Samsung MIM-E03CN User manual

MIM-E03CN
Samsung
Brand
Samsung
Model
MIM-E03CN
Type
User manual

This manual is also suitable for

ߢߣ
ߢߤ
ߢߥ
ߢߧ
ߢߦ
ߢߨ
ߢߩ
A
ĮЇϩʒͱͱθ ߢߥࢩߤߪࢩߤߢߣ߫ߣࡑߥߢťđ
Ȑͱ͝ʪߣ
Ȑͱ͝ʪߤ
ߥߢ
²ʪɇϩ
Ɗʪϩ
ঌ
ঌ
ߤߪ࢏ߤ
࢏ߢ
ߤߦ
²ʪɇϩ
Ɗʪϩ
ঌ
࢏ߢ
U²Ǯ
ߦߧ
kʀͱ͝ͱ͔̈ʀ
Ɗʪϩ
ঌ
࢏ߢ
01 Operation status display
ࣚ Displays the operation/function settings and statuses.
02 Operation On/Off button (LED display)
ࣚ Turns the Air to Water Heat Pump power On/Off
03 Up/Down button
ࣚ Moves between items vertically or changes the set temperature.
04 Left/Right button
ࣚ Moves between items horizontally or changes the item value.
05 OK button
ࣚ Saves your new settings.
06 Save & Return button
ࣚ Saves your new settings and returns to the previous step.
07 Option button
ࣚ Selects the detailed setting function.
NOTE
࡙ The operation mode display on the remote controller changes
depending on the selected language.
࡙ Some functions may not be available, depending on the product
specifications.
࡙ You can see the operation status on the LED display.
ࣚ ON: Operating,
Blinking: An error occurred,
OFF: Turns off
01 Affichage de l’état de fonctionnement
ࣚ Affiche les réglages et les états du fonctionnement/de la fonction.
02 Bouton de mise en marche/arrêt (affichage LED)
ࣚ Met hors/sous tension la pompe à chaleur air-eau
03 Bouton haut/bas
ࣚ Parcourt les éléments verticalement ou modifie la température configurée.
04 Bouton gauche/droite
ࣚ Parcourt les éléments horizontalement ou modifie la valeur de l’élément.
05 Bouton OK
ࣚ Enregistre vos nouveaux réglages.
06 Bouton d’enregistrement et de retour
ࣚ Enregistre vos nouveaux réglages et retourne à l’étape précédente.
07 Bouton Option
ࣚ Sélectionne la fonction de réglage avancé.
REMARQUE
࡙ L’affichage du mode de fonctionnement sur la télécommande change
en fonction de la langue sélectionnée.
࡙ La disponibilité de certaines fonctions dépend des spécifications du
produit.
࡙ Vous pouvez voir l’état de fonctionnement sur l’affichage LED.
ࣚ ĮĘईࡠk͝˙ͱ͝ʀϩ̈ͱ͝͝ʪ͔ʪ͝ϩࡡ
Ä̷˝͝ͱϩɇ͝ϩईࡠƸ͝ʪʪθθʪЇθϑ࣭ʪϑϩΧθͱʒЇ̈ϩʪࡡ
ĮईࡠƊ࣭ʭϩʪ̈͝ϩ
01 Display stato di funzionamento
ࣚ Consente di visualizzare gli stati e le impostazioni di
funzionamento/delle varie funzioni.
02 Pulsante di accensione/spegnimento (display LED)
ࣚ Accende e spegne la pompa di calore aria/acqua
03 Pulsanti Su/Giù
ࣚ Consentono di spostarsi da un elemento all’altro in senso
verticale oppure di modificare la temperatura impostata.
04 Pulsanti Sinistra/Destra
ࣚ Consentono di spostarsi da un elemento all’altro in senso
orizzontale oppure di modificare il valore di un elemento.
05 Pulsante OK
ࣚ Consente di salvare le nuove impostazioni.
06 Pulsante Salva e indietro
ࣚ Consente di salvare le nuove impostazioni e tornare al passaggio precedente.
07 Pulsante Opzione
ࣚ Consente di selezionare la funzione delle impostazioni
dettagliate.
NOTA
࡙ La visualizzazione della modalità di funzionamento sul telecomando
varia a seconda della lingua selezionata.
࡙ A seconda delle specifiche del prodotto, alcune funzioni potrebbero
non essere disponibili.
࡙ È possibile visualizzare lo stato di funzionamento sul display LED.
ࣚ ACCENSIONE in funzione,
Lampeggiante: si è verificato un errore,
OFF: Spegnimento
01 Ǯцϒӥʪϩ̷ɇʀіϑϩɇ͝Їʒїɇ͐ɇ̈͝ɇ
ࣚ Ǯцϒӥʪϩ̷ɇЇϑϩɇӥʪ̈͝ɇ̈ϑϩɇ͝цʒїɇ͐ɇ̈͝ɇࢥ˙Ї̧͝ʀ̟̈ࢋ
02 ťθіцʀ̈ϑ̧Ǯ͐ࢋࢥǮц͐ࢋϩθцɵЇ࣍ицϒӥʪϩ̷ɇʀіøkU࣎
ࣚ Ǯ͐ɦʀіɇࢥиц͐ɦʀіɇіɇϑ̷̈ɇ̈͝ʪΧͱ͔Χцʀ̈ʪΧ͐ɇΧͱӥʪϩθіʪࣗиͱʒɇ
03 ťθіцʀ̈ϑ̧ͷθɇࢥUͷ͐
ࣚ ťͱіиɇ̷ɇΧθіʪʀ˵ͱʒїʂ͔̈˄ʒіцΧͱіцʀ̟ɇ͔̈иΧ̈ͱ̈͝ʪ̷Їɵї͔ʪ̈͝ɇʂіɇʒɇ͝ɦ
ϩʪ͔ΧʪθɇϩЇθ˄ࢋ
04 Przycisk Lewo/Prawo
ࣚ ťͱіиɇ̷ɇΧθіʪʀ˵ͱʒїʂ͔̈˄ʒіцΧͱіцʀ̟ɇ͔̈иΧͱїͱ͔̈ʪ̷Їɵї͔ʪ̈͝ɇʂ
иɇθϩͱϒʂЇϑϩɇӥʪ̈͝ɇ
05 Przycisk OK
ࣚ ȐɇΧ̈ϑЇ̟ʪ͝ͱиʪЇϑϩɇӥʪ̈͝ɇЇќцϩ̧ͱӥ̧͝ɇࢋ
06 ťθіцʀ̈ϑ̧ȐɇΧ̈ϑі̈иθͷʂ
ࣚ ťͱіиɇ̷ɇіɇΧ̈ϑɇʂ͝ͱиʪЇϑϩɇӥʪ̈͝ɇ̈Χͱиθͷʀ̈ʂʒͱΧͱΧθіʪʒ̈͝ʪ˝ͱ̧θͱ̧Їࢋ
07 Przycisk ĮΧʀ̟ɇ
ࣚ Ǯцɵ̈ʪθɇ˙Ї̧͝ʀ̟˄Їϑϩɇӥʪ͞ϑіʀіʪ˝ͷ͐ͱицʀ˵ࢋ
UWAGA
࡙ ķθɇ͝ϩθцɵЇʒїɇ͐ɇ̈͝ɇицϒӥʪϩ̷ɇ͝ц͝ɇицϒӥʪϩ̷ɇʀіЇϑϩʪθͱӥ̧͝ɇіʒɇ̷͝ʪ˝ͱ
͔ͱќʪϑ̈˄ї͔ʪ̈͝ɇʂиіɇ̷ʪќ͝ͱϒʀ̈ͱʒицɵθɇ͝ʪ˝ͱ̟˄іц̧ɇࢋ
࡙ Ę̈ʪ̧ϩͷθʪ˙Ї̧͝ʀ̟ʪ͔ͱ˝ɦ̈͝ʪɵцʂʒͱϑϩ˄Χ͝ʪиіɇ̷ʪќ͝ͱϒʀ̈ͱʒϑΧʪʀц˙̧̈ɇʀ̟̈
produktu.
࡙ Ɗϩɇ͝ʒїɇ͐ɇ̈͝ɇицϒӥʪϩ̷ɇϑ̈˄͝ɇицϒӥʪϩ̷ɇʀіЇøkUࢋ
ࣚ ǮďࢋUїɇ͐ɇࡡ
đ̈˝ɇࡠǮцϑϩɦΧ̈͐ɵ͐ɦʒࡡ
ǮǽďࢋࡠǮц͐ɦʀіͱ͝ц
01 Betriebsstatusanzeige
ࣚ Zeigt die Betriebs-/Funktionseinstellungen und Status an.
02 Betriebstaste (LED-Display)
ࣚ Schaltet die Stromversorgung der Luft-Wasser-Wärmepumpe Ein/Aus
03 Auf-/Ab-Taste
ࣚ Blättert zwischen den Elementen nach oben oder unten oder
ändert die Solltemperatur.
04 Linke/Rechte Taste
ࣚ Blättert zwischen den Elementen nach links oder rechts oder
ändert den Elementwert.
05 Taste OK
ࣚ Speichert die neuen Einstellungen.
06 Taste zum Speichern und Zurückkehren
ࣚ Speichert die neuen Einstellungen und kehrt zum vorherigen
Schritt zurück.
07 Optiontaste
ࣚ Wählt die detaillierte Einstellungsfunktion.
HINWEIS
࡙ Üʪ9ʪϩθ̈ʪɵϑ͔ͱʒЇϑɇ͝іʪ̈˝ʪɇЇ˙ʒʪθʪθ͝ɵʪʒ̈ʪ͝Ї͝˝ɘ͝ʒʪθϩϑ̈ʀ˵̟ʪ
nach der ausgewählten Sprache.
࡙ đɇ͝ʀ˵ʪЇ̧͝ϩ̈ͱ͝ʪ͝ϑ̈͝ʒ̟ʪ͝ɇʀ˵ʒʪ͝ťθͱʒЇ̧ϩϑΧʪї˙̧̈ɇϩ̈ͱ͝ʪ͝
eventuell nicht verfügbar.
࡙ Der Betriebsstatus wird auf der LED-Anzeige angezeigt.
ࣚ EIN: In Betrieb,
Blinkt: Fehler,
AUS: Ausschalten
01 Pantalla de estado de funcionamiento
ࣚ đЇʪϑϩθɇ̷ͱϑɇ̟Їϑϩʪϑцʪϑϩɇʒͱϑʒʪ̷˙Ї͝ʀ̈ͱ͝ɇ͔̈ʪ͝ϩͱͱ˙Ї͝ʀ̈ͷ͝ࢋ
02 Botón de Funcionamiento On/Off (pantalla LED)
ࣚ Activa y desactiva la bomba de calor aire-agua
03 9ͱϩͷ͝θθ̈ɵɇࢥɵɇ̟ͱ
ࣚ Se mueve verticalmente entre los elementos o cambia la
temperatura establecida.
04 Botón Izquierda/Derecha
ࣚ Se mueven horizontalmente entre los elementos o cambia
el valor del elemento.
05 Botón OK
ࣚ ЇɇθʒɇϑЇϑɇ̟Їϑϩʪϑ͝ЇʪЭͱϑࢋ
06 Botón Guardar y Volver
ࣚ ЇɇθʒɇϑЇϑ͝ЇʪЭͱϑɇ̟ЇϑϩʪϑцЭЇʪ̷Эʪɇ̷Χɇϑͱɇ͝ϩʪθ̈ͱθࢋ
07 Botón Opción
ࣚ Ɗʪ̷ʪʀʀ̈ͱ͝ɇ̷ɇ˙Ї͝ʀ̈ͷ͝ʒʪɇ̟Їϑϩʪʒʪϩɇ̷̷ɇʒͱࢋ
NOTA
࡙ La pantalla de modo de funcionamiento del control remoto
cambia según el idioma seleccionado.
࡙ Es posible que algunas funciones no estén disponibles en función
de las especificaciones del producto.
࡙ Puede ver el estado de funcionamiento en la pantalla LED.
ࣚ ENCENDIDO Funcionando,
Parpadeando: Se ha producido un error,
OFF: Apaga
A
Remote Controller Overview
EN
A
Aperçu de la télécommande
FR
A
Panoramica del telecomando
IT
A
Przegląd zdalnego sterownika
PL
A
Übersicht über die Fernbedienung
DE
A
Descripción general del control remoto
ES
Page is loading ...
Press the button to enter the Setting screen and then select the desired function or option.
01 Outdoor temperature display
ࣚ Displays outdoor temperature.
02 Date and time display
ࣚ Displays current date and time.
03 Zone 1 display
ࣚ Displays set temperature and operation modes for Zone 1.
04 Zone 2 display
ࣚ Displays set temperature and operation modes for Zone 2.
05 DHW display
ࣚ Displays set temperature and operation modes for DHW
NOTE
࡙ The Home screen may vary depending on whether Zone control is
selected at the initial installation and whether DHW is supported.
B
Home Screen Overview
EN
01 Operation status display
ࣚ Displays the operation status.
02 Quiet display
ࣚ Displays the Quiet function.
03 Outing display
ࣚ Displays the Outing function.
04 Schedule display
ࣚ Displays any of Daily schedule, Weekly schedule, Yearly
schedule, Holiday.
05 Energy display
ࣚ Displays any of Energy Usage and Energy Setting.
06 Priority A2A display
ࣚ Displays any of Priority A2A and Priority DHW.
07 Option display
ࣚ Displays the Option.
NOTE
࡙ Unavailable functions are marked inactive and they cannot be set.
࡙ In the menu with the > in the Option menu, you can select a menu
with the > button.
࡙ When you do not press any button for 180 seconds with the option
active, the settings are not saved and the Home screen appears.
E
Settings Screen Overview
01 Set temperature display
ࣚ Displays the set temperature.
02 Current temperature display
ࣚ Displays current temperature for Water Outlet.
03 Current temperature display
ࣚ Displays current temperature for Indoor.
04 Operation mode display
ࣚ Displays any of Auto, Cool, and Heat.
05 Temperature sensor display
ࣚ Displays any of Water Law, Water Outlet, and Indoor.
06 Schedule indicator
ࣚ When you are setting a schedule.
ࣚ When you are setting the operation time limit.
07 Check indicator
08 Lock indicator
09 Central Control indicator
NOTE
࡙ Unavailable functions are marked inactive and they cannot be set.
࡙ The locations of icons may differ depending on the function.
࡙ When you do not press any button for 7 seconds, the function of
the position is automatically selected.
01 Set temperature display
ࣚ Displays the set temperature.
02 Current temperature display
ࣚ Displays current temperature for Water Outlet.
03 Operation mode display
ࣚ Displays any of Economic, Standard, Power, and Forced.
04 Schedule indicator
ࣚ When you are setting a schedule.
ࣚ When you are setting the operation time limit.
05 Check indicator
06 Lock indicator
07 Central Control indicator
NOTE
࡙ Unavailable functions are marked inactive and they cannot be set.
࡙ The locations of icons may differ depending on the function.
࡙ When you do not press any button for 7 seconds, the function of
the position is automatically selected.
C
Zone Screen Overview
D
DHW Screen Overview
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Samsung MIM-E03CN User manual

MIM-E03CN
Samsung
Brand
Samsung
Model
MIM-E03CN
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents