Avery Dennison Monarch 9485 Operating instructions

Monarch 9485
Avery Dennison
Brand
Avery Dennison
Model
Monarch 9485
Type
Operating instructions

This manual is also suitable for

TC9485PEELQR Rev. AA 7/15 ©2015 Avery Dennison. All Rights Reserved.
PEELING & TEARING SUPPLIES
Use these instructions with your Monarch® 9485 printer. For more information, refer to the
User’s Manual.
Note: When loading supplies, set the paper width guide correctly:
Turn the paper width guide with your finger until the supply guides
touch the edges of your supply.
Loading Supplies for Peel Mode
1. With supply loaded, slide the peeler body in the direction shown until you hear two clicks
and see two complete triangles.
2. Press Feed.
2 clicks
Tearing Supplies
Tear the backing paper (liner) towards the front of the printer against the peel edge (shown in
red); either in a left-to-right or right-to-left motion.
Note: Do NOT pull the backing paper out of registration.
Peel Edge
Label
Backing Paper
  • Page 1 1
  • Page 2 2

Avery Dennison Monarch 9485 Operating instructions

Monarch 9485
Avery Dennison
Brand
Avery Dennison
Model
Monarch 9485
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents