Yealink Yealink SIP-T28P Quick Reference Manual
- Category
- Telephones
- Type
- Quick Reference Manual
Yealink Yealink SIP-T28P is a high quality, feature-rich IP phone designed to meet the needs of a variety of users, from small businesses to large enterprises. With its sleek design and intuitive interface, the SIP-T28P is easy to use and offers a wide range of features, including:
- High-quality audio with support for wideband codecs (G.722, G.711)
- Up to 6 SIP accounts
- 3-way conferencing
- Call waiting and call forwarding
- Call recording (with optional microSD card)
- Built-in Bluetooth for hands-free calling and headset connectivity
- PoE support for easy installation and power management
Yealink Yealink SIP-T28P is a high quality, feature-rich IP phone designed to meet the needs of a variety of users, from small businesses to large enterprises. With its sleek design and intuitive interface, the SIP-T28P is easy to use and offers a wide range of features, including:
- High-quality audio with support for wideband codecs (G.722, G.711)
- Up to 6 SIP accounts
- 3-way conferencing
- Call waiting and call forwarding
- Call recording (with optional microSD card)
- Built-in Bluetooth for hands-free calling and headset connectivity
- PoE support for easy installation and power management
www.yealink.com
You can add contacts from the call history easily. For more information, refer to above.
Press the soft key to place a call.
Select to view detailed information about the entry.
Select to add the entry to the local directory.
Select to add the entry to the blacklist.
Select to delete all the entries from the list.
Press during a call to adjust the receiver volume of the handset/speakerphone/
headset.
Press when the phone is idle to adjust the ringer volume.
Press the soft key to delete the entry from the list.
The Message Waiting Indicator on the idle screen indicates that you have new voice messages
waiting. The power indicator LED slow flashes red.
1. Press or the soft key.
2. Follow the voice prompts to listen to your voice messages.
1. Press the soft key when the phone is idle , press or to scroll through the list.
2. Select an entry from the list, you can do the following:
If you press the soft key, you can also do the following:
1. Press the soft key when the phone is idle , and then selectthe desired group.
2. Press the soft key to add a contact.
1. Press the soft key when the phone is idle , and then select the desired group.
1. Press the soft key when the phone is idle , and then selectthe desired group.
3. Press the soft key when “Delete selected contact?” prompts on the LCD screen.
1. Press the soft key when the phone is idle , and then select ->->.
2. Press or to select the desired ring tone.
3. Press the soft key to accept the change.
3. Update the contact information.
4. Press the soft key to accept the change.
4. Press the soft key to accept the change.
3. Enter a unique contact name in the field, and enter the phone number in the proper field.
2. Press or to select the desired contact, press the soft key and then select
from the prompt list.
2. Press or to select the desired contact, press the soft key and then select
from the prompt list.
For more information, refer to the User Guide available online at: Applies to firmware version 71 or later.
Copyright 2013 YEALINK NETWORK TECHNOLOGY CO.,LTD.
c
www.yealink.com
You can split the conference call into some individual calls by pressing the soft key.
SIP-T46G Quick Reference Guide
4. Hang up the handset to disconnect all parties.
1. Press the soft key when the phone is idle , and then select ->.
2. Select the desired DSS key, and then press the soft key.
4. Press the soft key to accept the change.
Press the speed dial key to dial out the preset number.
3. Select from the field, select the desired line from the field, and enter
the number in the field.
1. With the handset on-hook, press .
1. Pick up the handset.
2. Enter the number, and then press the soft key.
1. With the headset connected, press to activate the headset mode.
2. Enter the number, and then press the soft key.
During a call , you can alternate between headset, hands-free speakerphone and handset modes by
pressing the key or the key or picking up the handset. Headset mode requires a
headset connected.
You can ignore an incoming call by pressing the soft key.
2. Enter the number, and then press the soft key.
Pick up the handset.
Press .
Hang up the handset or press the soft key.
Press .
Press or the soft key.
Press the soft key.
Press to enter the list, press or to select the desired call, and then
press or the soft key.
Press twice when the phone is idle to call the last dialed number.
Press to mute the microphone during a call.
Press again to un-mute the call.
If there is only a call on hold, press or the Resume soft key.
Press or the soft key during an active call.
Incoming calls are all forwarded unconditionally.
Incoming calls are forwarded when the phone is busy.
Incoming calls are forwarded when the phone is not answered
after a preset time period.
1. Press the soft key when the phone is idle , and then select ->
2. Select the desired forward type:
3. Enter the number you want to forward to. For enter the ring time to wait
before forwarding.
4. Press the soft key to accept the change.
1. Press the soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the soft key.
3. Press the soft key again when the second party answers. All parties are now joined
in the conference.
If there is more than one call on hold, press or to select the desired call, and then
press or the soft key.
You can transfer a call in the following ways:
1. Press or the soft key during an active call. The call is placed on hold.
1. Press or the soft key during an active call. The call is placed on hold.
1. Press or the soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press .
3. Press or the soft key when the second party answers.
2. Enter the number you want to transfer to, and then press .
3. Press or the soft key when you hear the ring-back tone.
3. Press or the soft key.
2. Enter the number you want to transfer to.
-
1
-
2
Yealink Yealink SIP-T28P Quick Reference Manual
- Category
- Telephones
- Type
- Quick Reference Manual
Yealink Yealink SIP-T28P is a high quality, feature-rich IP phone designed to meet the needs of a variety of users, from small businesses to large enterprises. With its sleek design and intuitive interface, the SIP-T28P is easy to use and offers a wide range of features, including:
- High-quality audio with support for wideband codecs (G.722, G.711)
- Up to 6 SIP accounts
- 3-way conferencing
- Call waiting and call forwarding
- Call recording (with optional microSD card)
- Built-in Bluetooth for hands-free calling and headset connectivity
- PoE support for easy installation and power management
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Yealink SIP-T46G User guide
-
-
-
-
-
Yealink P-T46G Quick Reference Manual
-
-
-
-
