Noble House 69042 Operating instructions

Type
Operating instructions

This manual is also suitable for

Noble House 69042 is a dining chair designed for residential use only. It features a sturdy frame made of metal legs and a plastic seat and backrest. The chair is easy to assemble, requiring only a few simple steps. It is also lightweight and easy to move around, making it a great choice for small spaces or for use as extra seating when needed. The chair is not intended for commercial use or for use by children as a toy. It can only be used on flat, level surfaces and should not be exposed to direct sunlight for extended periods of time.

Noble House 69042 is a dining chair designed for residential use only. It features a sturdy frame made of metal legs and a plastic seat and backrest. The chair is easy to assemble, requiring only a few simple steps. It is also lightweight and easy to move around, making it a great choice for small spaces or for use as extra seating when needed. The chair is not intended for commercial use or for use by children as a toy. It can only be used on flat, level surfaces and should not be exposed to direct sunlight for extended periods of time.

Page 1 of 7Page 1 of 7
Caution : You must read this before you proceed
DINING CHAIR
CAUTION: This Chair is NOT a TOY.
Keep your child / children at bay during the assembly process.
For moving the Chair and to prevent damage to the Chair, two adults
are needed to execute this action.
Noble House Home Furnishings LLC
Page 2 of 7
Label Picture Description QTY
A Left Leg 1
B Right Leg 1
C Backrest 1
D Seat Panel 1
E Seat Cushion 1
Label Picture Description QTY
Screw (M6x45mm) 7
Bolt (M6x40mm) 3
Sleeve Nut (M6x13mm) 3
Allen Key 2
1
2
3
4
Allen Key 2
4
Noble House Home Furnishings LLC
Page 3 of 7
Before Beginning Assembly:
This Chair has multiple parts and may require up to some 30 minutes to assemble.
To give you an overview of the Chair parts, the above picture is to help you put the
OVERVIEW
Seat Cushion
(E)
Right Leg
(B)
Seat Panel
(D)
FRONT FACING
Backres
t (C)
Left Leg
(A)
various parts into perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly.
Noble House Home Furnishings LLC
Page 4 of 7
Step 1
Step 2
Unpack and place all parts on a clean, non-marring surface.
B
Step 2.1
4
4
2.1) Position Right Leg(B) and Seat Panel(D) as shown in picture
above. Secure Right Leg(B) and Seat Panel(D) using Screw(
) with
Allen Key().
2.2) Secure Right Leg(B) and Seat Panel(D) using Bolt(), and
Sleeve Nut(
) with Allen Key(
).
Only loosely tighten the Screws and Bolts.
B
D
Step 2.2
4
3
2
4
1
Noble House Home Furnishings LLC
Page 5 of 7
Step 3
With the help of your partner, turn the Chair over and rest on Right Leg(B).
Repeat the same process from the previous step to attach the Left Leg(A).
A
4
4
3
2
4
1
Step 4
Repeat the same process from the previous step to attach the Left Leg(A).
Only loosely tighten the Screws and Bolts.
Place Backrest(C) into the housing of Left Leg(A) and Right Leg(B)
You may need to apply a little pressure to the Legs, pushing outwards, to
enable the Backrest(C) to be slotted into position.
C
1
4
enable the Backrest(C) to be slotted into position.
Secure Backrest(C) and Legs using Screws(
) with Allen Key(
)
Only loosely tighten the Screws.
Noble House Home Furnishings LLC
Page 6 of 7
Step 5
Place the Chair right side up on a LEVEL SURFACE to see if it wobbles.
If it wobbles, lift the Chair to some 30cm to 50cm height from the ground.
Keep your feet and toes well away from the drop zone.
Drop the Chair freely and vertically with the four legs, hitting the ground, at the same time.
This Drop Test will help to ensure that all the Bolts, Screws and gaps all reach full
alignment status.
Test again for evenness on a LEVEL SURFACE.
If wobble
Test again
30CM~50CM
Step 6
Test again for evenness on a LEVEL SURFACE.
If no wobbles are found, proceed to tighten all the Screws, and Bolts.
CAUTION: When tightening the Screws, and Bolts tighten sequentially. DO NOT
tighten any Bolt, or Screw fully and then move towards the next one. This could
cause the frame to warp.
If there are still wobbles, loosen the Screws and Bolts and execute this same drop tests.
If the Chair is not stable, it could lead to damage to the product.
Inspect the Chair and make sure all parts are adequately connected.
Place Seat Cushion(C) on to the seat of the Chair using the velcro straps as shown
Place Seat Cushion(C) on to the seat of the Chair using the velcro straps as shown
above.
Your Chair is ready for use.
This Chair can only be used on a flat, level surface.
Noble House Home Furnishings LLC
Page 7 of 7
OUTDOOR
Noble House Home Furnishings LLC
Caution : You must read this before you proceed
TABLE
CAUTION : This Table is NOT a TOY.
Keep your child / children at bay during the assembly process.
For moving
the Table and to prevent damage to the Table, two adults are needed to
execute this action.
Noble House Home Furnishings LLC
Page 1/6
Label Picture Description QTY
B Leg 4
Label Picture Description QTY
13
1
Before Beginning Assembly:
Noble House Home Furnishings LLC
Page 2/6
A Table Top 1
Washer
(M8.5/20x2mm)
Allen key
2
Bolt (M8x20mm) 13
OVERVIEW
This Table has multiple parts and may require up to 30 minutes to assemble. To
give you an overview of the Table parts, the above picture is to help you put the
various parts into perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly.
Step 1
familiarise yourself with the parts and steps before assembly.
Noble House Home Furnishings LLC
Page 3/6
Unpack and place all parts on a clean, non-marring surface.
FRONT FACING
Leg (B)
Table Top (A)
Step 2
Step 3
Noble House Home Furnishings LLC
Page 4/6
A
A
B
3
1
2
With assistance from your adult partner, carefully place the Table Top(A) facedown.
Attach Leg(B) to Table Top(A) using Bolts(), and Washers(), with Allen Key().
Do not fully tighten the Bolts.
Repeat the same process with the remaining three Legs(B).
Step 4
Noble House Home Furnishings LLC
Page 5/6
Stand the Table up, with assistance from your adult partner.
Exert pressure floorwards, onto the Table with both your hands.
This pressure will help the Legs and Table Top reach full alignment status.
Check for wobbles on a LEVEL surface.
If no wobbles are found proceed to tighten the Bolts in a sequential manner, until evenly
secured.
When tightening the Bolts tighten sequentially.
Do not tighten any Bolt fully and then move on towards the next one.
If there are still wobbles, loosen the Bolts and excute the same above process.
Your Table is ready for use.
This Table can only be used on the flat, level surface.
Do not clean furniture with harsh cleansers or polish.
Do not put hot items directly on furniture surface
Children should not climb or jump on the furniture.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is
recommended.
Do not write on furniture without a padded barrier to protect the surface.
Not for commercial use. For residential use only.
Stains may be removed with mild soap solution and damp cloth.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
To obtain the longest lifespan of your outdoor products, avoid extended and lengthy
exposure to rain, snow, and direct sunshine. Whenever possible cover the product and
/or place under patio or awnings.
Noble House Home Furnishings LLC
Page 6/6
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

Noble House 69042 Operating instructions

Type
Operating instructions
This manual is also suitable for

Noble House 69042 is a dining chair designed for residential use only. It features a sturdy frame made of metal legs and a plastic seat and backrest. The chair is easy to assemble, requiring only a few simple steps. It is also lightweight and easy to move around, making it a great choice for small spaces or for use as extra seating when needed. The chair is not intended for commercial use or for use by children as a toy. It can only be used on flat, level surfaces and should not be exposed to direct sunlight for extended periods of time.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI