2. Playskool
  3. DREAM TOWN ROSE PETAL Cottage

Playskool DREAM TOWN ROSE PETAL Cottage, Rose Petal Cottage Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Playskool DREAM TOWN ROSE PETAL Cottage Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
A Part of the Dream Town™ Collection
™
Thanks for
purchasing the
ROSE PETAL Cottage.
Please read and
retain these
instructions.
1. Laybackpanelat
onoor.
2. Presssidepanels
intogroovesonback
panel.
3. Pressgrooveson
frontpanelontoside
panels.
4. Setupright,and
placeshelfinside
stove.
5. Placetoponstove
andpushdown
rmly.
Stove
Assembly:
Parts required
for this step:
- Stove pieces (6)
Storage
back
front
sideside
shelf
top
© 2007 Hasbro. All Rights Reserved.
TM & ® denote U.S. Trademarks.
© 2007 Worlds Apart Ltd. All rights Reserved.
AG ES 3+
68601
This Cottage meets the
ammability requirements of
CPAI-84. The fabric may burn
if left in continuous contact
with any ame source. The
application of any foreign
substance to the Cottage fabric
may render the ame resistant
properties ineective.
KEEP ALL FLAME
AND HEAT SOURCES
AWAY FROM THE
ROSE PETAL
COTTAGE FABRIC.
WARNING:
Visit
Visit
.
com
.
com
Questions? Call 1-800-PLAYSKL
PN 6686270000
Quick,simplestorage!
Adult assembly
required.
Stove front and Cottage
door contain magnets.
4 x front corner connectors (red)
Includes:
4 x back corner connectors (red)
4 x roof peak connectors (white)
8 x top corner connectors (blue)
10 x straight connectors (white)
19x White Frame Tubes
9 x
1 x
1 x
4 x
4 x
DOOR
CHIMNEY
#4
#5
2 x
#3
#6
4 x
4 x
#7
#8
#1
#2
2x Fabric Cottage Covers
30x Connectors
19x Pink Frame Tubes
5 x
#2
6x Stove Pieces
4 x
#1
12. Zipuprearwall.
9. Workyourwayaroundtheframe,
slidingeachcornerofthecover
onevenly.
7. Holdingtheroofpeakin
place,slideonesideofthe
coveroverthefrontof
theframe.
8. Holdingthepeak
inplace,move
totheotherside
oftheframe.
Slidethatside
ofthecover
overtheframe.
Do not pull the
cover all the way
onto the frame
at this time.
13. Zipupdoor.
14. Adjustwindowhook-and-loop
fastenerattachments.
15. Besuretoalignthefasteners
forwindow.
Ensure
thatthered
connectors
slidein
between
zipper
halves
alongthe
redseams.
61
Frames
Assembly:
Parts required
for this step:
- All
connectors
- All frame
tubes
#1 #1
#8
#7
#7
#8
#2 #2
#2 #2
#6 #6
#2
White
(Chimney Side Frame)
Pink
(Door Side Frame)
IMPORTANT
NOTE:
Make sure
connectors
are pushed
into the
tubes as
far as they
will go.
Assemble frames FIRST!
1. Assembleframes
asshown.
For video assembly instructions, please visit
www.playskool.com/rosepetalcottage.
Door Side
Cottage
Cover:
Parts required
for this step:
- Completed pink
frame
1. Assemblepinkframeasshownonpage2.
2. RemovetheCottagecoverfromthe
bagmarked“Door.”
3. Completelyunzipthe2zippersattherearwalland
doorframe.Separatedoorframezipperinto2halves.
Detachthefabricfasteneraroundthewindow.
4. LaytheCottagecoverout
withtheprintedsidedown.
Pulltheexteriorrearwall
awayfromtherestofthe
coveruntilitisaton
theoor.
5. Settheframeonthecover
asshown,sothatthetwo
redconnectorpieceson
theopenside
sitontopoftheredseams.
Bottomsidesofframe
shouldoverlapabout2
inchesoftheredseams.
6.Liftingfromthe
peakofthe
roof,bringthe
mainpartof
thecoverup
ontothepeak
oftheframe.
11. Startingwiththetwostrapsnearest
thepeakoftheroof,attachfabric
tabsaround
frame
tubes.
10. Pullthecoverallthewayon,
sothattheframeistucked
insidethe
zipper
pocket.
Door Side Cottage Cover:
DOOR
- Door Cottage
cover
Assembled
Outside
view
Inside
view
Note: Place
frame exactly
as shown.
#1
#5
#1
#4
#4
#5
#1
#1
#2 #3
#1
25
Assembled
Outside
view
Inside
view
12. Zipuprearwall.
13. Adjustchimneyandwindow
hook-and-loopfastener
attachments.
14. Besuretoalign
thefasteners
forchimney
andwindow.
6. Liftingfromthepeakoftheroof/
chimney,bringthemainpartofthe
coverupontothepeakoftheframe.
Do not pull the cover all the
way onto the frame at this time.
7. Holdingtheroofpeakinplace,
slideonesideofthecover
overthefrontoftheframe.
8. Holdingthepeakinplace,
movetotheothersideofthe
frame.Slidethatsideofthe
coverovertheframe.
9. Workyourwayaroundtheframe,
slidingeachcornerofthecoveron
evenly.Ensurethattheredconnectors
areslidinginalongtheredseams.
Chimney
Side Cottage
Cover:
Parts required for
this step:
- Completed white
frame
2. RemovetheCottagecoverfromthebag
marked“Chimney.”
3. Completelyunziptherearwall
fromthebodyoftheCottage,
anddetachthefabricfasteners
aroundthetwowindowsand
chimney.
4. Laythe
Cottagecover
outwiththe
printedside
down.Pullthe
exteriorrear
wallaway
fromtherest
ofthecover
untilitisat
ontheoor.
5. Settheframeonthecover
asshown,sothatthetwo
redconnectorpiecesonthe
opensidesitontopofthe
redseams.Bottomsidesof
frameshouldoverlapabout
2inchesoftheredseams.
10. Pullthecoverall
thewayon,so
thattheframeis
tuckedinside
thezipper.
11.Startingwiththetwo
strapsnearestthe
peakoftheroof,
attachfabric
tabsaround
frametubes.
1. Assemblewhiteframeasshownonpage2.
Chimney Side Cottage Cover:
- Chimney Cottage
cover
CHIMNEY
Note: Place
frame exactly
as shown.
4
3
/