2. Home
  3. Lighting
  4. Flashlights
  5. Led Lenser
  6. H7R.2
H7R.2

Led Lenser H7R.2 User manual

  • Hello! I am an AI chatbot trained to assist you with the Led Lenser H7R.2 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
LED LENSER®*
www.ledlenser.com/SLT
Smart Instruction Card
H7.2 | H7R.2
V1.0
The Energy Modes are the selectable “basic settings” of your flashlight. You can choose between Energy Saving
Mode, which optimizes burning life, and Constant Current Mode (constant current control) with electronically
controlled, continuous light output.
CHANGE OF ENERGY MODES (R H7R.
2
)
Lumens (lm)
Lumens (lm)
Energy Saving
Time (h)
Time (h)
Constant Current
8x
press
Multi-function switch
9th
hold down
1 x 2 x 3 x
ON
ON
ON OFF
OFF
OFF
turn on
Flashing frequency is
infinitely adjustable
(Blink to Strobe)
MULTI-FUNCTION SWITCH
PROGRAM 1 – EASY LOW
turn
Brightness is
infinitely adjustable
(Power to 5 Lumen)
FRONT SWITCH
hold
down
2 sec.
press
within 1 sec.
For more interactive training on your flashlight from LED LENSER®* please visit www.ledlenser.com/SLT
Lamp has to be switched o!
CHARGING STATUS DISPLAY (3 stages)
100-50% | 50-20% | 20-0%
CHANGE PROGRAM
The number of blinks shows the
chosen Program.
Lamp turns on.
press &
hold
5 sec.
ON/OFF
LOCK FUNCTION
PROGRAM 2 – EASY POWER
PROGRAM 3 – SIGNAL
5 s
press & hold
H7R.
2
additional functions
REAR LIGHT
press
1x ON
2x BLINK
2 ENERGIE MODES (see back)
/