2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. Computer cooling components
  6. Hardware cooling accessories
  7. Greenheck
  8. 466215 RDC-6 Duct Conversion

Greenheck 466215 RDC-6 Duct Conversion Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Greenheck 466215 RDC-6 Duct Conversion Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Assembly and Installation Instructions
Please read these instructions carefully before attempting to assemble the product described. Protect yourself and others by
observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage!
PN 466215
RDC-6 Duct Conversion
®
466215 • RDC-6 Duct Conversion, Rev. 5, September 2015 Copyright 2015 © Greenheck Fan Corp
®
Phone: (715) 359-6171 • Fax: (715) 355-2399 • E-mail: [email protected] • Website: www.greenheck.com
SP-A Box Slot
Plastic SP-
A
Duct Adapter Tabs
Insert plastic duct tab into SP-A box slots.
Plastic SP-
A
Duct Adapter (PN 473388)
Sheet Metal Screw #10x3/8
Phillips Head (PN 415838)
SP-A Box
1
Sheet Metal Screw #10x3/8
Phillips Head (PN 415838)
SP-A Box
Plastic SP-A
Duct Adapter (PN 473388)
Screw Tabs
Rotate plastic SP-A duct adapter (PN 473388)
until the screw tabs meet SP-A box.
2
Sheet Metal Screw #10x3/8
Phillips Head (PN 415838)
Screw holes
Install screws provided to secure discharge.
3
Installation of RDC-6 Round Duct Connector on SP-A 110-190
Discharge Side
Sheet Metal
Screws
Removal of Original Rectangular Outlet
Remove the four (4) sheet metal screws that hold
the duct connector to the blower box assembly
on the discharge side.
/