User Manual
VIDEO
GRABBER
CONVERTS YOUR OLD ANALOG VIDEO
INTO DIGITAL FORMAT
MT4169
2
EN
Introduction
Thank you for buying this video capture device. Please
take a moment and read this manual before using the
device.
System requirements
¯ Processor Pentium4 2.8GHz or faster,
¯ RAM 512MB or more,
¯ Graphic card with DirectX9.0C support,
¯ USB2.0 interface,
¯ Windows XP/Vista/7
Installation
Insert Software CD into CD-ROM drive, you will see fol-
lowing screen:
Select Install Driver
Follow on-screen messages to fi nish installation, if “no
windows logo” message appears – click “Continue Any-
way”.
If following screen appear select “No, I will reboot my
computer later”.
3
EN
Now plug device to USB port, “Found New Hardware
Wizard” will pop-up:
Click “Next” to automatically search for driver.
Click “Continue Anyway”.
Click “Finish” to end installation.
Now click Install Applications
Follow on-screen messages to fi nish installation.
Reboot your system. At fi rst run of application enter
key product (you can fi nd it on the envelope of Soft-
ware CD).
4
EN
Plug video source and press “Record” button to
start video capturing. Press stop to save fi le.
Go to “Edit” tab and drag icons from right panel at
bottom panel. Between clips you can drag transi-
tion eff ects.
5
EN
To burn project on CD/DVD go to “Burn” tab. Go to “Capture” tab and click “Option”.
Available options:
¯ Format: VCD, SVCD, DVD, Long DVD, WMV.
¯ Video Type: NTSC, PAL.
¯ Quality: Best, Good, Normal, Average.
¯ Split Size: 3.99GB, 4.38GB, 7.50GB.
6
EN
Specifi cation and appearance of product are subject to change
without prior notice.
For technical support please visit www.media-tech.eu.
You can send captured video to YouTube directly, just
confi gure this tab.
You can convert captured video to iPod supported
video format.
/
