Greenheck 453380 RDC-8 Duct Conversion Operating instructions

Greenheck
Brand
Greenheck
Model
453380 RDC-8 Duct Conversion
Type
Operating instructions
1
453380 • RDC-8 Duct Conversion, Rev. 3, September 2008 Copyright 2008 © Greenheck Fan Corp
Installation, Operation and Maintenance Manual
Please read and save these instructions for future reference. Report any damaged equipment to the
shipper immediately. Read carefully before attempting to assemble, install, operate or maintain the
product described. Protect yourself and others by observing all safety information. Failure to comply
with instructions could result in personal injury and/or property damage!
®
PN 453380
RDC-8 - Duct Conversion
Greenheck warrants this equipment to be free from defects in material and workmanship for a period
of one year from the purchase date. Any units or parts which prove defective during the warranty
period will be replaced at our option when returned to our factory, transportation prepaid. Motors are
warranted by the motor manufacturer for a period of one year. Should motors furnished by Greenheck
prove defective during this period, they should be returned to the nearest authorized motor service
station. Greenheck will not be responsible for any removal or installation costs.
As a result of our commitment to continuous improvement, Greenheck reserves the right to change
specifications without notice.
Greenheck Catalogs for inline fans provides additional information describing the
equipment, fan performance, available accessories, and specication data.
®
Phone: (715) 359-6171 • Fax: (715) 355-2399 • E-mail: [email protected] • Website: www.greenheck.com
Warranty
AMCA Publication 410-96, Safety Practices for Users and Installers of Industrial
and Commercial Fans, provides additional safety information. This publication can
be obtained from AMCA International, Inc. at: www.amca.org.
Removal of Original Rectangular Outlet:
1. Remove the four (4) sheet metal screws that hold
the duct connector to the blower box assembly
on the discharge side. Refer to Figure 1.
Attachment of New Round Outlet:
2. Attach the round duct connector to the blower
box assembly using the four (4) original sheet
metal screws. Refer to Figure 2.
BROWN
07/25/2008
1/1
Figure 1 Figure 2
Discharge Side
Discharge Side
Sheet
Metal
Screws
Sheet
Metal
Screws
BROWN
07/25/2008
1/1
  • Page 1 1

Greenheck 453380 RDC-8 Duct Conversion Operating instructions

Greenheck
Brand
Greenheck
Model
453380 RDC-8 Duct Conversion
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents