THORLABS LPC01 Operating instructions
- Category
- Car kits
- Type
- Operating instructions
Information Leaflet
INF0158T Issue C Aug 2018
LPC01 Track Joining Kit - Fitting Instructions
This leaflet details how to use the LPC01 track joining kit to join a custom rail arrangement of the Thorlabs Curtain system.
For the continuing safety of the operators of the equipment and for the protection of the equipment itself, the operator should
take note of the Warnings, Cautions and Notes throughout this leaflet, and, where applicable, in any associated literature.
1.1 Assembly
1.1.1 Parts Included
Fig. 1.1 Joining Kit Parts List
1.1.2 Joining the Curtain Rail
1) Lay the parts on the floor, or other suitable large, flat surface roughly in the positions shown in Fig. 1.2.
2) Insert the two spring pins (D) into the joint as shown below. Push in each pin up to the indent mark, such that about half its
length is protruding.
3) Using the M6 x 16 countersunk bolts (A) and joint plates (B and C) provided, assemble the curtain rail as shown below. .
Fig. 1.2 Joining the Curtain Rail
M6 x 16 Countersunk Bolt (qty 4)
Joint Plate Top
Joint Plate Bottom
Insertion Force Locating Pins (qty 2)
A
B
C
D
Exploded view of section joint
All joints the same
Spring pins correctly inserted
up to the indent mark
www.thorlabs.com
Thorlabs Worldwide
Contacts
For technical support or sales inquiries, please visit us at www.thorlabs.com/contact for our most up-to-date contact
information.
USA, Canada, and South America
Thorlabs, Inc.
Europe
Thorlabs GmbH
France
Thorlabs SAS
Japan
Thorlabs Japan Inc.
UK and Ireland
Thorlabs Ltd.
Scandinavia
Thorlabs Sweden AB
Brazil
Thorlabs Vendas de Fotônicos Ltda.
China
Thorlabs China
-
1
-
2
THORLABS LPC01 Operating instructions
- Category
- Car kits
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
THORLABS LPCFJT Operating instructions
-
THORLABS PSY191/S Additional Instrument Shelf User manual
-
THORLABS TLV-U-FF User manual
-
THORLABS LFES1 Installation guide
-
THORLABS NRT150 User manual
-
THORLABS SLS203L User manual
-
THORLABS MDFM-TE2000 Assembly Manual
-
THORLABS ELL6(K) Multi-Position Sliders User manual
-
THORLABS GPS011-EC User manual
-
THORLABS GVS202 User manual
Other documents
-
Envision EL-10-30 Operating instructions
-
Anritsu VectorStar ME7848A-0140 Maintenance Manual
-
Corning Videodrop User manual
-
Princeton IsoPlane 81 User manual
-
Idex Zeiss Threaded Filter Cube Owner's manual
-
-
SRS LDC502 Owner's manual
-
iNO LRIS Safety Manual
-
Welch Allyn RetinaVue 100 Imager Directions For Use Manual
-
Welch Allyn RetinaVue 100 Imager Directions For Use Manual
