Luxpro LP200 User manual

Luxpro
Brand
Luxpro
Model
LP200
Category
Flashlights
Type
User manual
Small Pocket Light
LP200
USER MANUAL
Operation Instructions
The LP200 has a Limited 30-Day Warranty Against Manufacturer’s
Defects from time of purchase.
For warranty claims please contact us by calling 801-553-8886 or
sending an email to info@simpleproducts.com
Product Warranty
Constructed with aircraft-grade aluminum
LPE Optics
Enhanced rubber grip
High quality pocket clip
Tactical on/o button
IPX4 waterproof rating
Batteries included (1 AA)
Features
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
Battery Replacement
The LP200 uses 1 AA battery.
To replace the battery, turn the tail cap counterclockwise to
remove it. Tip the light downward to slide out the single battery.
Insert a new battery (+) side rst. For best results we recommend
using brand new alkaline batteries that are the same voltage and
brand. Re-attach the tail cap by pressing down lightly and turning
it clockwise until tight.
If you know it will be a while between uses, we suggest removing
the batteries from the ashlight and storing it in a dry, protected
place.
On/O: Press and release the button on the tail cap to turn the
light on and o.
Cycle Modes: First turn the light on by pressing down the button
on the tail cap completely and releasing. Half-press to cycle
through the modes (High/Low/Strobe). Turning the ashlight on
and o quicky and repeatedly will also cycle the light through the
three modes.
The light will automatically reset to High mode when o for
longer than 2 seconds.
Strobe
High
ANSI/PLATO FL1 STANDARD
100 lm
100 lm
LUMENSMODES
-
1h 30m
RUN TIME
-
55 m
Low 40lm 2h 30m 25 m
BEAM
DISTANCE
  • Page 1 1

Luxpro LP200 User manual

Luxpro
Brand
Luxpro
Model
LP200
Category
Flashlights
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents