LED LENSER®*
www.ledlenser.com/SLT
V1.0
Smart Instruction Card
H14.2 | H14R.2
The Energy Modes are the selectable “basic settings” of your flashlight. You can choose between Energy Saving
Mode, which optimizes burning life, and Constant Current Mode (constant current control) with electronically
controlled, continuous light output.
MULTI-FUNCTION SWITCH
Multi-function switch
Lumens (lm)
Lumens (lm)
Energy Saving
Time (h) Time (h)
Constant Current
7x
press
CHANGE OF ENERGY MODES
8th
hold down
1 sec.
1 x 2 x 3 x
ON
ON
ON OFF
OFF
OFF
turn
on
Flashing frequency is
infinitely adjustable
(Blink to Strobe)
MULTI-FUNCTION SWITCH
PROGRAM 1 – EASY LOW
turn
Brightness is
infinitely adjustable
(Power to 5 Lumen)
FRONT SWITCH
hold
down
2 sec.
press
within 1 sec.
For more interactive training on your flashlight from LED LENSER®* please visit www.ledlenser.com/SLT
Lamp has to be switched o!
CHARGING STATUS DISPLAY (3 stages)
100-50% | 50-20% | 20-0%
CHANGE PROGRAM
The number of blinks shows
the chosen Program.
Lamp turns on.
press &
hold
5 sec.
ON/OFF
LOCK FUNCTION
PROGRAM 2 – EASY POWER
PROGRAM 3 – SIGNAL
5 s
press & hold
Additional functions of the
H14R.2 multi-function switch
REAR LIGHT press
1x ON
2x BLINK
-
1
-
2
