6
EN
Preparation before using for the first time
• Remove all protective packaging and wrapping.
• Check for the completeness of the product (water
bowl x1, screws x2, detachable power cord). In
case of incomplete delivery and damages. Please
contact supplier (See == > Warranty)
• Place all the shelves inside the appliance.
• Switch ON the appliance and adjust the temper-
ature to 90°C. The Heating indicator will light up.
• When the temperature reaches the set tempera-
ture, the heating indicator will go out.
Note: Due to manufacturing residues, the appli-
ance may emit a slight odor. This is normal and
does not indicate any defect or hazard. Make sure
the appliance is well ventilated.
• Unplug the appliance and allow appliance to cool
down completely and clean it afterwards.
(See == > Cleaning and Maintenance).
Operation
1). Preparation
• Open the glass sliding door using the door han-
dle.
• Put the food in the suitable container before plac-
ing it inside the appliance. Place it on the shelves
and close the glass sliding door.
• Ensure there is enough spacing between the food
for the heat to be evenly distributed.
• Add some water into the water bowl inside the
cabinet.
• Connect the appliance inlet of the detachable
power cord to the appliance first, then connect
power plug to a suitable electrical power outlet.
Note:
• Do not overload the shelves to avoid any damage.
Max. loading is about 8 kg.
• Do not use the shelves for storage and process-
ing of acidic, alkaline or salty food.
• There is a cover lid for protection of power cord
inlet. There are 2 screws included for fixing the
cover lid.
2). Start heating
• Switch ON the appliance by pressing the power
switch & the Heating indicator lights ON.
• Adjust the temperature setting knob (Range 30°C
to 90°C) to the desired temperature.
• When the desired temperature is reached, the
Heating indicator light goes out.
• Inside cabinet temperature can be checked with
the temperature display at the lower front side.
• The food is kept warm with the desired tempera-
ture that previously set.
• You can also switch ON the inner light by pressing
the light switch.
• Caution! Risk of burns! Always open the door us-
ing the door handle.
• Some of the parts may become very hot. Wear
gloves (not supplied) to remove the food. And do
not touch the metal shelves.
• When not in use, set the temperature setting
knob to 0°C, switch OFF the power switch and
the Heating indicator goes out.
• Unplug the appliance from the electrical power
outlet.
• Allow the appliance to cool down completely be-
fore cleaning or storage.