StarTech.com ET90110SC2 User manual

Brand: StarTech.com

Model: ET90110SC2

Category: Network media converters

Type: User manual

This manual is also suitable for

ET90110ST2

Instruction Manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 01/20/2012

For the most up-to-date information, please visit: www.startech.com

ET90110SC2 / ET90110ST2

10/100 Mbps Ethernet to Multi Mode SC/ST Fiber Media Converter - 2 km

Packaging Contents

• 1xFiberMediaConverter

• 1xUniversalPowerAdapter

• 3xPowerAdapterPlug(NA/UK/EU)

• 1xInstructionManual

System Requirements

• 10BASE-Tor100Base-TXcompatibleEthernetnetworkequipment

• RJ45terminatedUTPCat5orbetterEthernetcable

• 100BASE-FXcompatibleberopticnetworkequipment

• SCorSTterminatedmultimodeberopticcable

• AvailableACelectricaloutlet

Installation

1. MakesuretheDIPswitchesaresetappropriatelyforyournetwork

conguration(see“DIPSwitchSettings“sectionfordetails).

2. Connecttheberopticnetworkcablefromacomputer/switch/

mediaconvertertotheSC/STconnectoronthemediaconverter.

NOTE: Whenconnectingthebercable,makesuretoconnecttheTx

(transmit)terminalononeend,withtheRx(receive)terminalonthe

otherend.

3. ConnectaUTPEthernetcable,fromacomputer/switchtothe

RJ45jackonthemediaconverter.

4. Connectthepoweradaptertothemediaconverter.

5. Thefollowingexampleillustratestheconnectionschemewhen

connectingfroma10BASE-Tor100BASE-TXEthernetportofa

hub/switchtoa100BASE-FXportofanotherhub/switch,through

thebermediaconverter:

6. Thefollowingexampleillustratestheconnectionschemewhen

connectingfroma100BASE-TXEthernetportonahub/switchtoa

100BASE-TXEthernetNetworkInterfaceCard(NIC)inacomputer

throughthebermediaconverter:

ET90110SC2

ET90110ST2

*actual product may vary from photos

RJ45 Ethernet

connector

SC Duplex ber

connector

DIP Switches LED indicators Card Release

Thumbscrew

DIP Switches LED indicators Card Release

Thumbscrew

RJ45 Ethernet

connector

SC Duplex ber

connector

DC Power connector

Ground Point (optional)

Rear View (ET90110SC2/ET90110ST2)

FCC Compliance Statement

ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainst

harmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycause

harmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioor

televisionreception,whichcanbedeterminedbyturningtheequipmentoandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandreceiver.

• Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthereceiverisconnected.

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com.WheretheyoccurthesereferencesareforillustrativepurposesonlyanddonotrepresentanendorsementofaproductorservicebyStarTech.com,oranendorsementoftheproduct(s)

towhichthismanualappliesbythethird-partycompanyinquestion.Regardlessofanydirectacknowledgementelsewhereinthebodyofthisdocument,StarTech.comherebyacknowledgesthatall

trademarks,registeredtrademarks,servicemarks,andotherprotectednamesand/orsymbolscontainedinthismanualandrelateddocumentsarethepropertyoftheirrespectiveholders.

Technical Support

StarTech.com’slifetimetechnicalsupportisanintegralpartofourcommitmenttoprovideindustry-leadingsolutions.Ifyoueverneedhelpwithyourproduct,visitwww.startech.com/supportandaccess

ourcomprehensiveselectionofonlinetools,documentation,anddownloads.

Forthelatestdrivers/software,pleasevisitwww.startech.com/downloads

Warranty Information

Thisproductisbackedbyatwoyearwarranty.

Inaddition,StarTech.comwarrantsitsproductsagainstdefectsinmaterialsandworkmanshipfortheperiodsnoted,followingtheinitialdateofpurchase.Duringthisperiod,theproductsmaybereturned

forrepair,orreplacementwithequivalentproductsatourdiscretion.Thewarrantycoverspartsandlaborcostsonly.StarTech.comdoesnotwarrantitsproductsfromdefectsordamagesarisingfrom

misuse,abuse,alteration,ornormalwearandtear.

Limitation of Liability

InnoeventshalltheliabilityofStarTech.comLtd.andStarTech.comUSALLP(ortheirocers,directors,employeesoragents)foranydamages(whetherdirectorindirect,special,punitive,incidental,

consequential,orotherwise),lossofprots,lossofbusiness,oranypecuniaryloss,arisingoutoforrelatedtotheuseoftheproductexceedtheactualpricepaidfortheproduct.Somestatesdonotallow

theexclusionorlimitationofincidentalorconsequentialdamages.Ifsuchlawsapply,thelimitationsorexclusionscontainedinthisstatementmaynotapplytoyou.

DIP Switch Settings

LFP:

LinkFaultPass-throughwillpassalinkfailuretotheEthernetside,

ifalinkfailureisencounteredonthebersideandviceversa.

Otherwise,theEthernetsidewillcontinuetoshownolinkfailures,

evenifthebersidehasnolink.(OFF=Notactive,On=Active)

Full/ Half:

EthernetDuplexmodewillbeconguredforFullorHalf.

10/ 100:

SettheEthernetsidelinkspeedto10or100Mbps.

Auto/Manual:

AutonegotiateLinkSpeedandDuplexmodeormanuallysetvia