2. ALLEGION
  3. RC-04 ISONAS Reader Controll

ALLEGION RC-04 ISONAS Reader Controll User guide

  • I have reviewed the wiring diagram for the ISONAS PureIP RC-04 Access Controller. The document provides detailed instructions on how to connect the device to a PoE switch, electric strike, and other components. I'm ready to answer your questions about the wiring process and device features.
  • What should be done with unused wires?
    Is the external REX device required?
    Do I need to remove factory jumper wire?
Black
Orange
Yellow
Red
White
Blue
Green
Brown
Cat5e/6 to PoE Switch
4750 Walnut Street Suite 110
Boulder, CO 80301
www.isonas.com
Date:
12/13/2016
Drawn By:
Jason R Clement
Version:
1.00.01
Dwg No: Sheet
1
of
1
PureIP RC-04 with PoE IN/OUT Using EDK
and Electric Strike
Isolate and insulate
wires not used
NC Door
Contact
04-EDK-ST-INOUT
TAN
PNK
BLK
RE D
NO
NC
COM
GN D
V+
Remove factory jumper wire
from V+ to COM!
Black
Orang e
Yellow
Red
White
Blue
Green
Brown
Isolate and insulate
wires not used
12 VDC
Electric Strike
Optional NO
REX Device for
Life Safety
Optional Egress Device if
Needed, Check With the AHJ or
Local/Federal Codes
BackEMF Diode Assembly
(install close to strike)
Cat5e/6 to PoE Switch
RC-04 on Exterior
or Unsecure Side
RC-04 on Interior
or secure Side
/