ALED150HS INSTALLATION INSTRUCTION
ALED150HS INSTALLATION INSTRUCTION
Thank you for buying RAB lighting xtures. Our goal is to design the best quality products to get the
job done right. We’d like to hear your comments. Call the Marketing Department at 888-RAB-1000,
or email: marketing@rabweb.com
Thank you for buying RAB lighting xtures. Our goal is to design the best quality products to get the
job done right. We’d like to hear your comments. Call the Marketing Department at 888-RAB-1000,
or email: marketing@rabweb.com
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
RAB xtures must be wired in accordance with the National Electrical Code
and all applicable local codes. Proper grounding is required for safety. This
product must be installed in accordance with the applicable installation code
by a person familiar with the construction and operation of the product and
the hazards involved.
WARNING: Make certain power is OFF before installing or maintaining
xture.
CLEANING
Clean glass lens with nonabrasive glass cleaning solution.
CAUTION: Be sure xture temperature is cool enough to touch. Do not
clean or maintain while xture is energized.
ALED150HS 0117
INSTALLATION
Loosen and remove the four corner screws for door. Mount the house shield
housing with four longer four #8-32 stainless steel screws provided with hood.
(available in bronze and white)
Note: These instructions do not cover all details or variations in equipment nor do
they provide for every possible situation during installation, operation or maintenance.
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
RAB xtures must be wired in accordance with the National Electrical Code
and all applicable local codes. Proper grounding is required for safety. This
product must be installed in accordance with the applicable installation code
by a person familiar with the construction and operation of the product and
the hazards involved.
WARNING: Make certain power is OFF before installing or maintaining
xture.
CLEANING
Clean glass lens with nonabrasive glass cleaning solution.
CAUTION: Be sure xture temperature is cool enough to touch. Do not
clean or maintain while xture is energized.
Note: These instructions do not cover all details or variations in equipment nor do
they provide for every possible situation during installation, operation or maintenance.
Easy Answers
rabweb.com
Visit our website for product info
Tech Help Line
Call our experts - 888 722-1000
e-mail
Answered promptly - [email protected]
Free Lighting Layouts
Answered online or by request
© 2017 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
Easy Answers
rabweb.com
Visit our website for product info
Tech Help Line
Call our experts - 888 722-1000
e-mail
Answered promptly - [email protected]
Free Lighting Layouts
Answered online or by request
© 2017 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
ALED150HS 0117
Screws
WG Brackets
Housing
3 Sided Shield
Screws
WG Brackets
Housing
3 Sided Shield
INSTALLATION
Loosen and remove the four corner screws for door. Mount the house shield
housing with four longer four #8-32 stainless steel screws provided with hood.
(available in bronze and white)
-
1
RAB Lighting ALED150HSW Operating instructions
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
RAB Lighting LFBAYLED78W Operating instructions
-
RAB Lighting ALED2T125NRG/PCS2 Operating instructions
-
-
-
-
RAB Lighting SLIM62YW/BL Operating instructions
-
-
RAB Lighting FXLED300SFNB55W/PCT Operating instructions
-
RAB Lighting WPLED26N/PC2 Operating instructions
-