Luvoni MEL-6150DW Installation guide

Brand: Luvoni

Model: MEL-6150DW

Type: Installation guide

88711 YN ,eguappuaH truoC tobaC 521moc.elytsamixxam.www)2649-926( AMIXXAM-668 moc.elytsamixxam@ofni

Bare copper wire and

Green/Yellow Wire

Bare Copper Wire

c. Connect the Green/Yellow wire and Bare copper wire to the Bare copper wire in the

JUNCTION BOX. If the Bare copper wire is not present in the JUNCTION BOX, connect it to

the GROUND SCREW on the CROSSBAR BRACKET which must be connected to

GROUND for safety.

Amp Draw: .094 A

11.5

Smart

[email protected]

866-MAXXIMA (629-9462)

www.maxximastyle.com

125 Cabot Court Hauppauge, NY 11788

11.5

BlueTooth capability Instructions

When the smart light loses connection to the network, they are unable to be

switch to Bluetooth control mode. In this mode, the light can still be

controlled by a phone at a short distance via bluetooth.

Note: 1. Make sure Bluetooth is enabled on your phone.

2. Make sure the product is paired with your mobile phone on the app

3. Keep your phone connected to the internet

“Smart Life” App

“Smart Life”

Smart Life

• Enter the Network Name & WiFi password for your home and click Next.

light’s WiFi hotspot: “Smartlife-XXXX”

• Return to the Smart Life App and wait for the connection to complete

• Open the Smart Life App, click Register to create an account

& login.

• If already registered, login.

For Amazon Alexa

• Open the Alexa app and select “Skills” from the top menu

• On the Skills page, search for Smart Life

• Enable Smart Life in the Alexa App

• Log in with your Smart Life Account (username & password)

• Discover new smart devices in the App or ask Alexa to discover new

devices

For Google Home

• Open the Google Home App and tap the “+” icon in the homepage

• Select “Set up device” in the “Add and manage” Screen

• In the “Set Up” screen, tap “New Devices” to set up new devices in your

home

• Tap “Works with Google” to authorize Google Home to work with your

Smart Life account

You may also share all devices in your account with another

account

Go to “Me” at the bottom of the App

Select “Home Management”

Select the Home you wish to share with

Select “Add Member”. You can send the invite via your Smart Life

account, Message, or Email. New Members must have or create a

Smart Life account via the Smart Life App

controlled by the app. After 3-5 minutes, the smart lights will automatically

the On position. If not, turn on.

• Please check whether the light is connected with power, and your

mobile device is connected to a 2.4GHz WiFi Network.

• Check the router. If the router is dual-band, make sure to select

2.4GHz network to add the light. Router Broadcast should be set

to open. Also try disabling the 5GHz band temporarily on the

router.

• Make sure the WiFi User Name and Password are correct.

• Make sure the light is within the range of the router signal. If not,

device to make sure the signal is strong in that area or if it is weak.

• Check to see if the maximum number of devices/lights the router

can handle has been reached. If so, remove a device/light and

restart the router. If there is no Wi-Fi connection, try restarting the

light and/or restarting the router.

sequence 4 or 5 times instead of 3 times. Also give a second or 2

• If the internet signal/connection from the internet provider is

down, the light can still be controlled through the mobile device

as long as both are connected to the same Network (Intranet).

• If the internet signal/connection is down from your router, this

light has a backup bluetooth function that will allow you to

control the lights from a certain distance. Ensure bluetooth is

enabled on your device.

• For additonal troubleshooting tips, visit the webpage listed below

Luvoni MEL-6150DW Installation guide

Brand: Luvoni

Model: MEL-6150DW

Type: Installation guide

Download PDF

report

Luvoni MEL-6150DW Installation guide

Luvoni MEL-6150DW Installation guide

Other documents