Panasonic SCALL2EB User manual

Brand: Panasonic

Model: SCALL2EB

Type: User manual

Panasonic SCALL2EB is a versatile device that can enhance your audio experience. With its ability to connect to a compatible Panasonic Home Theater Audio System, you can use it as rear surround speakers or as individual units for stereo sound. Setting up the device is made easy with two available methods: using the Panasonic Music Streaming app or manual pairing. The app allows for seamless pairing and settings adjustments, while manual pairing provides a straightforward process with clear instructions. Once paired, you can enjoy immersive surround sound or high-quality stereo audio.

RQCA2268

To set up the rear surround speakers (pairing)

Preparation: Make sure to turn SC-ALL2 and SC-ALL70T/SC-ALL30T on.

≥ The pairing mode is cancelled after about 2 minutes elapses.

≥ If the operation does not work as described above, or if pairing fails (e.g. “FAIL” appears on SC-ALL2, or “NOT COMPLETED” appears on SC-ALL70T/SC-ALL30T):

– Turn SC-ALL2 and SC-ALL70T/SC-ALL30T off and on again, and then repeat the procedure from step 1.

≥ Refer to the operating instructions for SC-ALL70T/SC-ALL30T for further information.

If you have a compatible Panasonic Home Theater Audio System (e.g. SC-ALL70T/SC-ALL30T), you can use two SC-ALL2

units as rear surround speakers to enjoy surround speaker sound.

Method 1: Pairing using the app

If SC-ALL70T/SC-ALL30T is connected to the network, you can make rear surround settings using the app

“Panasonic Music Streaming” (free of charge).

(Always use the latest version of the app.) For details on the app, refer to the site below.

http://panasonic.jp/support/global/cs/audio/app/ (This site is in English only.)

[IMPORTANT] Before use, set “REAR SPEAKER” in setup menu of SC-ALL70T/SC-ALL30T to “ON”.

Method 2: Manual pairing

SC-ALL2

SC-ALL70TSC-ALL30T

SC-ALL2SC-ALL2

Surround

(L)

Surround

(R)

 





1 2

3 4



SETUP



REAR PAIRING YES REAR1

PAIRING

PAI RE D

REAR2

PAIRING

Press

repeatedly

to select

“REAR

PAIRING”.

Touch and hold for at least 4 seconds

until [ ] on the top panel starts to

blink slowly.

Touch and hold for at

least 4 seconds until

below display appears.

Set one SC-ALL2 as left surround

speaker

Set the other SC-ALL2 as right surround speaker

≥ Before proceeding this step, do step 2 again.

“PAIRED” appears for a

while when pairing is

completed.

The indicator light goes off.

(scrolls)

Enter pairing mode for SC-ALL70T/SC-ALL30T

Prepare one of the SC-ALL2 for surround speaker setup

(Do this step before both step 3 and step 4.)

and

(L) (R)

Select

“YES”.

For left

speaker

For right

speaker

Touch and release,

and below display

appears.

Press to confirm,

and below

display appears.

Touch and release,

and below display

appears.

Touch and release,

and below display

appears.

Touch and release,

and below display

appears.

leaflet-RearSurround_SC-ALL2-RQCA2268.fm 1 ページ２０１５年８月３１日　月曜日　午後１時３１分

Panasonic SCALL2EB User manual

Panasonic SCALL2EB User manual

Panasonic SCALL2EB User manual

Related papers

Other documents