88711 YN ,eguappuaH truoC tobaC 521moc.elytsamixxam.www)2649-926( AMIXXAM-668 moc.elytsamixxam@ofni
Bare copper wire and
Green/Yellow Wire
Bare Copper Wire
c. Connect the Green/Yellow wire and Bare copper wire to the Bare copper wire in the
JUNCTION BOX. If the Bare copper wire is not present in the JUNCTION BOX, connect it to
the GROUND SCREW on the CROSSBAR BRACKET which must be connected to
GROUND for safety.
Amp Draw: .094 A
11.5
Smart
866-MAXXIMA (629-9462)
www.maxximastyle.com
125 Cabot Court Hauppauge, NY 11788
11.5
BlueTooth capability Instructions
When the smart light loses connection to the network, they are unable to be
switch to Bluetooth control mode. In this mode, the light can still be
controlled by a phone at a short distance via bluetooth.
Note: 1. Make sure Bluetooth is enabled on your phone.
2. Make sure the product is paired with your mobile phone on the app
3. Keep your phone connected to the internet
“Smart Life” App
“Smart Life” App
“Smart Life”
Smart Life
• Enter the Network Name & WiFi password for your home and click Next.
light’s WiFi hotspot: “Smartlife-XXXX”
• Return to the Smart Life App and wait for the connection to complete
Register an account and Login
• Open the Smart Life App, click Register to create an account
& login.
• If already registered, login.
For Amazon Alexa
• Open the Alexa app and select “Skills” from the top menu
• On the Skills page, search for Smart Life
• Enable Smart Life in the Alexa App
• Log in with your Smart Life Account (username & password)
• Discover new smart devices in the App or ask Alexa to discover new
devices
For Google Home
• Open the Google Home App and tap the “+” icon in the homepage
• Select “Set up device” in the “Add and manage” Screen
• In the “Set Up” screen, tap “New Devices” to set up new devices in your
home
• Tap “Works with Google” to authorize Google Home to work with your
Smart Life account
You may also share all devices in your account with another
account
Go to “Me” at the bottom of the App
Select “Home Management”
Select the Home you wish to share with
Select “Add Member”. You can send the invite via your Smart Life
account, Message, or Email. New Members must have or create a
Smart Life account via the Smart Life App
controlled by the app. After 3-5 minutes, the smart lights will automatically
the On position. If not, turn on.
• Please check whether the light is connected with power, and your
mobile device is connected to a 2.4GHz WiFi Network.
• Check the router. If the router is dual-band, make sure to select
2.4GHz network to add the light. Router Broadcast should be set
to open. Also try disabling the 5GHz band temporarily on the
router.
• Make sure the WiFi User Name and Password are correct.
• Make sure the light is within the range of the router signal. If not,
device to make sure the signal is strong in that area or if it is weak.
• Check to see if the maximum number of devices/lights the router
can handle has been reached. If so, remove a device/light and
restart the router. If there is no Wi-Fi connection, try restarting the
light and/or restarting the router.
sequence 4 or 5 times instead of 3 times. Also give a second or 2
• If the internet signal/connection from the internet provider is
down, the light can still be controlled through the mobile device
as long as both are connected to the same Network (Intranet).
• If the internet signal/connection is down from your router, this
light has a backup bluetooth function that will allow you to
control the lights from a certain distance. Ensure bluetooth is
enabled on your device.
• For additonal troubleshooting tips, visit the webpage listed below
/
