DT Research GC500 Basic Operation Guide

DT Research
Brand
DT Research
Model
GC500
Type
Basic Operation Guide

DT Research GC500

DT Research GC500 is a charging cabinet designed to charge DT311 and DT315 series Mobile Tablets. It can charge up to five tablets simultaneously, making it suitable for use in schools, offices, or other environments where multiple tablets need to be charged and stored securely. The cabinet has an internal fan for cooling and a simple locking connection for the tablets. It also comes with a single wall plug solution for convenient charging and storage. Additionally, multiple GC500 System Charging Cabinets can be stacked together with a locking mechanism for stability.

DT Research GC500

DT Research GC500 is a charging cabinet designed to charge DT311 and DT315 series Mobile Tablets. It can charge up to five tablets simultaneously, making it suitable for use in schools, offices, or other environments where multiple tablets need to be charged and stored securely. The cabinet has an internal fan for cooling and a simple locking connection for the tablets. It also comes with a single wall plug solution for convenient charging and storage. Additionally, multiple GC500 System Charging Cabinets can be stacked together with a locking mechanism for stability.

BASIC OPERATION GUIDE
GC500 Charging Cabinet
INTRODUCTION
The GC500 Charging Cabinet (ACC-500-311/ ACC-500-315) provides efficient
charging for up to ve (5) of the DT311 and DT315 series Mobile Tablets. The
Cabinet has an internal fan for system cooling, and the basic package includes one
charging cabinet and one power cord. With the simple locking connecon for the
DT311 and DT315 tablets, the GC500 Charging Cabinet provides convenient tablet
charging and storage with a single wall plug soluon.
To charge a DT Research Tablet
(DT311 or DT315 series), open the front door
and pull one of the system trays out from the
Cabinet. Place the Tablet in the tray with the
tablet facing up and the boom of the tablet
facing the back of the cabinet, and then push
the tray back into the Cabinet. The pins on the
boom of the tablet should line up with the
pins at the back of the cabinet. Repeat this
step for charging up to ve (5) tablets.
Several GC500 System Charging Cabinets can be stacked together with a locking
mechanism to x the systems in place for stability.
* NOTE: Before powering on the GC500 Charging Cabinet, plug the power cord into the
GC500 and insert the other end into a power outlet.
Precauons
1. Always exercise care when operang and handling the GC500 and DT Research
Tablets.
2. Do not disassemble any poron of the charger and adapter, as this will void any
product warranty.
3. Do not use any power adapter other than the one provided with the GC500
Charging Cabinet or acquired from the manufacturer or its partners.
4. In the unlikely event that abnormal noise, strange odor, or smoke is present,
immediately disconnect all power sources. Please report the problem to your
device provider immediately.
Specificaons
Package Contents:
1. One GC500 Charging Cabinet
2. One power cord
3. Basic operaon guide
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 hp://www.dtresearch.com
Copyright © 2015, DT Research, Inc. All Rights Reserved.
BOG 101915 GC500ENG
System
Tablet Models Supported
Up to ve (5) DT311, DT315, or DT395BV series
Cooling
Two (2) fans with automac on/o control
Control Switch
One (1) RJ45 Ethernet connector for remote tablet management
I/O Ports
LAN
One (1) RJ45 Ethernet connector for remote tablet management
AC-in
One (1) IEC connecter (Male)
Mechanical and Environmental
Power Supply
100 – 240V AC; 10A/5A @ 50/60Hz
Enclosure
ABS + PC plascs, aluminum, and steel
Regulatory
FCC Class B, CE, RoHS compliant
Dimensions (H x W x D)
449 x 398 x 405 mm
Weigh
22 kg
Temperature
Operaon: 0°C – 35°C; Storage: -20°C – 60°C
Humidity
0% – 90% non-condensing
* Specicaons subject to change without noce.
  • Page 1 1
  • Page 2 2

DT Research GC500 Basic Operation Guide

DT Research
Brand
DT Research
Model
GC500
Type
Basic Operation Guide

DT Research GC500

DT Research GC500 is a charging cabinet designed to charge DT311 and DT315 series Mobile Tablets. It can charge up to five tablets simultaneously, making it suitable for use in schools, offices, or other environments where multiple tablets need to be charged and stored securely. The cabinet has an internal fan for cooling and a simple locking connection for the tablets. It also comes with a single wall plug solution for convenient charging and storage. Additionally, multiple GC500 System Charging Cabinets can be stacked together with a locking mechanism for stability.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents