(whetherdirectorindirect,special,punitive,incidental,
consequential,orotherwise),lossofprots,lossofbusiness,oranypecuniaryloss,arisingoutoforrelatedtotheuseoftheproductexceedtheactualpricepaidfortheproduct.Somestatesdonotallow
theexclusionorlimitationofincidentalorconsequentialdamages.Ifsuchlawsapply,thelimitationsorexclusionscontainedinthisstatementmaynotapplytoyou.
DIP Switch Settings
LFP:
LinkFaultPass-throughwillpassalinkfailuretotheEthernetside,
ifalinkfailureisencounteredonthebersideandviceversa.
Otherwise,theEthernetsidewillcontinuetoshownolinkfailures,
evenifthebersidehasnolink.(OFF=Notactive,On=Active)
Full/ Half:
EthernetDuplexmodewillbeconguredforFullorHalf.
10/ 100:
SettheEthernetsidelinkspeedto10or100Mbps.
Auto/Manual:
AutonegotiateLinkSpeedandDuplexmodeormanuallysetvia
DIPswitches.
Specications
ET90110SC2 ET90110ST2
Supported
Standards
IEEE802.3,IEEE802.3u
Connectors
1xRJ45Ethernet
female
2xSCFiberfemale
1xDCPower
1xRJ45Ethernet
female
2xSTFiberfemale
1xDCPower
Compatible Fiber
Type
MultiMode
Optical Wavelength 1310nm
Maximum Distance 2km(1.2mi)
Duplex Modes Full/Half
Auto MDIX Yes(Ethernet)
Power Adapter
12VDC,1000mA,centerpositive,
typeMplug
Enclosure Material Metal
Operating
Temperature
0°C~60°C(32°F~140°F)
Storage
Temperature
-10°C~70°C(14°F~158°F)
Humidity 10%~90%RH
Dimensions (LxWxH) 160.0mmx95.0mmx20.0mm
Weight 600g
LED Status
LED Name Status Description
PWR Power
ON Unitispowered
OFF Unitisnotpowered
FEF FarEndFault
ON LinkFaultonfarenddevice
OFF NoLinkFaults
LNK
(FX)
FiberLink
ON Fiberlinkisdetected
OFF Fiberlinkisnotdetected
Blink Datatransmission
100
EthernetLink
Speed
ON 100Mbps
OFF 10Mbps
Full
Ethernet
DuplexMode
ON FullDuplexMode
OFF HalfDuplexMode
LNK
(TX)
EthernetLink
ON EthernetLinkdetected
OFF EthernetLinknotdetected
Blink DataTransmission
/