2. Ridetech
  3. 11179400

Ridetech 11179400 Operating instructions

  • Hello! I've reviewed the installation instructions for the ridetech Tie Rod Adjuster 70-81 GM “F” Body. This document details how to replace the OEM steel sleeve, emphasizing safe installation practices such as using anti-seize compound and ensuring proper thread engagement using sight holes. I'm ready to answer your questions about this device.
  • What is the purpose of this Tie Rod Adjuster?
    How can I identify the left-hand threaded side?
    What should I use on the threads during installation?
    What is the minimum thread engagement needed for safety?
    How can I ensure proper thread engagement?
1812-482-2932
Installation
Instructions
Recommended Tools
www.ridetech.com
Part # 11179400 - 70-81 GM “F” Body Tie Rod Adjuster
Major Components .....In the box
QTY Part Number Description
2 90000138 Tie Rod Adjuster
2 99800000 11/16”-16 Right Hand Jam Nut
2 99800001 11/16”-16 Left Hand Jam Nut
NOTES:
This Tie Rod Adjuster is designed to take place of the OEM steel sleeve.
One end of the adjuster has a groove cut in it, this is the LEFT HAND threaded side.
When installing the Tie Rod Adjuster, use antisieze compound on the threads.
FOR YOUR SAFETY, THE TIE RODS NEED A MINIMUM 1 1/32” OF THREAD ENGAGEMENT INTO THE
TIE ROD ADJUSTER. USE THE SIGHT HOLES IN THE SIDE OF THE TIE ROD ADJUSTER TO ENSURE
PROPER THREAD ENGAGEMENT.
REV2 5/15/23
/