Comsol PBF10XX User manual

  • Hello! I'm a chat assistant, and I have reviewed the user manual for the comsol PBF10XX power bank. This document details the features of this 10000mAh dual port power bank, such as its dual USB ports, smart power chip, and digital LED display. I'm ready to answer any questions you may have about the PBF10XX and its usage based on the information provided in this manual.
  • How do I charge the power bank?
    How do I charge my phone or other USB device?
    How do I check the remaining capacity?
USB-A Output 2
Power On/Off
USB-A Output 1
To Charge Phone or USB Device
To Check Remaining Capacity
Important Safety InstructionsTo Charge Power Bank
Suitable for
• iPhone/iPad/iPod
• Most smartphones including Samsung, Huawei, Sony, Google,
LG, Oppo, Xiaomi, OnePlus, HTC, Moto, Nokia, Telstra & more
• Smartwatches, fitness trackers, digital cameras, portable gaming
consoles, eReaders and drones
• Bluetooth devices such as speakers, headset or earphones
Features
Battery type: Lithium-Polymer
10000mAh provides 360% extra battery for an average smartphone*
• Get an extra 24 hours of web surfing on an iPhone Xs or 20 hours
on a Samsung Galaxy S10
• Four LED’s to indicate remaining capacity
• Dual USB ports for simultaneous charging of 2 devices
• Smart Power Chip identifies your device and provides maximum
power for speedy charging times
• 2A high output for fast charging of iPad or tablet
• Rechargeable more than 500 times
• Includes 30cm USB-A to USB-C cable to charge power bank
• Built-in over charging and short circuit protection
• Watt Hour Rating: 37Wh
• USB-C Input: DC 5V 2A
• USB-A Output 1: DC 5V 2A
• USB-A Output 2: DC 5V 2A
• Total Output: 10W
• Charging Time: 6 to 7 hours depending on charger output
• Size: 135mm (L) x 69.5mm (W) x 15mm (H)
• Certifications: RCM, RoHS, UN38.3
• To charge the power bank, use the included USB-A to USB-C
cable and connect the USB-C input port on the power bank to a
USB wall charger
• During charging the digital LED display will flash to indicate
charging capacity status
• When charging is complete the digital LED display will show 100
• Press On/Off button and the digital LED display will show the
percentage remaining capacity
• The display will turn off automatically after about 30 seconds
• To maximize battery life span, fully charge power bank
before first use for 6 to 8 hours
• Store power bank in a cool and dry place.
• Do not store power bank in hot or humid environment
• Operating temperature should be between -10c to 45c
• If power bank is not used for long periods of time, you should
charge and discharge once every three months
• When charging a device, the power bank may feel warm, this
is a normal operating condition and should not be cause for
concern
• In normal conditions, the battery performance will decline
over several years
• Do not dispose of power bank in heat or fire
• Do not clean power bank with harmful chemicals or detergents
• Misuse, dropping or excessive force may cause product
damage
iPhone, iPad and iPod are trademarks of Apple Inc., registered in the U.S.
and other countries.
USB-C is a trademark of USB Implementers Forum.
Power Bank Layout
USB-C Input
Made in Chinawww.mycomsol.com.au
Model: PBF10XX
10000mAh Dual Port Power Bank
User Manual v1.2
* 360% extra battery based on an iPhone 8 with 1821mAh battery
Digital LED
• Using your phone or other USB device’s charging cable, connect
the USB-A connector to either output 1 or output 2 port on the
power bank
• Connect the other end of the cable to your device
• Charging should commence automatically
• If charging doesn’t start, press the On/Off button to start charging
• If your phone or device uses a USB-C port, then you can also use
the included cable to charge your device
• When your phone or device is fully charged, the power bank will
automatically turn itself off
/