VAVA VA-SH019 User manual

Type
User manual
MAGNETIC CAR PHONE MOUNT
User Guide
VA-SH019_v1.9
www.vava.com
ASIA PACIFIC
E-mail: support.jp@vava.com(JP)
JP Importer:
Shenzhen NearbyExpress Technology Development Co., Ltd.
Address: 333 Bulong Road, Shenzhen, China, 518129
Learn more about the EU Declaration of Conformity:
https://www.vava.com/downloads-VA-SH019-CE-Cert.html
E-mail: support@vava.com
Tel: 1-888-456-8468
(Monday-Friday: 9:00 – 17:00 PST)
Address: 46724 Lakeview Blvd, Fremont, CA 94538
NORTH AMERICA
E-mail:
support.uk@vava.com(UK)
support.de@vava.com(DE)
support.fr@vava.com(FR)
support.es@vava.com(ES)
support.it@vava.com(IT)
EU Importer: ZBT International Trading GmbH
Address: Halstenbeker Weg 98C, 25462 Rellingen, Deutschland
EUROPE
MANUFACTURER
MADE I N CHINA
MODEL:VASH019
Important
EN
1. This car phone mount uses high-performance adhesive.
For the best results, DO NOT TOUCH the adhesive surface after the
protective paper is removed.
2. Before mounting, regulate the ambient temperature to
18ºC - 24ºC / 64.4ºF - 75.2ºF.
3. To achieve the most stable mount, use the product after 24 hours of
installation.
4. Please install the mount on flat surface.
5. To remove the metal plate, please warm it with a hair dryer, then use
some dental floss to lift and detach it.
VHB
TM
Wichtig
DE
1. Diese Auto-Handyhalterung verwendet hochperformanten
Klebstoff. Für beste Resultate BERÜHREN Sie die Klebefläche NICHT,
nachdem die Schutzfolie entfernt wurde.
2. Regeln Sie die Umgebungstemperatur vor der Installation auf
18°C - 24°C / 64.4°F - 75.2°F.
3. Damit die Halterung so stabil wie möglich wird, nutzen Sie das
Produkt erst 24 Stunden nach Anbringung.
4. Bitte bringen Sie die Halterung auf einem ebenen Untergrund an.
5. Um die Metalleinlage zu enfernen, bitte erwärmen Sie diese mit
einem Haartrockner. Anschließend lösen Sie sie vorsichtig mit
einem Faden vom Gerät.
VHB
TM
IMPORTANT
No Touching
For One-time Use Only
Before mounting, regulate
the ambient temperature to
18ºC - 24ºC / 64.4ºF - 75.2ºF.
Press with 3kg / 6.6lbs
force for 30 seconds
Use after 24 hours
of installation
VHB
TM
18℃ ~ 24℃
Flat Surface
A l c o h o l
P r e p P a d
*1
*2
*2
*2
JP
CONTENTS
English
Deutsch
Français
Español
Italiano
01/02
03/05
06/08
09/11
12/14
15/17
VHB
TM
Support de Téléphone
Magnétique Pour Voiture *1
Base Adhésive
Supplémentaire *2
Lingette de Préparation à
Base d’Alcool*2
Plaquette Métallique *2
FR
Car Phone Mount*1
Spare Base Adhesive*2
Alcohol Prep Pad*2
Metal Sheet *2
EN
Soporte Magnético de Móvil
para Coche * 1
Adhesivo de Base de
Repuesto * 2
Toallita de Alcohol * 2
Hoja Metálica * 2
ES
Magnetische
Auto-Handyhalterung*1
Ersatz-Basiskleber*2
Reinigungs-Alkoholpad*2
Metallscheibe*2
DE
Base del Supporto*1
Adesivo per Base di Scorta *2
Salviettina Imbevuta di Alcol *2
Placchetta Metallica *2
IT
EN
Install the Metal Sheet
1. Wipe the back of your phone case with the included alcohol prep
pad. Let dry.
2. Place the metal sheet between the phone and the case, or remove
its protective paper and stick it onto phone case.
A
B
3M
1. Wipe the target spot with the included alcohol prep pad and wait
until it is fully dry.
2. Remove the protective paper from the base adhesive or replace it
with the spare one when needed.
3. Press the base with 3kg force onto the car dashboard and hold still
for 30 seconds.
4. Place your phone on the phone disc, adjust it for the best angle.
Install the Mount onto Your Car
Caution
1. In cold weather, install the mount in a well-warmed car only.
2. Do not mount the product on the airbag.
We do not recommend using this phone mount with older vehicles.
The dashboard of older vehicles may have become brittle due to sun
damage. We are not responsible for dashboard repair if any damage
occurs.
Disclaimer
01/02
This product contains strong magnet, which will not damage phones
or tablets with solid state hard drivers. But we strongly recommend
you to keep it away from credit cards, pacemakers, or hard drives.
Magnet Warning
Caution
1. Don’t stick the metal sheet on the back of phone with wireless
charging functionality.
2. It is recommended to stick the metal sheet on your phone case.
Remove the phone case before wireless charging.
3. To remove the metal plate, please warm it with a hair dryer, then
use some dental floss to lift and detach it.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

VAVA VA-SH019 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI